opatch命令參數解析

發布時間：2020-08-15 15:25:11 來源：ITPUB博客閱讀：364 作者：hadba 欄目：關系型數據庫

[oracle@slient ~]$ opatch
Oracle Interim Patch Installer version 11.2.0.3.4
Copyright (c) 2012, Oracle Corporation. All rights reserved.

Syntax Error... No command specified.

Usage: opatch [ -help ] [ -report ] [ command ]

            command := apply
                       lsinventory
                       lspatches
                       napply
                       nrollback
                       rollback
                       query
                       version
                       prereq
                       util

:= -help       Displays the help message for the command.
                       -report     Print the actions without executing.

example:
   'opatch -help'
   'opatch -help -fmw'
   'opatch auto -help'
   'opatch apply -help'
   'opatch lsinventory -help'
   'opatch lspatches -help'
   'opatch napply -help'
   'opatch nrollback -help'
   'opatch rollback -help'
   'opatch prereq -help'
   'opatch util -help'

OPatch failed with error code 14
[oracle@slient ~]$

[oracle@slient ~]$ opatch auto -help

Usage:
:
: opatch auto -h       # to see this message
:
: This command must be run as root user and needs Opatch version
: 10.2.0.4.7 or above.
: Case 1 - On each node of the CRS cluster in case of Non Shared CRS Home.
: Case 2 - On any one node of the CRS cluster is case of Shared CRS home.
:
:
:PARAMETERS
:
:Patch Location
:              Path to the location for the patch. If the patch
:              location is not specified, then the current directory
:              is taken as the patch location
:OPTIONS
:
: -rollback    The patch will be rolled back, not applied
:
:
: -oh          comma seperated list of Oracle homes to patch
:              The default is all applicable Oracle Homes.
:              use this option to patch RDBMS homes where
:              no database is registered.
:
: -och         Path of Oracle Clusterware home.
:              use this option to patch only clusterware home
:              with stack down.Do not use this option with CRS
:              stack up. This only patches the Clusterware home
:
:
: Suggested mode of operation:
:
:# 1. apply the patch with the unzipped patch location
:     This applies the patch to all applicable homes on the machine
:
: opatch auto <Patch Location>
:
:# 2. Rollback the patch.
:     This rolls back the patch from all the applicable homes on the machine
:
: opatch auto -rollback <Patch Location>
:
:# 3. apply the patch with -oh option
:     This option allows to apply patch on selective list of oracle homes
:
: opatch auto <Patch Location> -oh /ora/oh2,/ora/oh3,/ora/oh4
:
:# 4. apply the patch with -och option
:     This option is used to only patch the CRS home when
:     Clusterware stack is down.
:
: opatch auto <Patch Location> -och /ora/ora_crs_home
:

[oracle@slient ~]$

[oracle@slient ~]$ opatch apply -help
Oracle Interim Patch Installer version 11.2.0.3.4
Copyright (c) 2012, Oracle Corporation. All rights reserved.

DESCRIPTION
    This operation applies an interim patch to an ORACLE_HOME from
    the current directory. The patch location can specified using
    the parameter patch_location.

SYNTAX
opatch apply [-connectString ]
              [-delay ] [ -force ] [ -force_conflict ]
              [-init <parameters for="" the="" init="" script="" in="" escaped="" double
               quotes> [-opatch_init_end] ]
              [-invPtrLoc ]
              [-jre ] [-local ] [-local_node ]
              [-minimize_downtime ] [-no_bug_superset ] [-no_inventory ]
              [-no_relink] [-no_sysmod] [-ocmrf ]
              [-oh ]
              [-post <parameters for="" the="" post="" script="" in="" escaped
               quotes> [-opatch_post_end] ]
              [-pre <parameters for="" the="" pre="" script
               in escaped double quotes> [-opatch_pre_end] ]
              [-profile_mask ]
              [-property_file ]
              [-ptlConnect ]
              [-ptlPassword ]
              [-ptlSchema ]
              [-remote_nodes ]
              [-retry <value ]="" [-runsql="" ]
              [silent ] [-sqlScript ] [-verbose ]
              [ ]

OPTIONS
        -all_nodes
              Apply the patch using all-node mode.

        -connectString
              This option can be used to specify the list of database
              instances on which the patch needs to be applied. The
              value for this option is specified as per the following
              syntax "SID:User:Passwd:Node". The SID is a must, others
              can be ignored, OPatch takes default values for it.
              Ex: oracle:dba:dba:mymachine,oracle1:::
              NOTE: If the system is not part of RAC setup, then to
              patch just the local node, provide the node name as
              empty string.

       -delay
              If -retry is specified, this options tells OPatch how
              many seconds it should wait before attempting to lock
              inventory again in case of a previous failure.

       -force
              This option is meaningful with 'silent' option and is used
              to override the behavior of silent under specific
              circumstances.

       -force_conflict
              If a conflict exist which prevents the patch from being
              applied, the -force_conflict flag can be used to apply the
              patch. OPatch will remove all the conflicting patches before
              applying the current patch. This will override the 'silent'
              behavior for conflicts and hence is meaningful only when used
              with 'silent' option.

       -init
              This option is used to pass parameters to the init
              script. This script is executed before prerequisite checks
              are run. The value for this option have to be enclosed
              in double quotes. This option should be ended by option
              'opatch_init_end'.

       -invPtrLoc
              Used to locate the oraInst.loc file. Needed when the
              installation used the -invPtrLoc flag. This should be
              the path to the oraInst.loc file

       -jre
              This option tells OPatch to use JRE (java) from the
              specified location instead of the default location
              under Oracle Home.

       -local
              Patch the local node, then update inventory of the
              local node. Do not propagate the patch or inventory
              update to other nodes.

       -local_node
              This option can be used to specify to OPatch the local
              node name to be used for RAC mode application of the patch

       -minimize_downtime
              Only applied to RAC instances. User supplies the
              order of nodes to be patched. This option cannot be
              used in conjunction with -local option with a rolling
              patch.

       -no_bug_superset
              This option tells OPatch to error out if the current
              patch's bugs-to-fix is a super-set (or same set) of an
              installed patch's bugs-fixed in the Oracle Home.

       -no_inventory
              This option specifies not to update the inventory, it
              just updates the files in the system.
              If inventory is readable, then OPatch tries to read the
              inventory.

