C++中怎么利用LeetCode讀取N個字符

這期內容當中小編將會給大家?guī)碛嘘P(guān)C++中怎么利用LeetCode讀取N個字符，文章內容豐富且以專業的角度為大家分析和敘述，閱讀完這篇文章希望大家可以有所收獲。

[LeetCode] 158. Read N Characters Given Read4 II - Call multiple times 用Read4來讀取N個字符之二 - 多次調用

Given a file and assume that you can only read the file using a given method read4, implement a method read to read n characters. Your method read may be called multiple times.

Method read4:

The API read4 reads 4 consecutive characters from the file, then writes those characters into the buffer array buf.

The return value is the number of actual characters read.

Note that read4() has its own file pointer, much like FILE *fp in C.

Definition of read4:

    Parameter:  char[] buf
Returns:    int

Note: buf[] is destination not source, the results from read4 will be copied to buf[]

Below is a high level example of how read4 works:

File file("abcdefghijk"); // File is "abcdefghijk", initially file pointer (fp) points to 'a'
char[] buf = new char[4]; // Create buffer with enough space to store characters
read4(buf); // read4 returns 4. Now buf = "abcd", fp points to 'e'
read4(buf); // read4 returns 4. Now buf = "efgh", fp points to 'i'
read4(buf); // read4 returns 3. Now buf = "ijk", fp points to end of file

Method read:

By using the read4 method, implement the method read that reads n characters from the file and store it in the buffer array buf. Consider that you cannot manipulate the file directly.

The return value is the number of actual characters read.

Definition of read:

    Parameters: char[] buf, int n
Returns: int

Note: buf[] is destination not source, you will need to write the results to buf[]

Example 1:

File file("abc");
Solution sol;
// Assume buf is allocated and guaranteed to have enough space for storing all characters from the file.
sol.read(buf, 1); // After calling your read method, buf should contain "a". We read a total of 1 character from the file, so return 1.
sol.read(buf, 2); // Now buf should contain "bc". We read a total of 2 characters from the file, so return 2.
sol.read(buf, 1); // We have reached the end of file, no more characters can be read. So return 0.

Example 2:

File file("abc");
Solution sol;
sol.read(buf, 4); // After calling your read method, buf should contain "abc". We read a total of 3 characters from the file, so return 3.
sol.read(buf, 1); // We have reached the end of file, no more characters can be read. So return 0.

Note:

1. Consider that you cannot manipulate the file directly, the file is only accesible for read4 but not for read.

2. The read function may be called multiple times.

3. Please remember to RESET your class variables declared in Solution, as static/class variables are persisted across multiple test cases. Please see here for more details.

4. You may assume the destination buffer array, buf, is guaranteed to have enough space for storing n characters.

5. It is guaranteed that in a given test case the same buffer buf is called by read.

這道題是之前那道 Read N Characters Given Read4 的拓展，那道題說 read 函數只能調用一次，而這道題說 read 函數可以調用多次，那么難度就增加了，為了更簡單直觀的說明問題，舉個簡單的例子吧，比如：

buf = "ab", [read(1),read(2)]，返回 ["a","b"]

那么第一次調用 read(1) 后，從 buf 中讀出一個字符，就是第一個字符a，然后又調用了一個 read(2)，想取出兩個字符，但是 buf 中只剩一個b了，所以就把取出的結果就是b。再來看一個例子：

buf = "a", [read(0),read(1),read(2)]，返回 ["","a",""]

第一次調用 read(0)，不取任何字符，返回空，第二次調用 read(1)，取一個字符，buf 中只有一個字符，取出為a，然后再調用 read(2)，想取出兩個字符，但是 buf 中沒有字符了，所以取出為空。

但是這道題我不太懂的地方是明明函數返回的是 int 類型啊，為啥 OJ 的 output 都是 vector<char> 類的，然后我就在網上找了下面兩種能通過OJ的解法，大概看了看，也是看的個一知半解，貌似是用兩個變量 readPos 和 writePos 來記錄讀取和寫的位置，i從0到n開始循環，如果此時讀和寫的位置相同，那么調用 read4 函數，將結果賦給 writePos，把 readPos 置零，如果 writePos 為零的話，說明 buf 中沒有東西了，返回當前的坐標i。然后用內置的 buff 變量的 readPos 位置覆蓋輸入字符串 buf 的i位置，如果完成遍歷，返回n，參見代碼如下：

解法一：

// Forward declaration of the read4 API.
int read4(char *buf);

class Solution {
public:
    int read(char *buf, int n) {
        for (int i = 0; i < n; ++i) {
            if (readPos == writePos) {
                writePos = read4(buff);
                readPos = 0;
                if (writePos == 0) return i;
            }
            buf[i] = buff[readPos++];
        }
        return n;
    }
private:
    int readPos = 0, writePos = 0;
    char buff[4];
};

下面這種方法和上面的方法基本相同，稍稍改變了些解法，使得看起來更加簡潔一些：

解法二：

// Forward declaration of the read4 API.
int read4(char *buf);

class Solution {
public:
    int read(char *buf, int n) {
        int i = 0;
        while (i < n && (readPos < writePos || (readPos = 0) < (writePos = read4(buff))))
            buf[i++] = buff[readPos++];
        return i;
    }
    char buff[4];
    int readPos = 0, writePos = 0;
};

上述就是小編為大家分享的C++中怎么利用LeetCode讀取N個字符了，如果剛好有類似的疑惑，不妨參照上述分析進行理解。如果想知道更多相關知識，歡迎關注億速云行業資訊頻道。