溫馨提示×
您好，登錄后才能下訂單哦！
點擊 登錄注冊 即表示同意《億速云用戶服務條款》
您好，登錄后才能下訂單哦！
這篇文章主要講解了“docker怎么實現redis集群搭建”，文中的講解內容簡單清晰，易于學習與理解，下面請大家跟著小編的思路慢慢深入，一起來研究和學習“docker怎么實現redis集群搭建”吧！
一、創建redis docker基礎鏡像
二、制作redis節點鏡像
三、運行redis集群
摘要：接觸docker以來，似乎養成了一種習慣，安裝什么應用軟件都想往docker方向做，今天就想來嘗試下使用docker搭建redis集群。
首先，我們需要理論知識：Redis Cluster是Redis的分布式解決方案，它解決了redis單機中心化的問題，分布式數據庫——首要解決把整個數據集按照分區規則映射到多個節點的問題。
這邊就需要知道分區規則——哈希分區規則。Redis Cluster 采用哈希分區規則中的虛擬槽分區。所有的鍵根據哈希函數映射到0 ～ 16383，計算公式：slot = CRC16(key)&16383。每一個節點負責維護一部分槽以及槽所映射的鍵值數據。
下載redis安裝包，使用版本為：4.0.1
[root@etcd1 tmp]# mkdir docker_redis_cluster [root@etcd1 tmp]# cd docker_redis_cluster/ [root@etcd2 docker_redis_cluster]# wget http://download.redis.io/releases/redis-4.0.1.tar.gz
解壓編譯redis
[root@etcd1 docker_redis_cluster]# tar zxvf redis-4.0.1.tar.gz [root@etcd1 docker_redis_cluster]# cd redis-4.0.1/ [root@etcd1 redis-4.0.1]# make
修改redis配置
[root@etcd3 redis-4.0.1]# vi /tmp/docker_redis_cluster/redis-4.0.1/redis.conf
修改bind ip地址
# ~~~ WARNING ~~~ If the computer running Redis is directly exposed to the # internet, binding to all the interfaces is dangerous and will expose the # instance to everybody on the internet. So by default we uncomment the # following bind directive, that will force Redis to listen only into # the IPv4 lookback interface address (this means Redis will be able to # accept connections only from clients running into the same computer it # is running). # # IF YOU ARE SURE YOU WANT YOUR INSTANCE TO LISTEN TO ALL THE INTERFACES # JUST COMMENT THE FOLLOWING LINE. # ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ #bind 127.0.0.1 bind 0.0.0.0
將守護進程yes改成no
# By default Redis does not run as a daemon. Use 'yes' if you need it. # Note that Redis will write a pid file in /var/run/redis.pid when daemonized. daemonize no
將密碼項注釋去掉，添加新密碼
# Warning: since Redis is pretty fast an outside user can try up to # 150k passwords per second against a good box. This means that you should # use a very strong password otherwise it will be very easy to break. # # requirepass foobared
修改為
# Warning: since Redis is pretty fast an outside user can try up to # 150k passwords per second against a good box. This means that you should # use a very strong password otherwise it will be very easy to break. # requirepass 123456
因為配置了密碼，所以，配置中另外一處主從連接也需要配置密碼
# If the master is password protected (using the "requirepass" configuration # directive below) it is possible to tell the slave to authenticate before # starting the replication synchronization process, otherwise the master will # refuse the slave request. # # masterauth <master-password>
修改為
# If the master is password protected (using the "requirepass" configuration # directive below) it is possible to tell the slave to authenticate before # starting the replication synchronization process, otherwise the master will # refuse the slave request. # # masterauth <master-password> masterauth 123456
設置日志路徑
# Specify the log file name. Also the empty string can be used to force # Redis to log on the standard output. Note that if you use standard # output for logging but daemonize, logs will be sent to /dev/null logfile "/var/log/redis/redis-server.log"
配置集群相關信息，去掉配置項前面的注釋