       -no_relink
              The nolink option does not perform any make operations.
              This option can be used during multiple patch
              applications and perform the linking step only once.
              OPatch does not keep track of the make operations it
              did not perform. It is the job of the OPatch users to
              make sure the execute OPatch without this option at
              the end, so that compilation happens once

       -no_sysmod
              This option specifies not to update the files in the
              system. It just updates the inventory. It also will not
              execute the pre and post scripts

       -ocmrf
              Give OPatch the absolute path to the OCM response file
              to be used for OCM configuration. -silent must be used
              in conjunction with -ocmrf if Oracle Home doesn't have
              OCM installed and configured.

       -oh
              The oracle home to work on. This takes precedence over
              the environment variable ORACLE_HOME

       -opatch_init_end
              This option is used to mark the end of init options.
              Without this option everything after init till end of
              the command is passed into init. This option is
              meaningless without -init option.

       -opatch_post_end
              This option is used to mark the end of post options.
              Without this option everything after post till end of
              the command is passed into post. This option is
              meaningless without -post option.

       -opatch_pre_end
              This option is used to mark the end of pre options.
              Without this option everything after pre till end of
              the command is passed into pre. This option is
              meaningless without -pre option.

       -post
              This option is used to pass parameters to the post script.
              This script is executed after application of the patch.
              The value for this option have to be enclosed in double
              quotes. This option should be ended by option
              'opatch_post_end'.

       -pre
              This option is used to pass parameters to the pre
              script. This script is executed before application of
              the patch. The value for this option have to be enclosed
              in double quotes. This option should be ended by option
              'opatch_pre_end'.

       -profile_mask
              If the patch to be applied specifies WLS patch/patchset
              as prerequisites, OPatch will read the WLS default patch
              profile. To have OPatch read non-default patch profile,
              specify the patch profile name with this option.

       -property_file
              The user defined property file for OPatch to use. The
              path to the property file should be absolute. This
              property file takes precedence over the one that is
              supplied with OPatch

       -ptlConnect
              This option can be used to specify the connect string of the
              portal schema

       -ptlPassword
              This option can be used to specify the password of the portal
              schema

       -ptlSchema
              This option can be used to specify the schema of the portal
              repository patch

       -remote_nodes
              This option can be used to specify to OPatch the list
              of remote nodes to be used for RAC mode application of
              the patch. The node names are comma separated and
              without spaces

       -report
              Just prints out the actions without executing

       -retry
              This option tells OPatch how many times it should retry
              in case of an inventory lock failure.

       -runSql
              This option can be used to specify OPatch to run the
              sql scripts and sql procedures if they are present in the
              given patch.

       -silent
              This suppresses any user-interaction

       -sqlScript
              This option can be used to specify the custom sql script
              to be run by OPatch after patching is completed

       -verbose
              This option prints more OPatch output to the screen as
              well as to the log file

PARAMETERS
      Patch Location
              Path to the location for the patch. If the patch
              location is not specified, then the current directory
              is taken as the patch location.

OPatch succeeded.
[oracle@slient ~]$

[oracle@slient ~]$ opatch lsinventory -help
Oracle Interim Patch Installer version 11.2.0.3.4
Copyright (c) 2012, Oracle Corporation. All rights reserved.

DESCRIPTION
    List the inventory for a particular $ORACLE_HOME or display all
    installations that can be found.

SYNTAX
opatch lsinventory [-all ] [-all_nodes] [-bugs_fixed ]
                   [-delay ] [-detail ] [-group_by_date ]
                   [-inactive]
                   [-invPtrLoc ]
                   [-jre ] [-local ]
                   [-oh ] [-patch ]
                   [-patch_id ]
                   [-ptlConnect ]
                   [-ptlPassword ]
                   [-ptlSchema ]
                   [-property_file ]
                   [-retry ] [-translation_patch ]

OPTIONS
       -all
              Report the name and installation directory for each
              $ORACLE_HOME found.

       -all_nodes
              Reports the patches installed on the given Oracle Home
              in all nodes of the RAC system. It also prints the oracle
              binary's size and checksum on all nodes. This option cannot
              be used in conjunction with -all, -detail, -patch.

       -bugs_fixed
              Reports bugs fixed by installed patches in a tabular format.
              Besides the bugs fixed, the report also displays the installed
              patches, installed times, and bug descriptions.
              The fixed bugs are sorted per installed patch. Default display
              is patches in descending order based on installed time and
              ascending order of bugs within each patch. You can use 'asc'
              (or) 'desc' with this option to enforce sort order on bugs
              within each patch.

              You can use this option with the patch (or) patch_id option to
              obtain sort orders with installed patches.

       -delay
              If -retry is specified, this option tells OPatch how
              many seconds it should wait before attempting to lock
              inventory again in case of a previous failure.

       -detail(s)
              Report installed products and other details. This
              option cannot be used in conjunction with all option.

       -group_by_date
              This option tells OPatch to group all installed
              patches by the date they were installed in the
              Oracle Home

       -inactive
              This option lists all the inactive patches that have been
              superseded by other superset patch(es) installed in the
              Oracle Home

       -invPtrLoc
              Used to locate the oraInst.loc file. When the
              installation used the invPtrLoc flag. This should be
              the path to the oraInst.loc file

       -jre
              This option tells OPatch to use JRE (java) from the
              specified location instead of the default location
              under Oracle Home

       -local
              This option tells OPatch to display inventory
              information of the local node only

       -oh
              The oracle home to work on. This takes precedence over
              the environment variable ORACLE_HOME

       -patch
              Lists the patch IDs installed in the Oracle home in ascending
              (asc) or descending (desc) order, which is the default, based on
              installed time.

       -patch_id
              Lists the patch IDs installed in the oracle home
              in ascending (asc) or descending (desc) order based on
              patch numbers. The value defaults to ascending (asc).

       -ptlConnect
              This option is used to specify the connect string credentials
              of the portal schema

       -ptlPassword
              This option is used to specify the password of the portal
              schema

       -ptlSchema
              This option is used to specify the schema of the portal
              repository

       -property_file
              The user defined property file for OPatch to use. The
              path to the property file should be absolute. This
              property file takes precedence over the one that is
              supplied with OPatch

       -retry
              This option tells OPatch how many times it should
              retry in case of an inventory lock failure

       -translation_patch
              Report installed translation patch(es) in a tabular format.
              The report displays translation patch, unique patch identifier,
              language code, installed time of the translation patch and base
              patch for any single row in the table.

PARAMETERS
       This operation does not have any required parameters.

OPatch succeeded.

