Nagios監控平臺之五：監控linux主機的CPU溫度

　　　我的機房沒有溫度報警裝置，我用此方法實現對機房溫度的掌控，如果只有一臺報警，則可認為單機故障，如果幾臺同時報警，則可認為機房空調出現了問題。具體實現方法如下：

環境：被監控機：CentOS 6.3

1、安裝硬件傳感器監控軟件　sensors

#yum　install lm_sensors*

2、運行sensors-detect進行傳感器檢測

#sensors-detect ##一路回車即可，此步我在虛擬機下報錯，但在物理機上沒有問題

3、運行sensors看是否能讀取數據，如下像下面這樣表示正常：

[root@rd02 ~]# sensors

coretemp-isa-0000

Adapter: ISA adapter

Core 0: +32.0°C (high = +76.0°C, crit = +100.0°C)

Core 1: +32.0°C (high = +76.0°C, crit = +100.0°C)

4、#vi /usr/local/nagios/libexec/check_cputemp ##粘貼如下#號之間的內容

##########################################################

#!/bin/sh

#########check_cputemp###########

#date : May 2011

#Licence GPLv2

#INSTALLATION

#the script need to install lm_sensors

#sensors's output need like below format

#########################################

#coretemp-isa-0000#

#Adapter: ISA adapter#

#Core 0: +27°C (high = +85°C)#

#

#coretemp-isa-0001#

#Adapter: ISA adapter#

#Core 1: +25°C (high = +85°C) #

#########################################

#you can use NRPE to define service in nagios

#check_nrpe!check_cputemp.sh

# Plugin return statements

STATE_OK=0

STATE_WARNING=1

STATE_CRITICAL=2

STATE_UNKNOWN=3

print_help_msg(){

$Echo "Usage: $0 -h to get help."

}

print_full_help_msg(){

$Echo "Usage:"

$Echo "$0 [ -v ] -m sensors -w cpuT -c cpuT"

$Echo "Sepicify the method to use the temperature data sensors."

$Echo "And the corresponding Critical value must greater than Warning value."

$Echo "Example:"

$Echo "${0} -m sensors -w 40 -c 50"

}

print_err_msg(){

$Echo "Error."

print_full_help_msg

}

to_debug(){

if [ "$Debug" = "true" ]; then

$Echo "$*" >> /var/log/check_sys_temperature.log.$$ 2>&1

fi

}

unset LANG

Echo="echo -e"

if [ $# -lt 1 ]; then

print_help_msg

exit 3

else

while getopts :vhm:w:c: OPTION

do

case $OPTION

in

v)

#$Echo "Verbose mode."

Debug=true

;;

m)

method=$OPTARG

;;

w)

WARNING=$OPTARG

;;

c)

CRITICAL=$OPTARG ;;

h)

print_full_help_msg

exit 3

;;

?)

$Echo "Error: Illegal Option."

print_help_msg

exit 3

;;

esac

done

if [ "$method" = "sensors" ]; then

use_sensors="true"

to_debug use_sensors

else

$Echo "Error. Must to sepcify the method to use sensors."

print_full_help_msg

exit 3

fi

to_debug All Values are \" Warning: "$WARNING" and Critical: "$CRITICAL" \".
fi

#########lm_sensors##################

if [ "$use_sensors" = "true" ]; then

sensorsCheckOut=`which sensors 2>&1`

if [ $? -ne 0 ];then

echo $sensorsCheckOut

echo Maybe you need to check your sensors.

exit 3

fi

to_debug Use $sensorsCheckOut to check system temperature

TEMP1=`sensors | head -3 | tail -1 | gawk '{print $3}' | grep -o [0-9][0-9]`

TEMP2=`sensors | head -4 | tail -1 | gawk '{print $3}' | grep -o [0-9][0-9]`

SUM=$(( $TEMP1 + $TEMP2 ))

TEMP=$(($SUM/2))

if [ -z "$TEMP" ] ; then

$Echo "No Data been get here. Please confirm your ARGS and re-check it with Verbose mode, then to check the log."

exit 3

fi

to_debug temperature data is $TEMP

else

$Echo "Error. Must to sepcify the method to use sensors"

print_full_help_msg

exit 3

fi

######### Comparaison with the warnings and criticals thresholds given by user############

CPU_TEMP=$TEMP

#if [ "$WARNING" != "0" ] || [ "$CRITICAL" != "0" ]; then

if [ "$CPU_TEMP" -gt "$CRITICAL" ] && [ "$CRITICAL" != "0" ]; then

STATE="$STATE_CRITICAL"

STATE_MESSAGE="CRITICAL"

to_debug $STATE , Message is $STATE_MESSAGE

elif [ "$CPU_TEMP" -gt "$WARNING" ] && [ "$WARNING" != "0" ]; then

STATE="$STATE_WARNING"

STATE_MESSAGE="WARNING"

to_debug $STATE , Message is $STATE_MESSAGE

else

STATE="$STATE_OK"

STATE_MESSAGE="OK"

to_debug $STATE , Message is $STATE_MESSAGE

fi

echo "The TEMPERATURE "$STATE_MESSAGE" "-" The CPU's Temperature is "$CPU_TEMP" ℃ !"

exit $STATE

##########################################################

5、賦予上述腳本執行權限：

#chmod +x /usr/local/nagios/libexec/check_cputemp

6、配置nrpe.cfg，添加如下一行：

command[check_cputemp]=/usr/local/nagios/libexec/check_cputemp -m sensors -w 38 -c 45

注意：以上六步均在被監控機上完成。

7、在Nagios服務器配置服務：

define service{

use generic-service

host_name <hostname>

service_description CPU Temperature

check_command check_nrpe!check_cputemp

}

保存后重啟nagios服務即可。

最后掛個公司網站的連接：移動支付