# Normal Redis instances can't be part of a Redis Cluster; only nodes that are # started as cluster nodes can. In order to start a Redis instance as a # cluster node enable the cluster support uncommenting the following: # cluster-enabled yes # Every cluster node has a cluster configuration file. This file is not # intended to be edited by hand. It is created and updated by Redis nodes. # Every Redis Cluster node requires a different cluster configuration file. # Make sure that instances running in the same system do not have # overlapping cluster configuration file names. # cluster-config-file nodes-6379.conf # Cluster node timeout is the amount of milliseconds a node must be unreachable # for it to be considered in failure state. # Most other internal time limits are multiple of the node timeout. # cluster-node-timeout 15000
鏡像制作
[root@etcd3 docker_redis_cluster]# cd /tmp/docker_redis_cluster [root@etcd3 docker_redis_cluster]# vi Dockerfile # Redis # Version 4.0.1 FROM Centos:7<br> ENV REDIS_HOME /usr/local<br> ADD redis-4.0.1.tar.gz / # 本地的redis源碼包復制到鏡像的根路徑下，ADD命令會在復制過后自動解包。被復制的對象必須處于Dockerfile同一路徑，且ADD后面必須使用相對路徑 RUN mkdir -p $REDIS_HOME/redis # 創建安裝目錄 ADD redis-4.0.1/redis.conf $REDIS_HOME/redis/ # 將一開始編譯產生并修改后的配置復制到安裝目錄 RUN yum -y update # 更新yum源 RUN yum install -y gcc make # 安裝編譯需要的工具 WORKDIR /redis-4.0.1 RUN make RUN mv /redis-4.0.1/src/redis-server $REDIS_HOME/redis/ # 編譯后，容器中只需要可執行文件redis-server WORKDIR / RUN rm -rf /redis-4.0.1 # 刪除解壓文件 RUN yum remove -y gcc make # 安裝編譯完成之后，可以刪除多余的gcc跟make VOLUME ["/var/log/redis"] # 添加數據卷 EXPOSE 6379 # 暴露6379端口，也可以暴露多個端口，這里不需要如此
PS.當前鏡像非可執行鏡像，所以沒有包含ENTRYPOINT和CMD指令
構建鏡像
# 切換中國源
[root@etcd3 docker_redis_cluster]# vi /etc/docker/daemon.json
{
"registry-mirrors": ["https://registry.docker-cn.com"]
}
# 編譯
[root@etcd3 docker_redis_cluster]# docker build -t hakimdstx/cluster-redis .
...
Complete!
---> 546cb1d34f35
Removing intermediate container 6b6556c5f28d
Step 14/15 : VOLUME /var/log/redis
---> Running in 05a6642e4046
---> e7e2fb8676b2
Removing intermediate container 05a6642e4046
Step 15/15 : EXPOSE 6379
---> Running in 5d7abe1709e2
---> 2d1322475f79
Removing intermediate container 5d7abe1709e2
Successfully built 2d1322475f79鏡像制作完成，制作中間可能會報： Public key for glibc-headers-2.17-222.el7.x86_64.rpm is not installed 錯誤，這時候需要在鏡像配置中添加一句命令：
... RUN rpm --import /etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7 RUN yum -y update # 更新yum源 RUN yum install -y gcc make # 安裝編譯需要的工具
查看鏡像：
[root@etcd3 docker_redis_cluster]# docker images REPOSITORY TAG IMAGE ID CREATED SIZE hakimdstx/cluster-redis 4.0.1 1fca5a08a4c7 14 seconds ago 435 MB centos 7 49f7960eb7e4 2 days ago 200 MB
以上，redis 基礎鏡像就制作完成了
基于此前制作的redis基礎鏡像創建一個redis節點鏡像
[root@etcd3 tmp]# mkdir docker_redis_nodes [root@etcd3 tmp]# cd docker_redis_nodes [root@etcd3 docker_redis_nodes]# vi Dockerfile # Redis Node # Version 4.0.1<br> FROM hakimdstx/cluster-redis:4.0.1 # MAINTAINER_INFO MAINTAINER hakim 1194842583@qq.com ENTRYPOINT ["/usr/local/redis/redis-server", "/usr/local/redis/redis.conf"]
構建redis節點鏡像