[oracle@slient ~]$ opatch lspatches -help

DESCRIPTION
    List and verify patch metadata specified by patch ID (installed in
    ORACLE_HOME) or patch location.

SYNTAX
opatch lspatches   [-id ]
                   [-qfile ]
                   [ -bugs ]
                   [ -verify ]
                   [ -required ]
                   [-invPtrLoc ]
                   [-jre ]
                   [-oh ]
                   [ ]

OPTIONS
       -id
              This option specifies the patch number. It must be registered
              in the Oracle Home inventory. It can be any numeric sequence or
              combined with language. Ex. 11111, 11111/zh_CN. It can't support
              multiple patch IDs.

       -qfile
              Specify the relative path to Oracle Home of the file to determine
              the latest patch that touches this file.
              Ex. On Linux: admin/rdbms/catcpu.sql
                  On Windows: admin\rdbms\catcpu.sql
              OPatch can tell which latest patch touches the file catcpu.sql
              in Oracle Home.

       -bugs
              Print bugs info for every patch.

       -verify
              This option would verify if the specified patch ID or patch
              location is registered in Oracle Home inventory or not. Besides,
              it will verify if all patch files are ok in $ORACLE_HOME.
              This option should be accompanied by either option -id
              or .
              Ex. opatch lspatches -id 111 -verify
                  opatch lspatches /scratch/test/111 -verify

       -required
              This option will print key metadata only. This includes the
              following metadata: required components, prereq patches,
              executables to shutdown and support platforms.
              This option should be accompanied by either option -id
              or .

       -invPtrLoc
              Used to locate the oraInst.loc file. When the installation uses
              the invPtrLoc flag, the value should indicate the path to
              oraInst.loc file

       -jre
              This option tells OPatch to use JRE (java) from the
              specified location instead of the default location
              under Oracle Home

       -oh
              The oracle home to work on. This takes precedence over
              the environment variable ORACLE_HOME

[oracle@slient ~]$

[oracle@slient ~]$ opatch napply -help
Oracle Interim Patch Installer version 11.2.0.3.4
Copyright (c) 2012, Oracle Corporation. All rights reserved.

DESCRIPTION
    This operation is used to Apply a set of patches at a time.
    Use -silent to apply the patches in silent mode.

SYNTAX
opatch napply [patch_location] [-id comma-separated list of patch IDs]
                      [ -all_nodes ]
                      [-connectString ]
                      [-delay ] [ -force ] [ -force_conflict ]
                      [-idFile <path of="" the="" file="" that="" has="" list="" patch="" ids="" ]
                      [-init <parameters for="" the="" init="" script="" in="" escaped="" double
                       quotes> [-opatch_init_end] ]
                      [-invPtrLoc ]
                      [-jre ] [ -local ]
                      [ -local_node ]
                      [-minimize_downtime ] [-no_bug_superset ]
                      [-no_inventory ] [-no_relink]
                      [-no_sysmod] [-ocmrf ]
                      [-oh ]
                      [ -phBaseDir <path to="" the="" directory="" that="" contains="" list
                        of patch directories> ]
                      [ -phBaseFile <path to="" the="" file="" containing="" the
                        location of the patches to be applied> ]
                      [-post <parameters for="" the="" post="" script="" in
                       escaped double quotes> [-opatch_post_end] ]
                      [-pre <parameters for="" the="" pre="" script="" in
                       escaped double quotes> [-opatch_pre_end] ]
                      [-profile_mask ]
                      [ -property_file ]
                      [-ptlConnect ]
                      [-ptlPassword ]
                      [-ptlSchema ]
                      [ -remote_nodes ]
                      [-retry ] [-runSql] [-silent ]
                      [-skip_subset] [-skip_duplicate]
                      [-sqlScript ] [-verbose ]


OPTIONS
       -all_nodes
              Apply the patch using all-node mode.

       -connectString
              This option can be used to specify the list of database
              instances on which the patch needs to be applied. The
              value for this option is specified as per the following
              syntax "SID:User:Passwd:Node". The SID is a must, others
              can be ignored, OPatch takes default values for it.
              Ex: oracle:dba:dba:mymachine,oracle1:::
              NOTE: If the system is not part of RAC setup, then to
              patch just the local node, provide the node name as
              empty string.

       -delay
              If -retry is specified, this options tells OPatch how
              many seconds it should wait before attempting to lock
              inventory again in case of a previous failure.

       -force
              This option is meaningful with 'silent' option and is used
              to override the behavior of silent under specific
              circumstances.

       -force_conflict
              If a conflict exist which prevents the patch from being
              applied, the -force_conflict flag can be used to apply the patch.
              OPatch will remove all the conflicting patches before
              applying the current patch. This will override the 'silent'
              behavior for conflicts and hence is meaningful only when
              used with 'silent' option.

       -id
              Use 'lsinventory' option to display all patch ids. Each one-off
              patch is indicated by its id. A comma separated list of patches
              can be given to select the patches to be applied. For
              translation patches, the patch id should be of the format
              /.

       -idFile
              The input to be given is a file location that contains a list
              of apply patch ids separated by commas or white spaces. This
              option cannot to be in conjunction with 'id' option. For
              translation patches, the patch id should be of the format
              /.

       -init
              This option is used to pass parameters to the init
              script. This script is executed before prerequisite checks
              are run. The value for this option have to be enclosed
              in double quotes. The parameters will be common parameters
              which will be passed to init scripts of all patches being
              applied. This option should be ended by option
              'opatch_init_end'.

       -invPtrLoc
              Used to locate the oraInst.loc file. Needed when the
              installation used the -invPtrLoc flag. This should be
              the path to the oraInst.loc file.

       -jre
              This option tells OPatch to use JRE (java) from the
              specified location instead of the default location
              under Oracle Home.

       -local
              Patch the local node, then update inventory of the
              local node. Do not propagate the patch or inventory
              update to other nodes.

       -local_node
              This option can be used to specify to OPatch the local
              node name to be used for RAC mode application of the patch.

       -minimize_downtime
              Only applied to RAC instances. User supplies the
              order of nodes to be patched. This option cannot be
              used in conjunction with -local option with a rolling
              patch.

       -no_bug_superset
              This option tells OPatch to error out if the current
              patch's bugs-to-fix is a super-set (or same set) of an
              installed patch's bugs-fixed in the Oracle Home.

       -no_inventory
              Bypass the inventory for reading and updates.

