在FreeBSD下配置nrpe服務

安裝nrpe

將以下軟件包上傳到相應目錄，安裝步驟如下：

nagios-plugins-1.4.15.tar.gz

nrpe-2.12.tar.gz

pw useradd nagios -d /home/nagios -s /usr/sbin/nologin

tar zxvf nagios-plugins-1.4.15.tar.gz

cd nagios-plugins-1.4.15

./configure --prefix=/usr/local/nagios --with-nagios-user=nagios --with-nagios-group=nagios

make && make install

cd

tar zxvf nrpe-2.12.tar.gz

cd nrpe-2.12

./configure --enable-ssl --with-nrpe-user=nagios --with-nrpe-group=nagios --with-nagios-user=nagios --with-nagios-group=nagios

make all

make install-plugin

make install-daemon

make install-daemon-config

cd

vi /usr/local/nagios/etc/nrpe.cfg

修改內容如下：

刪除199-203行

查找allowed_hosts=127.0.0.1，修改為allowed_hosts=127.0.0.1,115.182.59.202      //115.182.59.202為nagios服務器端ip

echo 'command[check_load]=/usr/local/nagios/libexec/check_load -w 15,10,5 -c 30,25,20' >> /usr/local/nagios/etc/nrpe.cfg

echo 'command[check_swap]=/usr/local/nagios/libexec/check_swap -w 20% -c 10%' >> /usr/local/nagios/etc/nrpe.cfg

echo 'command[check_root]=/usr/local/nagios/libexec/check_disk -w 20% -c 10% -p /' >> /usr/local/nagios/etc/nrpe.cfg

echo 'command[check_data]=/usr/local/nagios/libexec/check_disk -w 20% -c 10% -p /data' >> /usr/local/nagios/etc/nrpe.cfg

echo 'command[check_usr]=/usr/local/nagios/libexec/check_disk -w 20% -c 10% -p /usr' >> /usr/local/nagios/etc/nrpe.cfg

echo 'command[check_var]=/usr/local/nagios/libexec/check_disk -w 20% -c 10% -p /var' >> /usr/local/nagios/etc/nrpe.cfg

echo 'command[check_zombie_procs]=/usr/local/nagios/libexec/check_procs -w 5 -c 10 -s Z' >> /usr/local/nagios/etc/nrpe.cfg

echo 'command[check_total_procs]=/usr/local/nagios/libexec/check_procs -w 300 -c 450' >> /usr/local/nagios/etc/nrpe.cfg

chown -R nagios:nagios /usr/local/nagios

awk 'BEGIN{print "nrpe\t\t5666/tcp   #NRPE"}' >> /etc/services 

/usr/local/nagios/bin/nrpe -c /usr/local/nagios/etc/nrpe.cfg -d

sockstat -4l|grep nrpe

重啟nrpe

pkill nrpe

/usr/local/nagios/bin/nrpe -c /usr/local/nagios/etc/nrpe.cfg -d

配置開機自動啟動

vi /etc/rc.local              

內容如下：

#!/bin/sh

/usr/local/nagios/bin/nrpe -c /usr/local/nagios/etc/nrpe.cfg -d