[root@etcd3 docker_redis_nodes]# docker build -t hakimdstx/nodes-redis:4.0.1 . Sending build context to Docker daemon 2.048 kB Step 1/3 : FROM hakimdstx/cluster-redis:4.0.1 ---> 1fca5a08a4c7 Step 2/3 : MAINTAINER hakim 1194842583@qq.com ---> Running in cc6e07eb2c36 ---> 55769d3bfacb Removing intermediate container cc6e07eb2c36 Step 3/3 : ENTRYPOINT /usr/local/redis/redis-server /usr/local/redis/redis.conf ---> Running in f5dedf88f6f6 ---> da64da483559 Removing intermediate container f5dedf88f6f6 Successfully built da64da483559
查看鏡像
[root@etcd3 docker_redis_nodes]# docker images REPOSITORY TAG IMAGE ID CREATED SIZE hakimdstx/nodes-redis 4.0.1 da64da483559 51 seconds ago 435 MB hakimdstx/cluster-redis 4.0.1 1fca5a08a4c7 9 minutes ago 435 MB centos 7 49f7960eb7e4 2 days ago 200 MB
運行redis容器
[root@etcd3 docker_redis_nodes]# docker run -d --name redis-6379 -p 6379:6379 hakimdstx/nodes-redis:4.0.1 1673a7d859ea83257d5bf14d82ebf717fb31405c185ce96a05f597d8f855aa7d [root@etcd3 docker_redis_nodes]# docker run -d --name redis-6380 -p 6380:6379 hakimdstx/nodes-redis:4.0.1 df6ebce6f12a6f3620d5a29adcfbfa7024e906c3af48f21fa7e1fa524a361362 [root@etcd3 docker_redis_nodes]# docker run -d --name redis-6381 -p 6381:6379 hakimdstx/nodes-redis:4.0.1 396e174a1d9235228b3c5f0266785a12fb1ea49efc7ac755c9e7590e17aa1a79 [root@etcd3 docker_redis_nodes]# docker run -d --name redis-6382 -p 6382:6379 hakimdstx/nodes-redis:4.0.1 d9a71dd3f969094205ffa7596c4a04255575cdd3acca2d47fe8ef7171a3be528 [root@etcd3 docker_redis_nodes]# docker run -d --name redis-6383 -p 6383:6379 hakimdstx/nodes-redis:4.0.1 73e4f843d8cb28595456e21b04f97d18ce1cdf8dc56d1150844ba258a3781933 [root@etcd3 docker_redis_nodes]# docker run -d --name redis-6384 -p 6384:6379 hakimdstx/nodes-redis:4.0.1 10c62aafa4dac47220daf5bf3cec84406f086d5261599b54ec6c56bb7da97d6d
查看容器信息
[root@etcd3 redis]# docker ps CONTAINER ID IMAGE COMMAND CREATED STATUS PORTS NAMES 10c62aafa4da hakimdstx/nodes-redis:4.0.1 "/usr/local/redis/..." 3 seconds ago Up 2 seconds 0.0.0.0:6384->6379/tcp redis-6384 73e4f843d8cb hakimdstx/nodes-redis:4.0.1 "/usr/local/redis/..." 12 seconds ago Up 10 seconds 0.0.0.0:6383->6379/tcp redis-6383 d9a71dd3f969 hakimdstx/nodes-redis:4.0.1 "/usr/local/redis/..." 20 seconds ago Up 18 seconds 0.0.0.0:6382->6379/tcp redis-6382 396e174a1d92 hakimdstx/nodes-redis:4.0.1 "/usr/local/redis/..." 3 days ago Up 3 days 0.0.0.0:6381->6379/tcp redis-6381 df6ebce6f12a hakimdstx/nodes-redis:4.0.1 "/usr/local/redis/..." 3 days ago Up 3 days 0.0.0.0:6380->6379/tcp redis-6380 1673a7d859ea hakimdstx/nodes-redis:4.0.1 "/usr/local/redis/..." 3 days ago Up 3 days 0.0.0.0:6379->6379/tcp redis-6379
運行 redis 集群容器
通過遠程連接，查看redis info replication 信息
[root@etcd2 ~]# redis-cli -h 192.168.10.52 -p 6379 192.168.10.52:6379> info replication NOAUTH Authentication required. 192.168.10.52:6379> auth 123456 OK 192.168.10.52:6379> info replication # Replication role:master connected_slaves:0 master_replid:2f0a7b50aed699fa50a79f3f7f9751a070c50ee9 master_replid2:0000000000000000000000000000000000000000 master_repl_offset:0 second_repl_offset:-1 repl_backlog_active:0 repl_backlog_size:1048576 repl_backlog_first_byte_offset:0 repl_backlog_histlen:0 192.168.10.52:6379> # 其余基本信息同上
可以看到，客戶連接之后，因為之前設置了密碼，所以需要先輸入密碼認證，否則就無法通過。以上信息，我們知道所有的redis都是master角色 role:master ，這顯然不是我們所希望的。
在配置之前我們需要查看所有容器當前的IP地址