       -no_relink
              The nolink option does not perform any make operations.
              This option can be used during multiple patch.
              applications and perform the linking step only once.
              OPatch does not keep track of the make operations it
              did not perform. It is the job of the OPatch users to
              make sure the execute OPatch without this option at
              the end, so that compilation happens once.

       -no_sysmod
              This option specifies not to update the files in the
              system. It just updates the inventory. It also will not
              execute the pre and post scripts.

       -ocmrf
              Give OPatch the absolute path to the OCM response file
              to be used for OCM configuration. -silent must be used
              in conjunction with -ocmrf if Oracle Home doesn't have
              OCM installed and configured.

       -oh
              The oracle home to work on. This takes precedence over
              the environment variable ORACLE_HOME.

       -opatch_init_end
              This option is used to mark the end of init options.
              Without this option everything after init till end of
              the command is passed into init. This option is
              meaningless without -init option.

       -opatch_post_end
              This option is used to mark the end of post options.
              Without this option everything after post till end of
              the command is passed into post. This option is
              meaningless without -post option.

       -opatch_pre_end
              This option is used to mark the end of pre options.
              Without this option everything after pre till end of
              the command is passed into pre. This option is
              meaningless without -pre option.

       -phBaseDir
              Used to specify a directory containing patch directories (or)
              zip files.

       -phBaseFile
              If is not specified, use this option
              to point OPatch to a file containing a list of patches
              to be n-applied. Each line in the file points to a location
              of a patch.

       -ptlConnect
              This option can be used to specify the connect string of the
              portal schema

       -ptlPassword
              This option can be used to specify the password of the portal
              schema

       -ptlSchema
              This option can be used to specify the schema of the portal
              repository patch

       -post
              This option is used to pass parameters to the post script.
              This script is executed after application of the patch.
              The value for this option have to be enclosed in double
              quotes. The parameters will be common parameters which will
              be passed to post scripts of all patches being applied.
              This option should be ended by option 'opatch_post_end'.

       -pre
              This option is used to pass parameters to the pre
              script. This script is executed before application of
              the patch. The value for this option have to be enclosed
              in double quotes. The parameters will be common parameters
              which will be passed to pre scripts of all patches being
              applied. This option should be ended by option
              'opatch_pre_end'.

       -profile_mask
              If the patch to be applied specifies WLS patch/patchset
              as prerequisites, OPatch will read the WLS default patch
              profile. To have OPatch read non-default patch profile,
              specify the patch profile name with this option.

       -property_file
              The user defined property file for OPatch to use. The
              path to the property file should be absolute. This
              property file takes precedence over the one that is
              supplied with OPatch.

       -remote_nodes
              This option can be used to specify to OPatch the list
              of remote nodes to be used for RAC mode application of
              the patch. The node names are comma separated and
              without spaces.

       -report
              Just prints out the actions without executing.

       -retry
              This option tells OPatch how many times it should retry
              in case of an inventory lock failure.

       -runSql
              This option can be used to specify OPatch to run the
              sql scripts and sql procedures if they are present in the
              given patch.

       -silent
              This suppresses any user-interaction.

       -skip_duplicate
              This skips patches to be applied that are duplicates of
              other patches installed in the Oracle Home. Two patches
              are duplicates if they fix the same set of bugs.

       -skip_subset
              This skips patches to be applied that are subset of
              other patches installed in the Oracle Home. One patch is
              a subset of another patch if the former fixes a subset
              of bugs fixed by the latter.


       -sqlScript
              This option can be used to specify the custom sql script
              to be run by OPatch after patching is completed

       -verbose
              This option prints more OPatch output to the screen as
              well as to the log file.

Example:

'opatch napply ' to apply all patches under
directory

'opatch napply -id 1,2,3' to apply patches
1, 2, and 3 which are present under
directory

'opatch napply -skip_subset -skip_duplicate'
to apply all patches under directory.
OPatch will skip duplicate patches and subset patches
(patches under that are subsets of patches
installed in the Oracle Home)

'opatch napply -id 1,2,3 -skip_subset -skip_duplicate'
to apply patches 1, 2, and 3 which are under
diretory. OPatch will skip duplicate patches and subset patches
(patches under that are subsets of patches
installed in the Oracle Home)

'opatch napply -idfile /tmp/list.txt' where list.txt contains
a list of patch IDs to be applied. The list should be separated by a space or
comma. For example: 1 2 3

'opatch napply -id 1/fr,2/de' to apply patches 1 (french
patch), 1 (german patch) which are present in the directory.

OPatch succeeded.
[oracle@slient ~]$

[oracle@slient ~]$ opatch nrollback -help
Oracle Interim Patch Installer version 11.2.0.3.4
Copyright (c) 2012, Oracle Corporation. All rights reserved.

DESCRIPTION
    This operation is used to Rollback a set of patches at a time.
    Use -silent to Rollback the patches in silent mode.

SYNTAX
opatch nrollback -id
                      [ -all_nodes ]
                      [-connectString ]
                      [-delay ] -id
                      [-idFile <file location="" containing="" a="" list="" of
                       rollback IDs separated by commas or white spaces>
                      [-init <parameters for="" the="" init="" script="" in="" escaped="" double
                       quotes> [-opatch_init_end] ]
                      [-invPtrLoc ]
                      [-jre ] [-local]
                      [-local_node ]
                      [-no_inventory] [-no_relink] [-no_sysmod]
                      [-oh ]
                      [-post <parameters for="" the="" post="" script="" in=""
                       escaped double quotes>[ -opatch_post_end] ]
                      [-pre <parameters for="" the="" pre="" script="" in=""
                       escaped double quotes> [-opatch_pre_end] ]
                      [-property_file ]
                      [-ptlConnect ]
                      [-ptlPassword ]
                      [-ptlSchema ]
                      [-remote_nodes ]
                      [-retry ] [-runSql] [-silent]
                      [-sqlScript ] [-verbose]


OPTIONS
       -all_nodes
              Rollback the patch using all-nodes mode.

       -connectString
              This option can be used to specify the list of database
              instances on which the patch needs to be applied. The
              value for this option is specified as per the following
              syntax "SID:User:Passwd:Node". The SID is a must, others
              can be ignored, OPatch takes default values for it.
              Ex: oracle:dba:dba:mymachine,oracle1:::
              NOTE: If the system is not part of RAC setup, then to
              patch just the local node, provide the node name as
              empty string.

       -delay
              If -retry is specified, this option tells OPatch how
              many seconds it should wait before attempting to lock
              inventory again in case of a previous failure.

