溫馨提示×

溫馨提示×

您好,登錄后才能下訂單哦!

密碼登錄×
登錄注冊×
其他方式登錄
點擊 登錄注冊 即表示同意《億速云用戶服務條款》

SAIL-AM335x中wifi作為熱點后,其他設備通過該wifi熱點,可以訪問外部網絡的方法

發布時間:2020-07-06 03:35:06 來源:網絡 閱讀:211 作者:電魚電子 欄目:系統運維

今天與大家分享的是sail-am335x中wifi作為熱點后,其他設備通過該wifi熱點,訪問外部網絡的方法,具體的方法步驟如下:

1.335x前邊已經移植好了hostapd;直接使用就可以熱點名為rtwap,密碼為87654321

2.dhcpd 配置文件修改

創建空文件/var/db/dhcpd.leases

mkdir -p /var/db

touch /var/db/dhcpd.leases

3.ifconfig eth0 up

udhcpc -i eth0

ifconfig wlan0 up

ifconfig wlan0 10.5.5.1 netmask 255.255.255.0

echo 1 >/proc/sys/net/ipv4/ip_forward /打開IP轉發/

/sbin/iptables -t nat -A POSTROUTING -oeth0 -j MASQUERADE

設置網卡的混雜模式

ifconfig wlan0 promisc

[ 3725.324000] device wlan0 enteredpromiscuous mode

dhcpd -cf /etc/dhcpd.conf wlan0 &

hostapd /etc/hostapd.conf -B

4.前邊命令中需要用到iptables,文件系統中需要移植iptables (iptables編譯)

./configure --host=arm-arago-linux-gnueabi--prefix=/root/335x/localcode/iptables/install --disable-nftables--with-ksource=/root/335x/localcode/kernel-3.2.0 --enable-static --disable-shared

make

make install

編譯完成后需要將iptables移植到開發板上;

內核中也需要配置iptables的支持

[*] Networking support --->

  Networking options  --->

          [*] Network packet filteringframework (Netfilter)  --->

                 Core NetfilterConfiguration  --->(全部選上)

                 IP: NetfilterConfiguration  --->(全部選上)

c??~YM?L:? 335x中wifi作為熱點后,其他設備通過該wifi熱點,可以訪問外部網絡的方法

1.335x前邊已經移植好了hostapd;直接使用就可以熱點名為rtwap,密碼為87654321

2.dhcpd 配置文件修改

創建空文件/var/db/dhcpd.leases

mkdir -p /var/db

touch /var/db/dhcpd.leases

3.

ifconfig eth0 up

udhcpc -i eth0

ifconfig wlan0 up

ifconfig wlan0 10.5.5.1 netmask 255.255.255.0

echo 1 >/proc/sys/net/ipv4/ip_forward /打開IP轉發/

/sbin/iptables -t nat -A POSTROUTING -oeth0 -j MASQUERADE

設置網卡的混雜模式

ifconfig wlan0 promisc

[ 3725.324000] device wlan0 enteredpromiscuous mode

dhcpd -cf /etc/dhcpd.conf wlan0 &

hostapd /etc/hostapd.conf -B

4.前邊命令中需要用到iptables,文件系統中需要移植iptables (iptables編譯)

./configure --host=arm-arago-linux-gnueabi--prefix=/root/335x/localcode/iptables/install --disable-nftables--with-ksource=/root/335x/localcode/kernel-3.2.0 --enable-static --disable-shared

make

make install

編譯完成后需要將iptables移植到開發板上;

內核中也需要配置iptables的支持

[*] Networking support --->

  Networking options  --->

          [*] Network packet filteringframework (Netfilter)  --->

                 Core NetfilterConfiguration  --->(全部選上)

                 IP: NetfilterConfiguration  --->(全部選上)

以上步驟是基于電魚電子的sail-am335開發板為例來實現的。

這樣通過這幾個小步驟以后,其他設備通過該wifi熱點,可以成功連接到外部網絡啦~

向AI問一下細節

免責聲明:本站發布的內容(圖片、視頻和文字)以原創、轉載和分享為主,文章觀點不代表本網站立場,如果涉及侵權請聯系站長郵箱:is@yisu.com進行舉報,并提供相關證據,一經查實,將立刻刪除涉嫌侵權內容。

AI