[root@etcd3 redis]# docker ps CONTAINER ID IMAGE COMMAND CREATED STATUS PORTS NAMES 10c62aafa4da hakimdstx/nodes-redis:4.0.1 "/usr/local/redis/..." 3 seconds ago Up 2 seconds 0.0.0.0:6384->6379/tcp redis-6384 73e4f843d8cb hakimdstx/nodes-redis:4.0.1 "/usr/local/redis/..." 12 seconds ago Up 10 seconds 0.0.0.0:6383->6379/tcp redis-6383 d9a71dd3f969 hakimdstx/nodes-redis:4.0.1 "/usr/local/redis/..." 20 seconds ago Up 18 seconds 0.0.0.0:6382->6379/tcp redis-6382 396e174a1d92 hakimdstx/nodes-redis:4.0.1 "/usr/local/redis/..." 3 days ago Up 3 days 0.0.0.0:6381->6379/tcp redis-6381 df6ebce6f12a hakimdstx/nodes-redis:4.0.1 "/usr/local/redis/..." 3 days ago Up 3 days 0.0.0.0:6380->6379/tcp redis-6380 1673a7d859ea hakimdstx/nodes-redis:4.0.1 "/usr/local/redis/..." 3 days ago Up 3 days 0.0.0.0:6379->6379/tcp redis-6379 [root@etcd3 redis]# [root@etcd3 redis]# docker inspect 10c62aafa4da 73e4f843d8cb d9a71dd3f969 396e174a1d92 df6ebce6f12a 1673a7d859ea | grep IPA "SecondaryIPAddresses": null, "IPAddress": "172.17.0.7", "IPAMConfig": null, "IPAddress": "172.17.0.7", "SecondaryIPAddresses": null, "IPAddress": "172.17.0.6", "IPAMConfig": null, "IPAddress": "172.17.0.6", "SecondaryIPAddresses": null, "IPAddress": "172.17.0.5", "IPAMConfig": null, "IPAddress": "172.17.0.5", "SecondaryIPAddresses": null, "IPAddress": "172.17.0.4", "IPAMConfig": null, "IPAddress": "172.17.0.4", "SecondaryIPAddresses": null, "IPAddress": "172.17.0.3", "IPAMConfig": null, "IPAddress": "172.17.0.3", "SecondaryIPAddresses": null, "IPAddress": "172.17.0.2", "IPAMConfig": null, "IPAddress": "172.17.0.2",
可以知道： redis-6379：172.17.0.2，redis-6380：172.17.0.3，redis-6381：172.17.0.4，redis-6382：172.17.0.5，redis-6383：172.17.0.6，redis-6384：172.17.0.7
配置redis
ert
Redis Cluster 的集群感知操作
//集群(cluster) CLUSTER INFO 打印集群的信息 CLUSTER NODES 列出集群當前已知的所有節點（node），以及這些節點的相關信息。 //節點(node) CLUSTER MEET <ip> <port> 將 ip 和 port 所指定的節點添加到集群當中，讓它成為集群的一份子。 CLUSTER FORGET <node_id> 從集群中移除 node_id 指定的節點。 CLUSTER REPLICATE <node_id> 將當前節點設置為 node_id 指定的節點的從節點。 CLUSTER SAVECONFIG 將節點的配置文件保存到硬盤里面。 //槽(slot) CLUSTER ADDSLOTS <slot> [slot ...] 將一個或多個槽（slot）指派（assign）給當前節點。 CLUSTER DELSLOTS <slot> [slot ...] 移除一個或多個槽對當前節點的指派。 CLUSTER FLUSHSLOTS 移除指派給當前節點的所有槽，讓當前節點變成一個沒有指派任何槽的節點。 CLUSTER SETSLOT <slot> NODE <node_id> 將槽 slot 指派給 node_id 指定的節點，如果槽已經指派給另一個節點，那么先讓另一個節點刪除該槽>，然后再進行指派。 CLUSTER SETSLOT <slot> MIGRATING <node_id> 將本節點的槽 slot 遷移到 node_id 指定的節點中。 CLUSTER SETSLOT <slot> IMPORTING <node_id> 從 node_id 指定的節點中導入槽 slot 到本節點。 CLUSTER SETSLOT <slot> STABLE 取消對槽 slot 的導入（import）或者遷移（migrate）。 //鍵 (key) CLUSTER KEYSLOT <key> 計算鍵 key 應該被放置在哪個槽上。 CLUSTER COUNTKEYSINSLOT <slot> 返回槽 slot 目前包含的鍵值對數量。 CLUSTER GETKEYSINSLOT <slot> <count> 返回 count 個 slot 槽中的鍵。
redis 集群感知：節點握手——是指一批運行在集群模式的節點通過Gossip協議彼此通信，達到感知對方的過程。
192.168.10.52:6379> CLUSTER MEET 172.17.0.3 6379 OK 192.168.10.52:6379> CLUSTER MEET 172.17.0.4 6379 OK 192.168.10.52:6379> CLUSTER MEET 172.17.0.5 6379 OK 192.168.10.52:6379> CLUSTER MEET 172.17.0.6 6379 OK 192.168.10.52:6379> CLUSTER MEET 172.17.0.7 6379 OK 192.168.10.52:6379> CLUSTER NODES 54cb5c2eb8e5f5aed2d2f7843f75a9284ef6785c 172.17.0.3:6379@16379 master - 0 1528697195600 1 connected f45f9109f2297a83b1ac36f9e1db5e70bbc174ab 172.17.0.4:6379@16379 master - 0 1528697195600 0 connected ae86224a3bc29c4854719c83979cb7506f37787a 172.17.0.7:6379@16379 master - 0 1528697195600 5 connected 98aebcfe42d8aaa8a3375e4a16707107dc9da683 172.17.0.6:6379@16379 master - 0 1528697194000 4 connected 0bbdc4176884ef0e3bb9b2e7d03d91b0e7e11f44 172.17.0.5:6379@16379 master - 0 1528697194995 3 connected 760e4d0039c5ac13d04aa4791c9e6dc28544d7c7 172.17.0.2:6379@16379 myself,master - 0 1528697195000 2 connected