       -id
              Use 'lsinventory' option to display all patch ids.
              Each one-off patch is indicated by its id. To rollback
              a patch the id for that patch must be supplied. A comma
              separated list of patches to be rolled back must be given.
              For translation patches, the patch id should be of the
              format / (ex: 1234/fr)

       -idFile
              Use 'lsinventory' option to display all patch ids.
              Each one-off patch is indicated by its id. To rollback a patch,
              the id for that patch must be supplied. The input to be given is
              a file location that contains a list of rollback patch ids
              separated by commas or white spaces. For translation patches,
              the patch id should be of the format /.
              This option cannot to be in conjunction with 'id' option.

       -init
              This option is used to pass parameters to the init
              script. This script is executed before prerequisite checks
              are run. The value for this option have to be enclosed
              in double quotes. The parameters will be common parameters which
              will be passed to init scripts of all patches being rolled back.
              This option should be ended by option 'opatch_init_end'.

       -invPtrLoc
              Used to locate the oraInst.loc file. Needed when the
              installation used the invPtrLoc flag. This should be
              the path to the oraInst.loc file.

       -jre
              This option tells OPatch to use JRE (java) from the
              specified location instead of the default location
              under Oracle Home.

       -local
              Roll back then update inventory of the local node.
              Do not propagate the patch or inventory update to other
              nodes.

       -local_node
              This option can be used to specify to OPatch the local
              node name to be used for RAC mode rollback of the patch.

       -no_inventory
              This option specifies not to update the inventory, it
              just updates the files in the system.
              If inventory is readable, then OPatch tries to read the
              inventory.
              NOTE: -phBaseDir or -phBaseFile has to be used to
                    specify the patch location(s).

       -no_relink
              Do not perform the make operations in the patch. This
              option can be used during multiple patch removals and
              perform the compilation step only once.

       -no_sysmod
              This option specifies not to update the files in the
              system. It just updates the inventory. It also will not
              execute the pre and post scripts.

       -oh
              The oracle home to work on. This takes precedence over
              the environment variable ORACLE_HOME.

       -opatch_init_end
              This option is used to mark the end of init options.
              Without this option everything after init till end of
              the command is passed into init. This option is
              meaningless without -init option.

       -opatch_post_end
              This option is used to mark the end of post options.
              Without this option everything after post till end of
              the command is passed into post. This option is
              meaningless without -post option.

       -opatch_pre_end
              This option is used to mark the end of pre options.
              Without this option everything after pre till end of
              the command is passed into pre. This option is
              meaningless without -pre option.

       -post
              This option is used to pass parameters to the post
              script. This script is executed after removal of the
              patch. The value for this option have to be enclosed
              in double quotes. The parameters will be common parameters
              which will be passed to post scripts of all patches being
              rolled back. This option should be ended by option
              'opatch_post_end'.

       -pre
              This option is used to pass parameters to the pre script.
              This script is executed before removal of the patch. The
              value for this option have to be enclosed in double quotes.
              The parameters will be common parameters which will be
              passed to pre scripts of all patches being rolled back.
              This option should be ended by option 'opatch_pre_end'.

       -property_file
              The user defined property file for OPatch to use. The
              path to the property file should be absolute. This
              property file takes precedence over the one that is
              supplied with OPatch.

       -ptlConnect
              This option can be used to specify the connect string of the
              portal schema

       -ptlPassword
              This option can be used to specify the password of the portal
              schema

       -ptlSchema
              This option can be used to specify the schema of the portal
              repository patch

       -remote_nodes
              This option can be used to specify to OPatch the list
              of remote nodes to be used for RAC mode rollback of
              the patch. The node names are comma separated and
              without spaces.

       -report
              Just prints out the actions, without executing.

       -retry
              This option tells OPatch how many times should retry in
              case of an inventory lock failure.

       -runSql
              This option can be used to specify OPatch to run the
              sql scripts and sql procedures if they are present in the
              given patch.

       -silent
              This suppresses any user-interaction and defaults any
              Y|N question to Y. This option is not supported on
              RAC yet.

       -sqlScript
              This option can be used to specify the custom sql script
              to be run by OPatch after patching is completed

       -verbose
              This option prints more OPatch output to the screen
              as well as to the log file.

Example:
'opatch nrollback -id 1,2,3' to roll back patches 1, 2, and 3
that have been installed in the Oracle Home.
'opatch nrollback -id 1/fr,2/de to rollback patches 1 with language 'fr',
2 with language 'de' that have been installed in the Oracle Home.

OPatch succeeded.
[oracle@slient ~]$

[oracle@slient ~]$ opatch rollback -help
Oracle Interim Patch Installer version 11.2.0.3.4
Copyright (c) 2012, Oracle Corporation. All rights reserved.

DESCRIPTION
    Roll back an existing patch indicated by the reference-id.

SYNTAX
opatch rollback -id [-connectString ]
                [-delay ]
                [-init <parameters for="" the="" init="" script="" in="" escaped="" double
                 quotes> [-opatch_init_end] ]
                [-invPtrLoc ]
                [-jre ] [-local]
                [-local_node ] [-no_inventory]
                [-no_relink] [-no_sysmod]
                [-oh ] [-ph ]
                [-post <parameters for="" the="" post="" script="" in="" escaped
                 double quotes>[ -opatch_post_end] ]
                [-pre <parameters for="" the="" pre
                 script in escaped double quotes> [-opatch_pre_end] ]
                [-property_file ]
                [-ptlConnect ]
                [-ptlPassword ]
                [-ptlSchema ]
                [-remote_nodes ]
                [-retry ] [-runSql] [-silent]
                [-sqlScript ] [-verbose]
                [all_subpatches]

OPTIONS
       -all_nodes
              Roll back the patch using all-nodes mode.

       -connectString
              This option can be used to specify the list of database
              instances on which the patch needs to be applied. The
              value for this option is specified as per the following
              syntax "SID:User:Passwd:Node". The SID is a must, others
              can be ignored, OPatch takes default values for it.
              Ex: oracle:dba:dba:mymachine,oracle1:::
              NOTE: If the system is not part of RAC setup, then to
              patch just the local node, provide the node name as
              empty string.

       -delay
              If -retry is specified, this option tells OPatch how
              many seconds it should wait before attempting to lock
              inventory again in case of a previous failure.

