基于RHEL 6.5安裝Oracle 11g詳細教程（8）——OVF模板制作

8  OVF模板制作

8.1  系統清理和初始化

[root@oracle ~]# cd /temp

[root@oracle temp]# ls

database lost+found

linux.x64_11gR2_database_1of2.zip pdksh-5.2.14-37.el5_8.1.x86_64.rpm

linux.x64_11gR2_database_2of2.zip yum

[root@oracle temp]# rm -rfv database/

[root@oracle temp]# rm -rfv linux.x64_11gR2_database_*

[root@oracle temp]# rm -rfv pdksh-5.2.14-37.el5_8.1.x86_64.rpm

[root@oracle temp]$ exit

logout

[root@oracle ~]# cd /etc/udev/rules.d/

[root@oracle rules.d]# ls

60-fprint-autosuspend.rules 70-persistent-net.rules 98-kexec.rules

60-pcmcia.rules 90-alsa.rules 99-fuse.rules

60-raw.rules 90-hal.rules 99-vmware-scsi-udev.rules

70-persistent-cd.rules 97-bluetooth-serial.rules

[root@oracle rules.d]# vi 70-persistent-net.rules

# This file was automatically generated by the /lib/udev/write_net_rules

# program, run by the persistent-net-generator.rules rules file.

#

# You can modify it, as long as you keep each rule on a single

# line, and change only the value of the NAME= key.

[root@oracle rules.d]# vi 70-persistent-cd.rules

# This file was automatically generated by the /lib/udev/write_cd_rules

# program, run by the cd-aliases-generator.rules rules file.

#

# You can modify it, as long as you keep each rule on a single

# line, and set the $GENERATED variable.

[root@oracle rules.d]#cd /etc/sysconfig/network-scripts/

[root@oracle network-scripts]# vi /etc/sysconfig/network-scripts/ifcfg-eth0

HWADDR= 00:0c:29:81:57:f3

[root@oracle network-scripts]# shutdown -h 0

Broadcast message from root@oracle.kely.com

(/dev/pts/0) at 7:36 ...

The system is going down for halt NOW!

8.2  導出OVF模板

1）如下圖所示，選中Oracle11g虛擬機。

2）如下圖所示，依次選擇文件 -- 導出 -- 導出OVF模板。

3）如下圖所示，輸入名稱（Oracle11g），選擇目錄（E:\VMware vSphere 5.5 Templates），選擇格式（單個文件(OVA)），輸入描述（Oracle 11g R2 x86_64 is installed finish. BUILD20140515），單擊確定。

4）如下圖所示，正在導出Oracle11g…