當前已經使這六個節點組成集群，但是現在還無法工作，因為集群節點還沒有分配槽（slot）。
分配槽信息
查看172.17.0.2:6379 的槽個數
192.168.10.52:6379> CLUSTER INFO cluster_state:fail cluster_slots_assigned:0 # 被分配槽的個數為0 cluster_slots_ok:0 cluster_slots_pfail:0 cluster_slots_fail:0 cluster_known_nodes:6 cluster_size:0 cluster_current_epoch:5 cluster_my_epoch:2 cluster_stats_messages_ping_sent:260418 cluster_stats_messages_pong_sent:260087 cluster_stats_messages_meet_sent:10 cluster_stats_messages_sent:520515 cluster_stats_messages_ping_received:260086 cluster_stats_messages_pong_received:260328 cluster_stats_messages_meet_received:1 cluster_stats_messages_received:520415
上面看到集群狀態是失敗的，原因是槽位沒有分配，而且需要一次性把16384個槽位完全分配了，集群才可用。
分配槽位
分配槽位： CLUSTER ADDSLOTS 槽位，一個槽位只能分配一個節點，16384個槽位必須分配完，不同節點不能沖突。
所以通過腳本進行分配 addslots.sh：
#!/bin/bash # node1 192.168.10.52 172.17.0.2 n=0 for ((i=n;i<=5461;i++)) do /usr/local/bin/redis-cli -h 192.168.10.52 -p 6379 -a 123456 CLUSTER ADDSLOTS $i done # node2 192.168.10.52 172.17.0.3 n=5462 for ((i=n;i<=10922;i++)) do /usr/local/bin/redis-cli -h 192.168.10.52 -p 6380 -a 123456 CLUSTER ADDSLOTS $i done # node3 192.168.10.52 172.17.0.4 n=10923 for ((i=n;i<=16383;i++)) do /usr/local/bin/redis-cli -h 192.168.10.52 -p 6381 -a 123456 CLUSTER ADDSLOTS $i done
其中， -a 123456 表示需要輸入的密碼。
192.168.10.52:6379> CLUSTER INFO cluster_state:fail # 集群狀態為失敗 cluster_slots_assigned:16101 # 沒有完全分配結束 cluster_slots_ok:16101 cluster_slots_pfail:0 cluster_slots_fail:0 cluster_known_nodes:6 cluster_size:3 cluster_current_epoch:5 cluster_my_epoch:2 cluster_stats_messages_ping_sent:266756 cluster_stats_messages_pong_sent:266528 cluster_stats_messages_meet_sent:10 cluster_stats_messages_sent:533294 cluster_stats_messages_ping_received:266527 cluster_stats_messages_pong_received:266666 cluster_stats_messages_meet_received:1 cluster_stats_messages_received:533194<br> 192.168.10.52:6379> CLUSTER INFO cluster_state:ok # 集群狀態為成功 cluster_slots_assigned:16384 # 已經全部分配完成 cluster_slots_ok:16384 cluster_slots_pfail:0 cluster_slots_fail:0 cluster_known_nodes:6 cluster_size:3 cluster_current_epoch:5 cluster_my_epoch:2 cluster_stats_messages_ping_sent:266757 cluster_stats_messages_pong_sent:266531 cluster_stats_messages_meet_sent:10 cluster_stats_messages_sent:533298 cluster_stats_messages_ping_received:266530 cluster_stats_messages_pong_received:266667 cluster_stats_messages_meet_received:1 cluster_stats_messages_received:533198
綜上可知，當全部槽位分配完成之后，集群還是可行的，如果我們手欠，移除一個槽位，那么集群就立馬那不行了，自己去試試吧 ——CLUSTER DELSLOTS 0 。
如何變成高可用性
以上我們已經搭建了一套完整的可運行的redis cluster，但是每個節點都是單點，這樣子可能出現，一個節點掛掉，整個集群因為槽位分配不完全而崩潰，因此，我們需要為每個節點配置副本備用節點。
前面我們已經提前創建了6個備用節點，搭建集群花了三個，因此還有剩下三個直接可以用來做備用副本。