       -id
              Use 'lsinventory' option to display all patch id's.
              Each one-off patch is indicated by its id. To roll back
              a patch the id for that patch must be supplied. For
              translation patches, Please specify /
              (ex: 1234/fr)

       -init
              This option is used to pass parameters to the init
              script. This script is executed before prerequisite checks
              are run. The value for this option have to be enclosed
              in double quotes. This option should be ended by
              option 'opatch_init_end'.

       -invPtrLoc
              Used to locate the oraInst.loc file. Needed when the
              installation used the invPtrLoc flag. This should be
              the path to the oraInst.loc file

       -jre
              This option tells OPatch to use JRE (java) from the
              specified location instead of the default location
              under Oracle Home.

       -local
              Roll back then update inventory of the local node.
              Do not propagate the patch or inventory update to other
              nodes

       -local_node
              This option can be used to specify to OPatch the local
              node name to be used for RAC mode rollback of the patch

       -no_inventory
              This option specifies not to update the inventory, it
              just updates the files in the system.
              If inventory is readable, then OPatch tries to read the
              inventory.
              NOTE: ph has to be used to specify the patch location.

       -no_relink
              Do not perform the make operations in the patch. This
              option can be used during multiple patch removals and
              perform the compilation step only once

       -no_sysmod
              This option specifies not to update the files in the
              system. It just updates the inventory. It also will not
              execute the pre and post scripts

       -oh
              The oracle home to work on. This takes precedence over
              the environment variable ORACLE_HOME

       -opatch_init_end
              This option is used to mark the end of init options.
              Without this option everything after init till end of
              the command is passed into init. This option is
              meaningless without -init option.

       -opatch_post_end
              This option is used to mark the end of post options.
              Without this option everything after post till end of
              the command is passed into post. This option is
              meaningless without -post option.

       -opatch_pre_end
              This option is used to mark the end of pre options.
              Without this option everything after pre till end of
              the command is passed into pre. This option is
              meaningless without -pre option.

       -ph
              Specify the valid patch directory area. Rollback will
              use the command types found in the patch directory to
              identify what commands are to be used for the current
              operating system

       -post
              This option is used to pass parameters to the post
              script. This script is executed after removal of the
              patch. The value for this option have to be enclosed
              in double quotes. This option should be ended by
              option 'opatch_post_end'.

       -pre
              This option is used to pass parameters to the pre
              script. This script is executed before removal of the
              patch. The value for this option have to be enclosed in
              double quotes. This option should be ended by option
              'opatch_pre_end'.

       -property_file
              The user defined property file for OPatch to use. The
              path to the property file should be absolute. This
              property file takes precedence over the one that is
              supplied with OPatch

       -ptlConnect
              This option can be used to specify the connect string of the
              portal schema

       -ptlPassword
              This option can be used to specify the password of the portal
              schema

       -ptlSchema
              This option can be used to specify the schema of the portal
              repository patch

       -remote_nodes
              This option can be used to specify to OPatch the list
              of remote nodes to be used for RAC mode rollback of
              the patch. The node names are comma separated and
              without spaces

       -report
              Just prints out the actions, without executing

       -retry
              This option tells OPatch how many times should retry in
              case of an inventory lock failure.

       -runSql
              This option can be used to specify OPatch to run the
              sql scripts and sql procedures if they are present in the
              given patch.

       -silent
              This suppresses any user-interaction and defaults any
              Y|N question to Y. This option is not supported on
              RAC yet

       -sqlScript
              This option can be used to specify the custom sql script
              to be run by OPatch after patching is completed

       -verbose
              This option prints more OPatch output to the screen
              as well as to the log file

       -all_subpatches
              This option is valid ONLY for composite patches. It allows
              the user to rollback all subpatches of a composite series
              in one shot.

PARAMETERS
       Patch ID of the patch to be rolled back unless the command is
       invoked within a patch area. For translation patches, it will
       be /.

OPatch succeeded.
[oracle@slient ~]$

[oracle@slient ~]$ opatch query -help
Oracle Interim Patch Installer version 11.2.0.3.4
Copyright (c) 2012, Oracle Corporation. All rights reserved.

DESCRIPTION
        This operation loads and prints out various information about a patch.
        Parameter patch_location points to where a patch is located.
        For example, if you specify "path", there should be sub-dir.
        "etc/config" under "path".

SYNTAX
        opatch query [-all] [-is_auto_patch] [-is_translatable_patch]
                      [-get_base_bugs] [-get_component] [-get_os] [-get_date]
                      [-get_patch_language] [-get_patch_type] [-get_patching_model]
                      [-get_product_family] [-get_update_components] [-has_sql]
                      [-is_online_patch] [-is_patchset_update]
                      [-is_portal_patch] [-is_rolling_patch]
                      [-jre ] [-oh ]
                      [ ]

OPTIONS
           -all
                Get everything available about a patch. This is equivalent
                to setting all available options.

           -is_auto_patch
                This option says 'true' if the patch is auto-enabled,
                'false' otherwise.

           -is_translatable_patch
                This option says 'true' if the patch is translatable,
                'false' otherwise.

           -get_base_bug
                Get bugs fixed by the patch

           -get_component
                Get components touched by the patch.

           -get_update_components
                Get all components to be upgraded in a Patchset Update.

           -get_date
                Get patch creation date and time.

           -get_os
                Get platforms for which this patch could be applied.

           -get_patch_type
                Get the patch type.

           -get_patching_model
                Get the patching model.

           -get_patch_language
                Get the language supported by the patch.

           -get_product_family
                Get the product family to which the patch belongs.

           -has_sql
                This option says 'true' if the patch has sql related actions,
                'false' otherwise.

           -is_online_patch
                This option says 'true' if the patch is a online patch,
                'false' otherwise.

           -is_patchset_update
                This option says 'true' if the patch is a Patchset Update,
                'false' otherwise.

           -is_portal_patch
                This option says 'true' if the patch has portal actions,
                'false' otherwise.

           -is_rolling_patch
                This option says 'true' if the patch is a rolling patch,
                'false' otherwise.

           -jre
                This option tells OPatch to use JRE (java) from the specified
                location instead of the default location under Oracle Home.

           -oh
                The oracle home to work on. This takes precedence over the
                environment variable ORACLE_HOME.

PARAMETERS
        The location of the patch to be queried.
        If the patch location is not specified, then the current directory
        is taken as the patch location.

OPatch succeeded.
[oracle@slient ~]$

[oracle@slient ~]$ opatch version -help
Oracle Interim Patch Installer version 11.2.0.3.4
Copyright (c) 2012, Oracle Corporation. All rights reserved.

