heartbeat+ipvs+keepalived

1.高可用Heartbeat

Server1和server4安裝資源包

   heartbeat-3.0.4-2.el6.x86_64.rpm

   heartbeat-devel-3.0.4-2.el6.x86_64.rpm

   heartbeat-libs-3.0.4-2.el6.x86_64.rpm

   ldirectord-3.9.5-3.1.x86_64.rpm

yum install -y heartbeat-*

[root@server1 ha.d]# cd /usr/share/doc/heartbeat-3.0.4/

[root@server1 heartbeat-3.0.4]# cp ha.cf authkeys haresources /etc/ha.d/

[root@server1 heartbeat-3.0.4]# cd /etc/ha.d

[root@server1 ha.d]# vim ha.cf

[root@server1 ha.d]# vim authkeys

[root@server1 ha.d]# chmod 600 authkeys 

[root@server1 ha.d]# vim haresources 

[root@server1 ha.d]# scp ha.cf authkeys haresources server4:/etc/ha.d

[root@server1 ha.d]# /etc/init.d/heartbeat start

Server4做相同的操作

[root@server4 ha.d]# /etc/init.d/heartbeat start

測試：

[root@server1 ha.d]# /etc/init.d/heartbeat stop

[root@server1 ha.d]# /etc/init.d/heartbeat start

1.ipvs負載均衡

首先停掉server1和server4上的heartbeat

Server1上的操作,并且server1做調度器

[root@server1 ~]# yum install -y ldirectord-3.9.5-3.1.x86_64.rpm

[root@server1 ~]# cd /usr/share/doc/ldirectord-3.9.5/

[root@server1 ldirectord-3.9.5]# cp ldirectord.cf /etc/ha.d

[root@server1 ~]# yum install -y ipvsadm

[root@server1 ~]# ipvsadm -L  

[root@server1 ~]# ipvsadm -C   ##清除規則

[root@server1 ~]# ipvsadm -A -t 172.25.6.100:80 -s rr    ##rr表示采用輪詢調度算法，添加新的虛擬ip

[root@server1 ~]# ip addr add 172.25.6.100/24 dev eth0

[root@server1 ~]# ip addr

[root@server1 ~]# ipvsadm -a -t 172.25.6.100:80 -r 172.25.6.2:80 -g   ##添加新規則

[root@server1 ~]# ipvsadm -a -t 172.25.6.100:80 -r 172.25.6.3:80 -g

[root@server1 ~]# /etc/init.d/ipvsadm save   ##保存添加的規則

 [root@server1 ~]# ipvsadm -L      ##顯示內核中虛擬服務器列表

[root@server1 ~]# /etc/init.d/httpd restart

Server2上的操作

[root@server2 ~]# ip addr add 172.25.6.100/32 dev eth0

[root@server2 ~]# ip addr

[root@server2 ~]# yum install -y arptables_jf

[root@server2 html]# arptables -A IN -d 172.25.6.100 -j DROP

[root@server2 html]# arptables -A OUT -s 172.25.6.200 -j mangle --mangle-ip-s 172.25.6.2

[root@server2 html]# /etc/init.d/arptables_jf  save

[root@server2 html]# /etc/init.d/httpd restart

Server3上的操作

[root@server3 ~]# /etc/init.d/httpd start

[root@server3 ~]# ip addr add 172.25.6.100/32 dev eth0   ##給內網網卡添加ip

[root@server3 ~]# ip addr

[root@server3 ~]# yum install -y arptables_jf

[root@server3 html]# arptables -A IN -d 172.25.6.100 -j DROP  ##給這個地址追加策略

[root@server3 html]# arptables -A OUT -s 172.25.6.100 -j  mangle --mangle-ip-s 172.25.6.3  ##追加策略，由100源地址跳到3上

[root@server3 ~]# /etc/init.d/arptables_jf save  ##保存添加的策略

[root@server3 ~]# /etc/init.d/arptables_jf start 

[root@server3 ~]# /etc/init.d/httpd restart

測試：

2.高可用與負載均衡

[root@server1 ~]# yum install -y ldirectord-3.9.5-3.1.x86_64.rpm

[root@server1 ~]# cd /etc/ha.d/

[root@server1 ha.d]# vim ldirectord.cf 

[root@server1 ha.d]# ipvsadm -C  ##清除策略

[root@server1 ha.d]# ipvsadm -L   ##查看策略

[root@server1 ha.d]# ip addr del 172.25.6.100/24 dev eth0    ##刪除內網網卡上的ip

[root@server1 ha.d]# vim haresources 

[root@server1 ha.d]# scp haresources ldirectord.cf  172.25.6.4:/etc/ha.d/      ##server4上做與server1相同的操作

打開server4上的heartbeat替代server1的heartbeat

[root@server1 html]# /etc/init.d/httpd restart

測試：

如果server2和server3的httpd打開

如果server2和server3  httpd關閉，則訪問heartbeat所在的主機

4.keepalived

關閉server1和server4的heartbeat，打開server2和server3的httpd

Server1上的操作

[root@server1 ~]# tar zxf keepalived-1.2.20.tar.gz

[root@server1 ~]#cd keepalived-1.2.20/

[root@server1 keepalived-1.2.20]# ./configure --prefix=/usr/local/keepalived/  ##解譯到指定路徑

[root@server1 keepalived-1.2.20]# make &&  make install

[root@server1 keepalived-1.2.20]# cd /usr/local/keepalived/

[root@server1 local]# scp -r keepalived/ 172.25.6.4:/usr/local/

[root@server1 sbin]#

 ln -s /usr/local/keepalived/sbin/keepalived /sbin/

[root@server1 etc]# ln -s /usr/local/keepalived/etc/keepalived/ /etc/

[root@server1 sysconfig]#

 ln -s /usr/local/keepalived/etc/sysconfig/keepalived /etc/sysconfig/

[root@server1 sysconfig]#

 ln -s /usr/local/keepalived/etc/rc.d/init.d/keepalived /etc/init.d/

[root@server1 init.d]# chmod +x keepalived

[root@server1 init.d]# cd /etc/keepalived/

[root@server1 keepalived]# ls

keepalived.conf  samples

[root@server1 keepalived]# vim keepalived.conf 

[root@server1 keepalived]# /etc/init.d/keepalived start

將修改的配置文件發送到server4同位置

Server4上的操作

[root@server4 keepalived]#

 ln -s /usr/local/keepalived/sbin/keepalived /sbin/

[root@server4 keepalived]#

 ln -s /usr/local/keepalived/etc/rc.d/init.d/keepalived /etc/init.d

[root@server4 keepalived]#

 chmod +x /usr/local/keepalived/etc/rc.d/init.d/keepalived

[root@server4 keepalived]#

 ln -s /usr/local/keepalived/etc/sysconfig/keepalived /

etc/sysconfig/

[root@server4 keepalived]# /etc/init.d/keepalived start

[root@server4 keepalived]# mkdir /etc/keepalived/

將文件中的server1改為server4，state改為backup，

兩者的virtual_router_id一定不同，server4的priority值小于server1的值

將keepalived進行重啟

測試：