192.168.10.52:6379> CLUSTER INFO cluster_state:ok cluster_slots_assigned:16384 cluster_slots_ok:16384 cluster_slots_pfail:0 cluster_slots_fail:0 cluster_known_nodes:6 # 總共6個節點 cluster_size:3 # 集群為 3 個節點 cluster_current_epoch:5 cluster_my_epoch:2 cluster_stats_messages_ping_sent:270127 cluster_stats_messages_pong_sent:269893 cluster_stats_messages_meet_sent:10 cluster_stats_messages_sent:540030 cluster_stats_messages_ping_received:269892 cluster_stats_messages_pong_received:270037 cluster_stats_messages_meet_received:1 cluster_stats_messages_received:539930
查看所有節點的id
192.168.10.52:6379> CLUSTER NODES 54cb5c2eb8e5f5aed2d2f7843f75a9284ef6785c 172.17.0.3:6379@16379 master - 0 1528704114535 1 connected 5462-10922 f45f9109f2297a83b1ac36f9e1db5e70bbc174ab 172.17.0.4:6379@16379 master - 0 1528704114000 0 connected 10923-16383 ae86224a3bc29c4854719c83979cb7506f37787a 172.17.0.7:6379@16379 master - 0 1528704114023 5 connected 98aebcfe42d8aaa8a3375e4a16707107dc9da683 172.17.0.6:6379@16379 master - 0 1528704115544 4 connected 0bbdc4176884ef0e3bb9b2e7d03d91b0e7e11f44 172.17.0.5:6379@16379 master - 0 1528704114836 3 connected 760e4d0039c5ac13d04aa4791c9e6dc28544d7c7 172.17.0.2:6379@16379 myself,master - 0 1528704115000 2 connected 0-5461
編寫腳本，添加副本節點
[root@etcd2 tmp]# vi addSlaveNodes.sh #!/bin/bash /usr/local/bin/redis-cli -h 192.168.10.52 -p 6382 -a 123456 CLUSTER REPLICATE 760e4d0039c5ac13d04aa4791c9e6dc28544d7c7 /usr/local/bin/redis-cli -h 192.168.10.52 -p 6383 -a 123456 CLUSTER REPLICATE 54cb5c2eb8e5f5aed2d2f7843f75a9284ef6785c /usr/local/bin/redis-cli -h 192.168.10.52 -p 6384 -a 123456 CLUSTER REPLICATE f45f9109f2297a83b1ac36f9e1db5e70bbc174ab
注意：1、作為備用的節點，必須是未分配槽位的，否者會操作失敗 (error) ERR To set a master the node must be empty and without assigned slots 。
2、需要從需要添加的節點上面執行操作，CLUSTER REPLICATE [node_id] ，使當前節點成為 node_id 的副本節點。
3、添加從節點（集群復制）： 復制的原理和單機的Redis復制原理一樣，區別是：集群下的從節點也需要運行在cluster模式下，要先添加到集群里面，再做復制。
查看所有節點信息：
192.168.10.52:6379> CLUSTER NODES 54cb5c2eb8e5f5aed2d2f7843f75a9284ef6785c 172.17.0.3:6379@16379 master - 0 1528705604149 1 connected 5462-10922 f45f9109f2297a83b1ac36f9e1db5e70bbc174ab 172.17.0.4:6379@16379 master - 0 1528705603545 0 connected 10923-16383 ae86224a3bc29c4854719c83979cb7506f37787a 172.17.0.7:6379@16379 slave f45f9109f2297a83b1ac36f9e1db5e70bbc174ab 0 1528705603144 5 connected 98aebcfe42d8aaa8a3375e4a16707107dc9da683 172.17.0.6:6379@16379 slave 54cb5c2eb8e5f5aed2d2f7843f75a9284ef6785c 0 1528705603000 4 connected 0bbdc4176884ef0e3bb9b2e7d03d91b0e7e11f44 172.17.0.5:6379@16379 slave 760e4d0039c5ac13d04aa4791c9e6dc28544d7c7 0 1528705603000 3 connected 760e4d0039c5ac13d04aa4791c9e6dc28544d7c7 172.17.0.2:6379@16379 myself,master - 0 1528705602000 2 connected 0-5461
可以看到我們現在實現了三主三從的一個高可用集群。
高可用測試——故障轉移
查看當前運行狀態：
192.168.10.52:6379> CLUSTER NODES 54cb5c2eb8e5f5aed2d2f7843f75a9284ef6785c 172.17.0.3:6379@16379 master - 0 1528705604149 1 connected 5462-10922 f45f9109f2297a83b1ac36f9e1db5e70bbc174ab 172.17.0.4:6379@16379 master - 0 1528705603545 0 connected 10923-16383 ae86224a3bc29c4854719c83979cb7506f37787a 172.17.0.7:6379@16379 slave f45f9109f2297a83b1ac36f9e1db5e70bbc174ab 0 1528705603144 5 connected 98aebcfe42d8aaa8a3375e4a16707107dc9da683 172.17.0.6:6379@16379 slave 54cb5c2eb8e5f5aed2d2f7843f75a9284ef6785c 0 1528705603000 4 connected 0bbdc4176884ef0e3bb9b2e7d03d91b0e7e11f44 172.17.0.5:6379@16379 slave 760e4d0039c5ac13d04aa4791c9e6dc28544d7c7 0 1528705603000 3 connected 760e4d0039c5ac13d04aa4791c9e6dc28544d7c7 172.17.0.2:6379@16379 myself,master - 0 1528705602000 2 connected 0-5461
