ubuntu與centos中怎么更換ip

這篇文章主要講解了“ubuntu與centos中怎么更換ip”，文中的講解內容簡單清晰，易于學習與理解，下面請大家跟著小編的思路慢慢深入，一起來研究和學習“ubuntu與centos中怎么更換ip”吧！

代碼一
ubuntu與centos

代碼如下:

ubuntu:
#!/bin/bash
echo "ipaddr:"
read line
echo $line
sed "s/address.*$/address=${line}/g" /etc/network/interfaces
centos(未測試):
#!/bin/bash
echo "ipaddr:"
read line
echo $line
sed "s/IPADDR.*$/IPADDR=${line}/g" /etc/sysconfig/network-scipts/ifcfg-eth0

代碼二
ubuntu更改IP的shell代碼，自己寫的，比較拙，請指正

代碼如下:

#! /bin/sh

echo "Use gateway at 192.168.0.1 (Y) or 192.168.1.1 (N)
or detail set (O)\nPlease choose Y/N/O"
read OP
if [ "$OP" = Y ] || [ "$OP" = y ] ; then
 GATEWAY=192.168.0.1
 IP=192.168.0.215
elif [ "$OP" = N ] || [ "$OP" = n ] ; then
 GATEWAY=192.168.1.1
 IP=192.168.1.215
else
 echo "Please input the ip:"
 read IP
 echo "Please input the gateway"
 read GATEWAY
fi
echo "auto lo
iface lo inet static

auto eth0
iface eth0 inet static
netmask 255.255.255.0
address $IP
gateway $GATEWAY" > /tmp/interfaces
clear
echo "Init File interfaces Successfully!"
echo "*************************************"
cat /tmp/interfaces
echo "*************************************"
echo "Change the file in /etc/networks/interfaces?(Y/N)"
read OP
if [ "$OP" = Y ] || [ "$OP" = y ] ; then
 echo "Set OK!"
 cp /tmp/interfaces /etc/network/interfaces
 /etc/init.d/networking restart
else
 echo "Give up"
fi
rm /tmp/interfaces
echo "Whether change the DNS(/etc/resolv.conf)(Y/N)"
read OP
if [ "$OP" = Y ] || [ "$OP" = y ];then
 echo "Input the DNS server IP:"
 read IP
 echo "Now change the DNS IP"
 mv /etc/resolv.conf /etc/resolv.conf.bak
 echo "nameserver $IP" >/etc/resolv.conf
 echo "Done!"
fi

感謝各位的閱讀，以上就是“ubuntu與centos中怎么更換ip”的內容了，經過本文的學習后，相信大家對ubuntu與centos中怎么更換ip這一問題有了更深刻的體會，具體使用情況還需要大家實踐驗證。這里是億速云，小編將為大家推送更多相關知識點的文章，歡迎關注！