您好,登錄后才能下訂單哦!
今天小編給大家分享一下vue怎么一步到位實現動態路由的相關知識點,內容詳細,邏輯清晰,相信大部分人都還太了解這方面的知識,所以分享這篇文章給大家參考一下,希望大家閱讀完這篇文章后有所收獲,下面我們一起來了解一下吧。
首先呢,先看看靜態路由的配置,簡單預覽一下,熟悉的可以直接跳過,說這部分,是為了熟悉一下路由的配置,配置動態路由其實就是把靜態路由存到數據庫,在取出來放進路由表(靜態是直接寫在路由表里)。
1.創建router/index.js文件,這里只有一些簡單的頁面
import Vue from 'vue' import Router from 'vue-router' import Login from '@/view/login/Login' import Index from '@/layout/Index' import Welcome from '@/layout/welcome/Welcome' Vue.use(Router) export default new Router({ routes: [ { path: '/login', name: 'Login', component: Login }, { path: '/', component: Index, redirect: '/welcome', meta: {requireAuth: true}, children: [ { path: '/welcome', component: Welcome, name: '首頁', meta: {title: '首頁', requireAuth: true} } ] } ] })
2.創建router/permission.js文件,配置導航守衛,可以在每次路由跳轉前做一些操作,待會獲取動態路由操作也在這里配置
import router from '@/router/index' import 'element-ui/lib/theme-chalk/index.css' import '@fortawesome/fontawesome-free/css/all.min.css' import NProgress from 'nprogress' import 'nprogress/nprogress.css' NProgress.configure({ easing: 'ease', // 動畫方式 speed: 500, // 遞增進度條的速度 showSpinner: false, // 是否顯示加載ico trickleSpeed: 200, // 自動遞增間隔 minimum: 0.3 // 初始化時的最小百分比 }) // 白名單 const whiteList = ['/login'] // no redirect whitelist // 導航守衛 router.beforeEach((to, from, next) => { NProgress.start() if (to.meta.requireAuth) { // 判斷該路由是否需要登錄權限 if (sessionStorage.getItem('loginName') !== null) { // 判斷本地是否存在token next() // 這里是待會獲取異步路由的地方 } else { // 未登錄,跳轉到登陸頁面 next({ path: '/login' }) } } else { if (whiteList.indexOf(to.path) !== -1) { next() } else { if (sessionStorage.getItem('loginName') !== null) { // 判斷本地是否存在token next(`/?redirect=${to.path}`) } else { next(`/login?redirect=${to.path}`) } } } }) router.afterEach(() => { // 在即將進入新的頁面組件前,關閉掉進度條 NProgress.done() })
這里引用了一個插件,Nprogress,就是下圖的藍色小進度條。不用也可以
3.在main.js里引入剛才創建的router下的index.js文件和permission.js文件,如下
import router from '@/router' import './router/permission' new Vue({ el: '#app', router, store, components: { App }, template: '<App/>' })
4.在App入口中放入路由跳轉的視圖區,跳轉的路由頁面都顯示在這里
// APP.vue文件 <div id="app"> <router-view /> </div>
現在靜態路由就配好了,可以正常的跳轉了!
文件夾長這樣
接下來開始配置動態路由了!
有坑的地方我會說明一下。
1.首先呢,router/index.js,沒有什么需要改的,把你需要動態獲取的路由信息刪除掉即可,可以留一部分靜態路由,如登錄頁,首頁等等,若全刪,routes賦為[]即可。
2.創建一個文件,我命名為getAsyncRouter.js,用來處理獲取到的動態路由信息。
// 用于處理動態菜單數據,將其轉為 route 形式 export function fnAddDynamicMenuRoutes (menuList = [], routes = []) { // 用于保存普通路由數據 let temp = [] // 用于保存存在子路由的路由數據 let route = [] // 遍歷數據 for (let i = 0; i < menuList.length; i++) { // 存在子路由,則遞歸遍歷,并返回數據作為 children 保存 if (menuList[i].children && menuList[i].children.length > 0) { // 獲取路由的基本格式 route = getRoute(menuList[i]) // 遞歸處理子路由數據,并返回,將其作為路由的 children 保存 route.children = fnAddDynamicMenuRoutes(menuList[i].children) // 保存存在子路由的路由 routes.push(route) } else { // 