cisco ap 1200 升級IOS或恢復(fù)

cisco ap 1200 升級IOS

首先打開cisco tftp工具，然后連接console線，重啟進(jìn)入 ：模式，

ap: ?
看是否支持set命令，一般都支持然后如下配置，和router 上類似
配置ip 地址
ap: set IP_ADDR 1.1.1.1     (配置ap本地地址)
ap: set NETMASK 255.255.255.0
ap: set DEFAULT_ROUTER 1.1.1.2 (tftp address)
ap: tftp_init
ap: BOOT=tftp://1.1.1.2/c1200-k9w7-mx.123-2.JA
這時候你可以看看set 的情況
ap:set
BOOT=tftp://1.1.1.2/c1200-k9w7-mx.123-2.JA
DEFAULT_ROUTER=1.1.1.2
ENABLE_BREAK=yes
IOS_STATIC_IP_ADDR=1.1.1.1
IOS_STATIC_NETMASK=255.255.255.0  
IP_ADDR=1.1.1.1
MANUAL_BOOT=no
NETMASK=255.255.255.0
然后手動的boot
ap:boot
Loading "tftp://43.82.33.2/c1200-k9w7-mx.123-2.JA"...#########################################################################################################################################################################################################################################################################################################################################################################

File "tftp://43.82.33.2/c1200-k9w7-mx.123-2.JA"uncompressed and installed, entry point: 0x3000
executing...

             Restricted RightsLegend

Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.

          cisco Systems, Inc.
          170 West Tasman Drive
          San Jose, California 95134-1706



Cisco Internetwork Operating System Software
IOS (tm) C1200 Software (C1200-K9W7-M), Version 12.3(2)JA, RELEASE SOFTWARE(fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2004 by cisco Systems, Inc.
Compiled Mon 08-Nov-04 12:47 by ccai
Image text-base: 0x00003000, data-base: 0x0064854C

Initializing flashfs...

flashfs[1]: 138 files, 7 directories
flashfs[1]: 0 orphaned files, 0 orphaned directories
flashfs[1]: Total bytes: 7741440
flashfs[1]: Bytes used: 1149440
flashfs[1]: Bytes available: 6592000
flashfs[1]: flashfs fsck took 2 seconds.
flashfs[1]: Initialization complete....done Initializing flashfs.

This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to
export@cisco.com.

cisco AIR-AP1220-IOS-UPGRD (PowerPC405GP) processor with 14326K/2048K bytes ofmemory.
Processor board ID VDF0652Q0WL
PowerPC405GP CPU at 196Mhz, revision number 0x00C4
Last reset from power-on
Bridging software.
1 FastEthernet/IEEE 802.3 interface(s)
1 802.11 Radio(s)

32K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address: 00:0B:BE:B0:03:B7
Part Number                         : 0-0000-00
PCA Assembly Number               : 000-00000-00
PCA Revision Number               :
PCB Serial Number                   : VDF0652Q0WL
Top Assembly Part Number          : 000-00000-00
Top Assembly Serial Number           :
Top Revision Number               :
Product/Model Number                : AIR-AP1220-IOS-UPGRD



Press RETURN to get started!


*Mar   1 00:00:05.828: %LINK-3-UPDOWN: Interface FastEthernet0,changed state to up
*Mar   1 00:00:06.829: %LINEPROTO-5-UPDOWN: Line protocol onInterface FastEthernet0, changed state to down
*Mar   1 00:00:14.749: %LINEPROTO-5-UPDOWN: Line protocol onInterface FastEthernet0, changed state to up
*Mar   1 00:00:24.967: %SYS-5-RESTART: System restarted --
Cisco Internetwork Operating System Software
IOS (tm) C1200 Software (C1200-K9W7-M), Version 12.3(2)JA, RELEASE SOFTWARE(fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2004 by cisco Systems, Inc.
Compiled Mon 08-Nov-04 12:47 by ccai
*Mar   1 00:00:24.967: %SNMP-5-COLDSTART: SNMP agent on host ap isundergoing a cold start
*Mar   1 00:00:25.007: %DOT11-6-FREQ_SCAN: Interface Dot11Radio0,Scanning frequencies
*Mar   1 00:00:25.928: %LINEPROTO-5-UPDOWN: Line protocol onInterface BVI1, changed state to up
*Mar   1 00:00:25.980: %LINEPROTO-5-UPDOWN: Line protocol onInterface Dot11Radio0, changed state to down
*Mar   1 00:00:26.988: %DOT11-6-FREQ_SCAN: Interface Dot11Radio0,Scanning frequencies
*Mar   1 00:00:27.011: %DOT11-6-FREQ_SCAN: Interface Dot11Radio0,Scanning frequencies
*Mar   1 00:00:48.294: %DOT11-6-FREQ_INUSE: Interface Dot11Radio0,frequencies in use: 2412 2437 2452
*Mar   1 00:00:48.294: %DOT11-6-FREQ_USED: Interface Dot11Radio0,frequency 2422 selected
*Mar   1 00:00:48.298: %LINK-3-UPDOWN: Interface Dot11Radio0, changedstate to up
*Mar   1 00:00:49.299: %LINEPROTO-5-UPDOWN: Line protocol onInterface Dot11Radio0, changed state to up
ap>en
Password:
ap#。。
以后可以在 記事本上編輯這樣的命令 就可以了
ap#
ap#conf t
Enter configuration commands, one per line.   End with CNTL/Z.
ap(config)#
ap(config)#boot sy
ap(config)#boot systemtftp://43.82.33.2/c1200-k9w7-mx.123-2.JAap(config)#do wr
ap#reload
Proceed with reload? [confirm]
Radio system: delayed or multiple reload request, ignored
Radio system is preparing for reload...
Radio system is ready for reload.
*Mar   1 00:01:43.081: %SYS-5-RELOAD: Reload requested by console.Reload Reason: Reload command.Xmodem file system is available.
flashfs[0]: 139 files, 7 directories
flashfs[0]: 0 orphaned files, 0 orphaned directories
flashfs[0]: Total bytes: 7741440
flashfs[0]: Bytes used: 1150976
flashfs[0]: Bytes available: 6590464
flashfs[0]: flashfs fsck took 9 seconds.
Reading cookie from flash parameter block...done.
Base ethernet MAC Address: 00:0b:be:b0:03:b7
Initializing ethernet port 0...
Reset ethernet port 0...
Reset done!
ethernet link up, 100 mbs, full-duplex
Ethernet port 0 initialized: link is up
Loading "tftp://43.82.33.2/c1200-k9w7-mx.123-2.JA"...#########################################################################################################################################################################################################################################################################################################################################################################Sample Text