以上，運行正常
嘗試關閉一個master，選擇端口為6380的容器，停掉之后：
192.168.10.52:6379> CLUSTER NODES 54cb5c2eb8e5f5aed2d2f7843f75a9284ef6785c 172.17.0.3:6379@16379 master,fail - 1528706408935 1528706408000 1 connected 5462-10922 f45f9109f2297a83b1ac36f9e1db5e70bbc174ab 172.17.0.4:6379@16379 master - 0 1528706463000 0 connected 10923-16383 ae86224a3bc29c4854719c83979cb7506f37787a 172.17.0.7:6379@16379 slave f45f9109f2297a83b1ac36f9e1db5e70bbc174ab 0 1528706462980 5 connected 98aebcfe42d8aaa8a3375e4a16707107dc9da683 172.17.0.6:6379@16379 slave 54cb5c2eb8e5f5aed2d2f7843f75a9284ef6785c 0 1528706463000 4 connected 0bbdc4176884ef0e3bb9b2e7d03d91b0e7e11f44 172.17.0.5:6379@16379 slave 760e4d0039c5ac13d04aa4791c9e6dc28544d7c7 0 1528706463985 3 connected 760e4d0039c5ac13d04aa4791c9e6dc28544d7c7 172.17.0.2:6379@16379 myself,master - 0 1528706462000 2 connected 0-5461 192.168.10.52:6379> 192.168.10.52:6379> CLUSTER INFO cluster_state:fail cluster_slots_assigned:16384 cluster_slots_ok:10923 cluster_slots_pfail:0 cluster_slots_fail:5461 cluster_known_nodes:6 cluster_size:3 cluster_current_epoch:5 cluster_my_epoch:2 cluster_stats_messages_ping_sent:275112 cluster_stats_messages_pong_sent:274819 cluster_stats_messages_meet_sent:10 cluster_stats_messages_fail_sent:5 cluster_stats_messages_sent:549946 cluster_stats_messages_ping_received:274818 cluster_stats_messages_pong_received:275004 cluster_stats_messages_meet_received:1 cluster_stats_messages_fail_received:1 cluster_stats_messages_received:549824
以上，發現整個集群都失敗了，從節點沒有自動升級為主節點，怎么回事？？
重啟停掉的容器，經排查日志信息 [root@df6ebce6f12a /]# tail -f /var/log/redis/redis-server.log ：
1:S 11 Jun 09:57:46.712 # Cluster state changed: ok 1:S 11 Jun 09:57:46.718 * (Non critical) Master does not understand REPLCONF listening-port: -NOAUTH Authentication required. 1:S 11 Jun 09:57:46.718 * (Non critical) Master does not understand REPLCONF capa: -NOAUTH Authentication required. 1:S 11 Jun 09:57:46.719 * Partial resynchronization not possible (no cached master) 1:S 11 Jun 09:57:46.719 # Unexpected reply to PSYNC from master: -NOAUTH Authentication required. 1:S 11 Jun 09:57:46.719 * Retrying with SYNC... 1:S 11 Jun 09:57:46.719 # MASTER aborted replication with an error: NOAUTH Authentication required. 1:S 11 Jun 09:57:46.782 * Connecting to MASTER 172.17.0.6:6379 1:S 11 Jun 09:57:46.782 * MASTER <-> SLAVE sync started 1:S 11 Jun 09:57:46.782 * Non blocking connect for SYNC fired the event.
可以看到，主從之間訪問需要auth，之前忘記了配置 redis.conf 中的 # masterauth <master-password> ，所以導致主從之間無法通訊。修改配置之后，自動故障轉移正常。
有時候需要實施人工故障轉移：
登錄6380端口的從節點：6383，執行 CLUSTER FAILOVER 命令：
192.168.10.52:6383> CLUSTER FAILOVER (error) ERR Master is down or failed, please use CLUSTER FAILOVER FORCE
發現因為master已經down了，所以我們需要執行強制轉移
192.168.10.52:6383> CLUSTER FAILOVER FORCE OK
查看當前 cluster node 情況：
192.168.10.52:6383> CLUSTER NODES 0bbdc4176884ef0e3bb9b2e7d03d91b0e7e11f44 172.17.0.5:6379@16379 slave 760e4d0039c5ac13d04aa4791c9e6dc28544d7c7 0 1528707535332 3 connected ae86224a3bc29c4854719c83979cb7506f37787a 172.17.0.7:6379@16379 slave f45f9109f2297a83b1ac36f9e1db5e70bbc174ab 0 1528707534829 5 connected f45f9109f2297a83b1ac36f9e1db5e70bbc174ab 172.17.0.4:6379@16379 master - 0 1528707534527 0 connected 10923-16383 98aebcfe42d8aaa8a3375e4a16707107dc9da683 172.17.0.6:6379@16379 myself,master - 0 1528707535000 6 connected 5462-10922 760e4d0039c5ac13d04aa4791c9e6dc28544d7c7 172.17.0.2:6379@16379 master - 0 1528707535834 2 connected 0-5461 54cb5c2eb8e5f5aed2d2f7843f75a9284ef6785c 172.17.0.3:6379@16379 master,fail - 1528707472833 1528707472000 1 connected