保存普通路由 temp.push(getRoute(menuList[i])) } } // 返回路由結果 return routes.concat(temp) } // 返回路由的基本格式 function getRoute (item) { // 路由基本格式 let route = { // 路由的路徑 path: item.url, // 路由名 name: item.name, // 路由所在組件 // component: (resolve) => require([`@/layout/Index`], resolve), component: (resolve) => require([`@/view${item.curl}`], resolve), meta: { id: item.id, icon: item.icon }, // 路由的子路由 children: [] } // 返回 route return route }
這里是兩個函數,把獲取到的數據處理成路由表數據,將其變化成 route 的形式。
fnAddDynamicMenuRoutes
用于遞歸菜單數據。
getRoute
用于返回某個數據轉換的 路由格式。
注釋寫的應該算是很詳細了,主要講一下思路:
對數據進行遍歷,
定義兩個數組(temp,route),temp 用于保存沒有子路由的路由,route 用于保存存在子路由的路由。
如果某個數據存在 子路由,則對子路由進行遍歷,并將其返回結果作為當前數據的 children。并使用 route 保存路由。
如果某個數據不存在子路由,則直接使用 temp 保存路由。
最后,返回兩者拼接的結果,即為轉換后的數據。
route 格式一般如下:
path
:指路由路徑(可以根據路徑定位路由)。
name
:指路由名(可以根據路由名定位路由)。
component
:指路由所在的組件。
children
:指的是路由組件中嵌套的子路由。
meta
:用于定義路由的一些元信息。
這里有個大坑!?。?nbsp;在配置component的時候,需要動態導入組件,也就是vue異步組件,查看文檔如下
可知,有兩種導入方式,import和require方式。這里簡單說一下,
1 import屬于es6導入方式,只支持靜態導入,也就是說,你不能夠使用變量或表達式,只能使用字符串。
2 require屬于commonJS方式,可以支持動態的導入,但筆者嘗試中,可以使用``模板字符串方式,貌似也無法直接使用變量。這里盡量用字符串拼接,而不是用變量去代替拼接的字符串!
由于import不支持動態導入方式,筆者采用的是require的方式,并且在webpack文檔中有這樣一段話。
綜上所述,就是說,組件的導入可以使用字符串拼接的方式導入,可以使用模板字符串導入(字符串中含有變量),但是使用模板字符串導入時不能夠只使用變量??!必須指定一個目錄,不能全用變量代替!
// 字符串拼接方式 component: import('@/view'+'/sys/user') // 模板字符串方式,webpack4+版本需使用require方式,注意,`@${item.curl}`,是不行的!必須指定一個目錄,不能全用變量代替 component: (resolve) => require([`@/view${item.curl}`], resolve),
這個現象其實是與webpack import()的實現高度相關的。由于webpack需要將所有import()的模塊都進行單獨打包,所以在工程打包階段,webpack會進行依賴收集。
此時,webpack會找到所有import()的調用,將傳入的參數處理成一個正則,如:
import('./app'+path+'/util') => /^\.\/app.*\/util$/
也就是說,import參數中的所有變量,都會被替換為【.*】,而webpack就根據這個正則,查找所有符合條件的包,將其作為package進行打包。
所以動態導入的正確姿勢,應該是盡可能靜態化表達包所處的路徑,最小化變量控制的區域。
3.有了處理動態路由數據的函數,那就需要在合適的地方調用,以發揮作用。這時就需要用到beforeEach了,在router/permission.js文件,配置導航守衛,可以在每次路由跳轉前做一些操作,這里就是獲取動態路由了
import router from '@/router/index' import 'element-ui/lib/theme-chalk/index.css' import '@fortawesome/fontawesome-free/css/all.min.css' import NProgress from 'nprogress' import 'nprogress/nprogress.css' import {fnAddDynamicMenuRoutes} from '@/router/getAsyncRouter' import {getRouter} from '@/api/sys/Menu' import store from '@/store' NProgress.configure({ easing: 'ease', // 動畫方式 speed: 500, // 遞增進度條的速度 showSpinner: false, // 是否顯示加載ico trickleSpeed: 200, // 自動遞增間隔 minimum: 0.3 // 初始化時的最小百分比 }) // 白名單 const whiteList = ['/login'] // no redirect whitelist // 導航守衛 router.beforeEach((to, from, next) => { NProgress.start() try { // 判斷是否已經獲取過動態菜單,未獲取,則需要獲取一次 if (store.getters.dynamicRoutes.length === 0) { if (whiteList.indexOf(to.path) !