您好,登錄后才能下訂單哦!
這篇文章主要介紹“until封裝watch常用邏輯簡化代碼怎么寫”,在日常操作中,相信很多人在until封裝watch常用邏輯簡化代碼怎么寫問題上存在疑惑,小編查閱了各式資料,整理出簡單好用的操作方法,希望對大家解答”until封裝watch常用邏輯簡化代碼怎么寫”的疑惑有所幫助!接下來,請跟著小編一起來學習吧!
結合文檔的介紹,筆者寫了如下的demo代碼:
<script setup lang="ts"> import { until , invoke } from '@vueuse/core' import {ref} from 'vue' const source = ref(0) invoke(async () => { await until(source).toBe(4) console.log('滿足條件了') }) const clickedFn = () => { source.value ++ } </script> <template> <div>{{source}}</div> <button @click="clickedFn"> 點擊按鈕 </button> </template>
如上代碼所示,規定了當source的值為4的時候觸發執行watch回調函數。這里使用到了invoke方法,我們之前接觸過,源碼如下
export function invoke<T>(fn: () => T): T { return fn() }
給定參數fn為一個函數,invoke返回函數的執行結果。代碼運行效果如下圖所示:
當點擊次數達到4次時,打印了相應的信息。
until代碼較多,先看兩張預覽圖,了解一下其大概實現:
通過以上兩張圖片我們看到until內部定義了很多的用于判斷條件是否滿足的方法,最后返回的instance也是包含這些方法的對象。下面我們對這些方法逐個分析。
function toMatch( condition: (v: any) => boolean, { flush = 'sync', deep = false, timeout, throwOnTimeout }: UntilToMatchOptions = {}, ): Promise<T> { let stop: Function | null = null const watcher = new Promise<T>((resolve) => { stop = watch( r, (v) => { if (condition(v) !== isNot) { stop?.() resolve(v) } }, { flush, deep, immediate: true, }, ) }) const promises = [watcher] if (timeout != null) { promises.push( promiseTimeout(timeout, throwOnTimeout) .then(() => unref(r)) .finally(() => stop?.()), ) } return Promise.race(promises) }
在promise構造函數的參數函數中調用watch API來監聽數據源r 。當數據源r的新值代入到條件condition中,使得condition為true時則調用stop停止監聽數據源,并將promise狀態變?yōu)槌晒Α?/p>
promise放入promises數組中,如果用戶傳了timeout選項則promises放入調用promiseTimeout返回的promise實例。最后返回的是Promise.race的結果??匆幌聀romiseTimeout的代碼:
export function promiseTimeout( ms: number, throwOnTimeout = false, reason = 'Timeout', ): Promise<void> { return new Promise((resolve, reject) => { if (throwOnTimeout) setTimeout(() => reject(reason), ms) else setTimeout(resolve, ms) }) }
promiseTimeout返回了一個promise, 如果throwOnTimeout為true則過ms毫秒之后則將promise變?yōu)槭顟B(tài),否則經過ms毫秒后調用resolve,使promise變?yōu)槌晒顟B(tài)。
function toBe<P>(value: MaybeRef<P | T>, options?: UntilToMatchOptions) { if (!isRef(value)) return toMatch(v => v === value, options) const { flush = 'sync', deep = false, timeout, throwOnTimeout } = options ?? {} let stop: Function | null = null const watcher = new Promise<T>((resolve) => { stop = watch( [r, value], ([v1, v2]) => { if (isNot !== (v1 === v2)) { stop?.() resolve(v1) } }, { flush, deep, immediate: true, }, ) }) // 和toMatch相同部分省略 }
toBe方法體大部分和toMatch相同,只是watch回調函數不同。這里對數據源r和toBe的參數value進行監聽,當r的值和value的值相同時,使promise狀態為成功。注意這里的watch使用的是偵聽多個源的情況。
function toBeTruthy(options?: UntilToMatchOptions) { return toMatch(v => Boolean(v), options) } function toBeNull(options?: UntilToMatchOptions) { return toBe<null>(null, options) } function toBeUndefined(options?: UntilToMatchOptions) { return toBe<undefined>(undefined, options) } function toBeNaN(options?: UntilToMatchOptions) { return toMatch(Number.isNaN, options) }
toBeTruthy和toBeNaN是對toMatch的封裝,toBeNull和toBeUndefined是對toBe的封裝。toBeTruthy判斷是否為真值,方法是使用Boolean構造函數后判斷參數v是否為真值。
toBeNaN判斷是否為NAN, 使用的是Number的isNaN作為判斷條件,注意toBeNaN的實現不能使用toBe, 因?yàn)閠obe在做比較的時候使用的是 ‘===’這對于NaN是不成立的:
toBeNull用于判斷是否為null,toBeUndefined用于判斷是否為undefined。
function toContains( value: any, options?: UntilToMatchOptions, ) { return toMatch((v) => { const array = Array.from(v as any) return array.includes(value) || array.includes(unref(value)) }, options) }
判斷數據源v中是否有value,Array.from把v轉換為數組,然后使用includes方法判斷array中是否包含value。
function changed(options?: UntilToMatchOptions) { return changedTimes(1, options) } function changedTimes(n = 1, options?: UntilToMatchOptions) { let count = -1 // skip the immediate check return toMatch(() => { count += 1 return count >= n }, options) }
changed用于判斷是否改變,通過調用changedTimes和固定第一參數n為1實現的。changedTimes的第一個參數為監聽的數據源改變的次數,也是通過調用toMatch實現的,傳給toMatch的條件是一個函數,此函數會在數據源改變時調用。每調用一次外層作用域定義的count就會累加一次 ,注意外層作用域count變量聲明為-1, 因?yàn)闀r(shí)立即監聽的。
至此,until源碼內定義的函數全部分析完畢,下圖總結了這些函數之前的調用關系:
源碼中最后的返回值也值得我們說一說。
until的返回值分為兩種情況:當監聽的源數據是數組時和不是數組時,代碼如下圖所示:
if (Array.isArray(unref(r))) { const instance: UntilArrayInstance<T> = { toMatch, toContains, changed, changedTimes, get not() { isNot = !isNot return this }, } return instance } else { const instance: UntilValueInstance<T, boolean> = { toMatch, toBe, toBeTruthy: toBeTruthy as any, toBeNull: toBeNull as any, toBeNaN, toBeUndefined: toBeUndefined as any, changed, changedTimes, get not() { isNot = !isNot return this }, } return instance }
我們看到數據源時數組時返回的方法中沒有toBeTruthy,toBeNull,toBeNaN,toBeUndefined這些用于判斷基本類型值的方法。另外需要注意的是返回的instance里面有一個get not(){// ...}
這是使用getters, 用于獲取特定的屬性(這里是not)。在getter里面對isNot取反,isNot返回值為this也就是instance本身,所以讀取完not屬性后可以鏈?zhǔn)秸{(diào)用其他方法,如下所示:
await until(ref).not.toBeNull() await until(ref).not.toBeTruthy()
到此,關于“until封裝watch常用邏輯簡化代碼怎么寫”的學習就結束了,希望能夠解決大家的疑惑。理論與實踐的搭配能更好的幫助大家學習,快去試試吧!若想繼續學習更多相關知識,請繼續關注億速云網站,小編會繼續努力為大家?guī)砀鄬?shí)用的文章!
免責聲明:本站發布的內容(圖片、視頻和文字)以原創、轉載和分享為主,文章觀點不代表本網站立場,如果涉及侵權請聯系站長郵箱:is@yisu.com進行舉報,并提供相關證據,一經查實,將立刻刪除涉嫌侵權內容。