從節點已經升級為master節點。這時候，我們嘗試重啟了，6380節點的redis（其實是重新啟動停掉的容器）：
192.168.10.52:6383> CLUSTER NODES 0bbdc4176884ef0e3bb9b2e7d03d91b0e7e11f44 172.17.0.5:6379@16379 slave 760e4d0039c5ac13d04aa4791c9e6dc28544d7c7 0 1528707556044 3 connected ae86224a3bc29c4854719c83979cb7506f37787a 172.17.0.7:6379@16379 slave f45f9109f2297a83b1ac36f9e1db5e70bbc174ab 0 1528707555000 5 connected f45f9109f2297a83b1ac36f9e1db5e70bbc174ab 172.17.0.4:6379@16379 master - 0 1528707556000 0 connected 10923-16383 98aebcfe42d8aaa8a3375e4a16707107dc9da683 172.17.0.6:6379@16379 myself,master - 0 1528707556000 6 connected 5462-10922 760e4d0039c5ac13d04aa4791c9e6dc28544d7c7 172.17.0.2:6379@16379 master - 0 1528707556000 2 connected 0-5461 54cb5c2eb8e5f5aed2d2f7843f75a9284ef6785c 172.17.0.3:6379@16379 slave 98aebcfe42d8aaa8a3375e4a16707107dc9da683 0 1528707556547 6 connected
我們發現，6380節點反而變成了 6383節點的從節點。
現在集群應該是完整的了，所以，集群狀態應該已經恢復了，我們查看下：
192.168.10.52:6383> CLUSTER INFO cluster_state:ok cluster_slots_assigned:16384 cluster_slots_ok:16384 cluster_slots_pfail:0 cluster_slots_fail:0 cluster_known_nodes:6 cluster_size:3 cluster_current_epoch:6 cluster_my_epoch:6 cluster_stats_messages_ping_sent:19419 cluster_stats_messages_pong_sent:19443 cluster_stats_messages_meet_sent:1 cluster_stats_messages_auth-req_sent:5 cluster_stats_messages_update_sent:1 cluster_stats_messages_sent:38869 cluster_stats_messages_ping_received:19433 cluster_stats_messages_pong_received:19187 cluster_stats_messages_meet_received:5 cluster_stats_messages_fail_received:4 cluster_stats_messages_auth-ack_received:2 cluster_stats_messages_received:38631
OK，沒有問題。
集群訪問
客戶端在初始化的時候只需要知道一個節點的地址即可，客戶端會先嘗試向這個節點執行命令，比如 get key ，如果key所在的slot剛好在該節點上，則能夠直接執行成功。如果slot不在該節點，則節點會返回MOVED錯誤，同時把該slot對應的節點告訴客戶端，客戶端可以去該節點執行命令
192.168.10.52:6383> get hello (error) MOVED 866 172.17.0.2:6379 192.168.10.52:6379> set number 20004 (error) MOVED 7743 172.17.0.3:6379
另外，redis集群版只使用db0，select命令雖然能夠支持select 0。其他的db都會返回錯誤。
192.168.10.52:6383> select 0 OK 192.168.10.52:6383> select 1 (error) ERR SELECT is not allowed in cluster mode
近期，有網友詢問docker redis集群連接報錯的問題，具體報錯如下：
初步認為是，node節點沒有全部添加進去，添加之后，依然有上述問題。想到是跨主機訪問，應該是路由尋址不了導致的。當初寫上述教程的時候，docker是以默認的網絡模式bridge模式運行的，畢竟當初是以學習整理文檔為主，主要是單機訪問。但是，實際應用化場景中，多是公網跨主機訪問，問題明朗了，想著集群這東西最好還是設置成共享主機公網ip比較好，于是解決如下：
在docker運行時，執行網絡模式為：host。
端口沖突解決，畢竟host模式下，容器會占用宿主機的端口，于是，我們就從配置下手，在宿主機上生成配置redis-60001.conf,redis-60002.conf,redis-60003.conf...，有多少端口建多少個文件，最終運行一個容器，掛載一個配置到容器中用于覆蓋主機中的配置。
最終的運行方式如下：
docker run -d --name redis-6380 --net host -v /tmp/redis.conf:/usr/local/redis/redis.conf hakimdstx/nodes-redis:4.0.1
至此，網絡問題得到解決。
PS.生產環境需要注意防火墻問題，不然也是會報錯的?！ ?/p>
感謝各位的閱讀，以上就是“docker怎么實現redis集群搭建”的內容了，經過本文的學習后，相信大家對docker怎么實現redis集群搭建這一問題有了更深刻的體會，具體使用情況還需要大家實踐驗證。這里是億速云，小編將為大家推送更多相關知識點的文章，歡迎關注！
免責聲明：本站發布的內容（圖片、視頻和文字）以原創、轉載和分享為主，文章觀點不代表本網站立場，如果涉及侵權請聯系站長郵箱：is@yisu.com進行舉報，并提供相關證據，一經查實，將立刻刪除涉嫌侵權內容。