== -1) { next() } else { getRouter().then(res => { if (res.code === 0) { let menuRouter = fnAddDynamicMenuRoutes(res.data[0].children) store.dispatch('app/dynamicRoutes', menuRouter).then(() => { router.addRoutes(store.getters.dynamicRoutes) next({...to, replace: true}) }) } else { console.log('獲取動態路由失敗!') next({path: '/login'}) } }) } } else { // 路由已存在或已緩存路由 if (to.meta.requireAuth) { if (sessionStorage.getItem('loginName') !== null) { // 判斷本地是否存在token next() } else { // 未登錄,跳轉到登陸頁面 next({path: '/login'}) } } else { if (whiteList.indexOf(to.path) !== -1) { next() } else { if (sessionStorage.getItem('loginName') !== null) { // 判斷本地是否存在token next(`/?redirect=${to.path}`) } else { next(`/login?redirect=${to.path}`) } } } } } catch (error) { console.log('出錯了') next(`/login?redirect=${to.path}`) } }) router.afterEach(() => { // 在即將進入新的頁面組件前,關閉掉進度條 NProgress.done() })
注釋寫的比較詳細了,主要說下思路:
首先確定獲取動態菜單數據的時機。一般在登錄成功跳轉到主頁面時,獲取動態菜單數據。
由于涉及到路由的跳轉(登錄頁面 -> 主頁面),所以可以使用 beforeEach 進行路由導航守衛操作?!?nbsp;
但由于每次路由跳轉均會觸發 beforeEach ,所以為了防止頻繁獲取動態路由值,這里采用vuex方式存儲了獲取的路由信息,如果已獲取路由,就直接跳轉,否則就獲取一次動態菜單數據并處理。
如果不采用vuex方式也可以存到sessionStorage里面,總之就是保存一下獲取的路由信息,以免重復獲取。
4接下來看一看,store的寫法
const state = { dynamicRoutes: [] } const mutations = { DYNAMIC_ROUTES (state, routes) { state.dynamicRoutes = routes } } const actions = { dynamicRoutes ({commit}, routes) { commit('DYNAMIC_ROUTES', routes) } }
注意:vue是單頁面應用程序,所以頁面一刷新數據部分?jǐn)?shù)據也會跟著丟失,所以我們需要將store中的數據存儲到本地,才能保證路由不丟失。
到這里,動態路由就已經配置好了,總體來說不是很難,主要是有坑!但只要理清了思路,寫起代碼就會很清晰。
1.首先是component動態導入的問題,由于webpack的版本不同,需要根據情況來采用import和require方式來導入,如果導入不正確多半會報錯,找不到module等等?;蛘卟粓箦e,但路由跳轉是空白頁。如果導入正確則一定可以跳轉正常,否則,請查找正確的導入方法!路由跳轉正確,能顯示跳轉的組件,就完成了一大半!
2.路由的跳轉的地方,由于我們項目采用的是左側菜單欄,有二級菜單,所以當路由跳轉正常時,還需確定路由跳轉所渲染的位置是否正確!
在刷新頁面時遇到一個問題,動態路由表會隨著vuex的刷新而消失。
處理:這里在app.vue頁面刷新時利用sessionStorage存儲一下store,防止刷新丟失vuex。
如下:
export default { name: 'App', created () { // 在頁面加載時讀取sessionStorage里的狀態信息 if (sessionStorage.getItem('storeData')) { this.$store.replaceState(Object.assign({}, this.$store.state, JSON.parse(sessionStorage.getItem('storeData')))) } // 在頁面刷新時將vuex里的信息保存到sessionStorage里 window.addEventListener('beforeunload', () => { sessionStorage.setItem('storeData', JSON.stringify(this.$store.state)) }) // 兼容iphone手機 window.addEventListener('pagehide', () => { sessionStorage.setItem('storeData', JSON.stringify(this.$store.state)) }) } }
另外,在登錄成功后也獲取了一下動態路由。這樣處理下來,刷新時也不會丟失路由了!
// 獲取動態路由 getRouter().then(res => { if (res.code === 0) { let menuRouter = fnAddDynamicMenuRoutes(res.data[0].children) store.dispatch('app/dynamicRoutes', menuRouter).then(() => { router.addRoutes(store.getters.dynamicRoutes) }) console.log(store.getters.dynamicRoutes) } else { console.log('獲取動態路由失敗!') router.push('/login') } })
以上就是“vue怎么一步到位實現動態路由”這篇文章的所有內容,感謝各位的閱讀!相信大家閱讀完這篇文章都有很大的收獲,小編每天都會為大家更新不同的知識,如果還想學習更多的知識,請關注億速云行業資訊頻道。
免責聲明:本站發布的內容(圖片、視頻和文字)以原創、轉載和分享為主,文章觀點不代表本網站立場,如果涉及侵權請聯系站長郵箱:is@yisu.com進行舉報,并提供相關證據,一經查實,將立刻刪除涉嫌侵權內容。