DESCRIPTION
    Print the version of OPatch for a particular $ORACLE_HOME or display all
    OPatch version in the Central Inventory.

SYNTAX
opatch version [-all] [-invPtrLoc ]
               [-jre ] [-oh ]
               [-v2c <5-digit version=""> -oui_loc
                -ph -ohs <list of="" oracle="" homes
                separated by commas]
               [-help] [-h]

OPTIONS
       -all
               This option displays versions of OPatch(es) of all
               Oracle Homes registered in the Central Inventory.

       -invPtrLoc
               Used to locate the oraInst.loc file. When the
               installation used the invPtrLoc flag. This should be
               the path to the oraInst.loc file

       -jre
               This option tells OPatch to use JRE (java) from the
               specified location instead of the default location
               under Oracle Home

       -oh
               The Oracle home to work on. This takes precedence over
               the environment variable ORACLE_HOME
       -v2c
               The standard 5-digit version to compare. If this option is
               specified with an valid version which made by no more
               than 5 numbers separated by '.', those oracle homes
               with valid version will be break up to two parts, one
               is those oracle homes which have opatch version higher
               or equal to the value of this option, and the other is
               those with lower version

       -ph
               The patch location from where the Minimum OPatch Version
               (if defined) will be picked. If a valid patch location is
               provided, will take the required minimum opatch version
               from the patch and set it as the standard opatch version
               to be compared to

       -ohs
               List of Oracle Homes to be considered. Please provide
               them separated by commas

       -help (or) -h
               Display valid options can be attached to this opereation

PARAMETERS

       This operation does not have any required parameters.

OPatch succeeded.
[oracle@slient ~]$

[oracle@slient ~]$ opatch prereq -help
Oracle Interim Patch Installer version 11.2.0.3.4
Copyright (c) 2012, Oracle Corporation. All rights reserved.

DESCRIPTION
    This operation runs the prerequisite checks on an ORACLE_HOME.

SYNTAX
opatch prereq [-id ]
                        [-invPtrLoc ]
                        [-jre ] [-local_node ]
                        [-oh ]
                        [-ph ]
                        [-phBaseDir ]
                        [-phBaseFile <path to="" the="" file="" containing="" the
                          location of the patches to be applied>]
                        [-property_file ]
                        [-remote_nodes ]
                        [-sid ]
                        [-connectString ]

COMMANDS

       CheckActiveFilesAndExecutables
              Check if there are any file(s) that are active,
              which are touched by the patch to be applied
              or rolled back.

       CheckActiveServices
              Check for the services that are active.
              Note: Applicable for Windows platforms only.

       CheckApplicable
              Check for the presence of the required components in
              the ORACLE_HOME and check if all the actions of the
              given patch(es) are applicable.

       CheckApplicableProduct
              Check if the patch is applicable for the given Oracle Home.
              If the patch is marked for stand-alone homes, then it can not
              be applied on normal oui-based home and vice versa.
              Also, a patch can be marked as a hybrid patch, where it is
              applicable for both homes.

       CheckCentralInventoryForOH
              Check if the given ORACLE_HOME is registered
              in the central inventory specified by the
              oraInst.loc file.

       CheckCentralInventoryForRWSession
              Check if a RW (read-write) session can be created
              for the given central inventory.

       CheckCentralInventoryLocation
              Validate the Central Inventory location. Check if it
              has the correct directory structure and has the
              inventory.xml with read permissions.

       CheckComponents
              Check for the presence of the required components in
              the ORACLE_HOME.

       CheckConflictAgainstOH
              Check if there are any conflicts between the patch(es)
              to be applied and the patch(es) in the OH.

       CheckConflictAgainstOHWithDetail
              Check if there are any conflicts between the patch(es)
              to be applied and the patch(es) in the OH, by giving
              out the detailed information about the
              conflicts/supersets.

       CheckConflictAmongPatches
              Check if there are any conflicts among the patch(es)
              to be applied.

       CheckConflictAmongPatchesWithDetail
              Check if there are any conflicts among the patch(es)
              to be applied, by giving out the detailed information
              about the conflicts/supersets.

       CheckFusionAppsCompatible
              Check if OUI for the Oracle Home supports patching of
              Fusion applications.

       CheckForCRSHomeIfRAC
              Check if the given Central Inventory has a CRS Home
              registered with it, if it is a RAC setup.

       CheckForIdenticalPatchInOracleHome
              Check if the given list of patch(es) are identical with
              respect to the patch(es) installed in the Oracle Home.

       CheckForNoOpPatches
              Check if any of the patch(es) provided by the user are no-op.
              patches. A no-op patch. cannot be applied to the Oracle Home
              and can be skipped. This prereq will fail for no-op. patches.

       CheckIfOHLockedForPatching
              Check if the ORACLE_HOME is locked for patching
              by any previous unsuccessful OPatch Session.

       CheckInstalledOneOffs
              Check if all the patches provided by the user to rollback
              are present in the given Oracle Home.

       CheckMinimumOPatchVersion
              Check if all the patches provided by the user satisfy
              the requirement of minimum OPatch version for the OPatch
              currently being used.

       CheckOracleHome
              Check if the given ORACLE_HOME is valid. Check if it
              has the inventory files with proper permissions.

       CheckOraInstLocation
              Check if the oraInst.loc file is proper and has the
              read permissions.

       CheckOUILocation
              Check the ORACLE_HOME for the presence of OUI.

       CheckOUIVersionCompatible
              Check if the OUI in the ORACLE_HOME is compatible
              for the OPatch.

       CheckPatchApplicableOnCurrentPlatform
              Check if the given patch(es) is applicable on the
              current platform.

       CheckPatchApplyDependents
              Check if all the patch(es) required by the patch(es)
              currently being installed is present in the Oracle Home or not.

       CheckPatchRollbackDependents
              Check if there are any patch(es) in the Oracle Home that are
              depending on the patch(es) being currently rolled back.

       CheckPatchShipHome
              Check if the given patch to be applied has the
              proper structure and has the correct permissions
              for all the files.

       CheckRACNodeList
              Check if all the nodes in the RAC setup are valid, up
              and reachable.

       CheckRemoteCommandInvocable
              Check if commands can be invoked on the remote machines.

       CheckRemoteCopyAndRemove
              Check if files can be copied to and removed from the
              remote machines.

       CheckRequiredLibs
              Check if all the required OUI libraries are present
              in the given ORACLE_HOME.

