有哪些實現android自動化測試部署與運行Shell腳本

本篇內容介紹了“有哪些實現android自動化測試部署與運行Shell腳本”的有關知識，在實際案例的操作過程中，不少人都會遇到這樣的困境，接下來就讓小編帶領大家學習一下如何處理這些情況吧！希望大家仔細閱讀，能夠?qū)W有所成！

主流程為：

1.檢測是否指定端口的模擬器已經運行，若有則關閉
2.創建模擬器
3.啟動模擬器
4.用ant build包，通過檢查bin目錄下有沒有apk來確定是否成功
5.檢查指定端口的模擬器是否已正常運行
6.用adb安裝apk
7.啟動apk的activity，讓程序自己跑
8.用shell ps循環檢測程序是否已退出，若已退出，檢查是否sdcard是是否已成功生成報告文件
9.若報告文件不完整，即程序被中止/崩潰，重啟activity
10.檢測是否超時

代碼如下:

#!/bin/bash
# by hursing 2013-10-28
# 指定port，可以不干擾其它正在運行的模擬器。根據sdk文檔，port可以在5554至5584之間，最好是偶數
portNumber=5578
emulatorPID=`ps -ef | grep "emulator" | grep "port $portNumber" | awk '{print $2;}'`
if [ -n "$emulatorPID" ]; then
 echo "close emulator window"
 kill -9 $emulatorPID
fi

# 創建模擬器，force選項能覆蓋已存在的模擬器，即sdcard內容也抹掉。echo no是回答不需要自定義硬件配置
echo "create avd"
emulatorName="Test"
echo no | android create avd --name $emulatorName --force --target android-17 --sdcard 300M --abi armeabi-v7a

# 啟動模擬器，port選項指定tcp端口。&是另起進程執行
echo "start avd"
emulator -avd $emulatorName -port $portNumber &

# 沒有證書簽名，所以是debug
echo "build apk"
android update project -p .
ant debug
if [ $? -ne 0 ]; then
 echo "build failed, try again now..."
 ant clean
 ant debug
 if [ $? -ne 0 ]; then
  echo "can NOT build apk!"
  exit 5
 fi
fi
apkFile=`find ./bin/*.apk | grep -v "unaligned"`
if [ -z "$apkFile" ]; then
 echo "no apk file generated!"
 exit 7
fi

# wait-for-device能block住腳本直到不顯示offline
echo "check emulator ready..."
emulatorSerialNumber="emulator-$portNumber"
ready=`adb devices | grep "$emulatorSerialNumber"`
if [ -z "$ready" ]; then
 echo "emulator can NOT launch."
 exit 3
else
 ready=`adb devices | grep "$emulatorSerialNumber.*offline"`
 if [ -n "$ready" ]; then
  echo "wait-for-device"
  adb -s $emulatorSerialNumber wait-for-device
  sleep 10
 fi
fi

# 當adb可以安裝時，模擬器未必已經初始化完成，還是會失敗的，所以要檢測error，試3遍。
echo "install apk"
let maxTryTimes=3
while [ $maxTryTimes -gt 0 ]; do
 result=`adb -s $emulatorSerialNumber install $apkFile`  # 'ant installd' can NOT specify device
 check=`echo "$result" | grep -o "Error"`
 if [ -z "$check" ]; then
  echo "successfully install apk"
  break;
 else
  echo "$result"
  echo "install failed, try again after sleeping 10 seconds"
  sleep 10
  let maxTryTimes-=1
 fi
done
if [ $maxTryTimes -eq 0 ]; then
 echo "can NOT install apk to emulator."
 exit 4
fi

echo "start MainActivity"
activityName="com.hursing.MainActivity"
packageName=`cat AndroidManifest.xml | grep -o "package=\".*\"" | sed 's/package="//;s/"//'`
adb -s $emulatorSerialNumber shell am start -W -n "$packageName/$activityName"

heartBeat=10
echo "waiting for test finished.check every $heartBeat seconds."
resultFile="/sdcard/result.txt"
successFlag="End at "
sleep $heartBeat
let maxTimeLimit=60*10
while [ $maxTimeLimit -gt 0 ]; do
 running=`adb -s $emulatorSerialNumber shell ps | grep $packageName`
 if [ -n "$running" ]; then
  let maxTimeLimit-=$heartBeat
  echo "waiting, sleep another $heartBeat seconds..."
  sleep $heartBeat
 else
  report=`adb -s $emulatorSerialNumber shell cat "$resultFile"`
  check=`echo "$report" | grep -o "$successFlag"`
  if [ -z "$check" ]; then
   echo "app crash, run activity again..."
   adb -s $emulatorSerialNumber shell am start -W -n "$packageName/$activityName"
  else
   echo "app exit normally"
   break
  fi
 fi
done

echo "close emulator window."
kill -9 `ps -ef | grep "emulator" | grep "port $portNumber" | awk '{print $2;}'`

if [ $maxTimeLimit -eq 0 ]; then
 echo "Test timeout!"
 echo "$report"
 exit 9
else
 echo "Test Finished!"
 echo
 echo "$report"
fi

java代碼里有一點要注意，如果程序崩潰，彈出了"has stopped”對話框，那么ps還是能查到的，要自己調用

代碼如下:

Thread.setDefaultUncaughtExceptionHandler

，在handler里直接System.exit(0)才行。

“有哪些實現android自動化測試部署與運行Shell腳本”的內容就介紹到這里了，感謝大家的閱讀。如果想了解更多行業相關的知識可以關注億速云網站，小編將為大家輸出更多高質量的實用文章！