nagios監控vsphere ESXi主機硬件狀態(CPU風扇、電源模塊、硬盤、溫度)

nagios監控vsphere ESXi主機硬件狀態(CPU風扇、電源模塊、硬盤、溫度)

esxi 的只讀賬戶和密碼(本文以chkhardware/chkreadonly為例)
插架下載地址,此地址附有相關說明:http://www.claudiokuenzler.com/nagios-plugins/check_esxi_hardware.php

ESXI主機:DELL R410
ESXI版本:ESXI4.0

配置
1)check_esxi_hardware.py 復制到nagios插件目錄/usr/local/nagios/libexec
2)command.cfg
要實現如下的效果: -U 用戶名 -P 密碼
check_esxi_hardware.py -H 192.168.0.130 -U chkhardware -P chkreadonly -V dell
下面這是根據模板,按照實際環境添加的內容:commands.cfg
# 'check_esxi_hardware' command definition   chkhardware/chkreadonly
define command{
        command_name check_esxi_hardware
        command_line $USER1$/check_esxi_hardware.py -H $HOSTADDRESS$ -U $ARG1$ -P $ARG2$ -t $ARG3$ -V $ARG4$
}

增加監控主機,在主機配置文件中
# chkhardware/chkreadonly
define service{
         use                              remote-service
         host_name                        vsphere.0.xxx
         service_description              check_esxi_hardware
         check_command                    check_esxi_hardware!chkhardware!chkreadonly!500!dell
}

新建一只讀帳號,進行測試
# /root/check_esxi_hardware.py -H 192.168.0.130 -U chkhardware -P chkreadonly -V dell
OK - Server: Dell Inc. PowerEdge R410 s/n: 2FPTV2X System BIOS: 1.3.9 2010-04-07

這個腳本用到了PyWEEM模塊，如果機器上沒有，需要安裝的：

PyWEEM模塊主頁：http://pywbem.sourceforge.net/

# wget http://downloads.sourceforge.net/project/pywbem/pywbem/pywbem-0.7/pywbem-0.7.0.tar.gz?r=http%3A%2F%2Fsourceforge.net%2Fprojects%2Fpywbem%2Ffiles%2Fpywbem%2F&ts=1299742557&use_mirror=voxel

# tar -xvzf pywbem-0.7.0.tar.gz

# cd pywbem-0.7.0

# python setup.py build

# python setup.py install

####

參考文檔：

http://www.claudiokuenzler.com/nagios-plugins/check_esxi_hardware.php#PasswordFile

http://blog.163.com/x_b_xuebi/blog/static/59649492201135102817844/