       CheckRollbackable
              Check if the given patch(es) can be rolled back from
              the ORACLE_HOME.

       CheckRollbackSid
              Check if the given patch(es) can be rolled back from
              the ORACLE_HOME using the given SIDs.

       CheckStandAloneHome
              Check if the Oracle Home is a stand-alone home or a
              normal oui-based home.

       CheckSystemCommandAvailable
              Check if all the commands required for applying or
              rolling back the given patch are present in the system.

       CheckSystemSpace
              Check if enough system space is available for
              the patch(es) to be applied.

       CheckUserAdminPrivilege
              Check is the user is 'root'.
              Note: OPatch should not be invoked by 'root', if so
                    then this check fails.

       CheckPatchingModel
              Check if the patching model of all incoming patch(es) is
              compatible with that of the Oracle Home.

       CheckPatchsetUpdateCompatible
              Check if the given patches and the OUI together are
              Patch Set Update compatible.

       CheckPatchsetUpdateComponents
              Check if the components to be upgraded in the Patch Set
              Update are valid.

OPTIONS

       -connectString
              This option can be used to specify the list of database
              instances and remote nodes. The value for this option is
              specified as per the following syntax "SID:User:Passwd:Node".
              The SID is a must, others can be ignored, OPatch takes
              default values for it.
              Ex: oracle:dba:dba:mymachine,oracle1:::
              NOTE: If the system is not part of RAC setup, then to
              specify just the local node, provide the node name as
              empty string. This option cannot be used along with 'sid'
              option.

       -id
              This option can be used to specify the patch IDs of all
              the patches that are to be rollbacked from the given OH.

       -invPtrLoc
              Used to locate the oraInst.loc file. Needed when the
              installation used the -invPtrLoc flag. This should be
              the path to the oraInst.loc file.

       -jre
              This option tells OPatch to use JRE (java) from the
              specified location instead of the default location
              under Oracle Home.

       -local_node
              This option can be used to specify to OPatch the local
              node name to be used for RAC mode application of the patch.

       -oh
              The oracle home to work on. This takes precedence over
              the environment variable ORACLE_HOME.

       -ph
              This option can be used to specify the path to the
              patch location. Ex: /tmp/101010

       -phBaseDir
              This option can be used to specify the path to base dir
              where all the patches to be applied are kept.
              Note: The directory should contain only non-duplicate patches
                    in zipped or unzipped format.

       -phBaseFile
              This option can be used to specify complete path to the
              file containing the location of the patches to be applied.

       -property_file
              The user defined property file for OPatch to use. The
              path to the property file should be absolute. This
              property file takes precedence over the one that is
              supplied with OPatch.

       -remote_nodes
              This option can be used to specify to OPatch the list
              of remote nodes to be used for RAC mode application of
              the patch. The node names are comma separated and
              without spaces.

       -sid
              This option can be used to specify the SIDs of the database
              instances. This option can be used only for local system
              operations.

OPatch succeeded.

[oracle@slient ~]$ opatch util -help
Oracle Interim Patch Installer version 11.2.0.3.4
Copyright (c) 2012, Oracle Corporation. All rights reserved.

DESCRIPTION
    This operation invokes the chosen utilities on an ORACLE_HOME.

SYNTAX
opatch util [ -help ] [ COMMAND ]

Use opatch util [ COMMAND ] -help to get help on a particular command.

COMMANDS
        ApplySql
              Apply sql, sql procedure related actions for patches, which
              are already applied using Apply or NApply operation.

        CheckMinimumOpatchVersion
              Check if patch is compatible with the given user input version

        CheckComponents
              Check if the given patch is suitable for the Oracle Homes
              registered in the central inventory by components check

        Cleanup
              Remove the backup for restore area of the given patch
              or for all the patches.

        CopyListedDirs
             Recursively copy all directories listed in
             ORACLE_HOME/.patch_storage//rac/copy_dirs.txt
             to remote nodes.

        CopyListedDirsTest
             Recursively copy a single directory to remote nodes.

        CopyListedFiles
              Copy all files listed in
              ORACLE_HOME/.patch_storage//rac/copy_files.txt
              to remote nodes.

        CopyListedFilesTest
             Copy a single file to remote nodes.

        DisableOnlinePatch
             Disable and remove the specified online patch(es)
             on the given database instances.

        EnableOnlinePatch
             Install and enable the specified online patch(es)
             on the given database instances.

        InstallOCM
             Install and configure OCM.

        IsShared
             Returns true if running on shared environment, else it returns
             false.

        LoadXML
             Prompt for path/name of the XML file, then check if the
             XML is correct.

        RemoveListedDirs
             Recursively remote directories listed in
             ORACLE_HOME/.patch_storage//rac/remove_dirs.txt
             on remote nodes.

        RemoveListedDirsTest
             Recursively remove a directory on remote nodes.

        RemoveListedFiles
             Remove files listed in
             ORACLE_HOME/.patch_storage//rac/remove_files.txt
             on remote nodes.

        RemoveListedFilesTest
             Remove a single file on remote nodes.

        RestoreOH
             Restore the OracleHome to the previous state.

        RollbackSql
              Rollback sql, sql procedure related actions for patches, which
              are already rolled back using Rollback or NRollback operation.

        RunAnyCommand
             Run any command on remote nodes.

        RunLocalMake
             Invoke re-link on the local node. Commands are stored in
             ORACLE_HOME/.patch_storage//make.txt.

        RunRemoteMake
             Invoke re-link on remote nodes. Commands are stored in
             ORACLE_HOME/.patch_storage//rac/make_cmds.txt.

        SaveConfigurationSnapshot
             Save configuration snapshot of current GI home to specified
             file. ORACLE_HOME shall point to GI home. Default snapshot file is
             ORACLE_HOME/cfgtoollogs/opatch/oplan/configData.xml

        UpdateRemoteNodes
             Propagate/Remove files/directories to/on remote nodes
             using files under ORACLE_HOME/.patch_storage//rac/*.

        UpdateOPatchVersion
             Update the version of OPatch in the inventory of
             Oracle Home.

        Verify
             Using the defined ORACLE_HOME and given patch location via
             -ph, the program will check to make sure the patch was
             applied to the ORACLE_HOME.
             Example: 'opatch util verify -ph /tmp/patchLoc'

OPatch succeeded.
[oracle@slient ~]$

向AI問一下細節

opatch命令參數解析

猜你喜歡

最新資訊

相關推薦

相關標簽