溫馨提示×
您好，登錄后才能下訂單哦！
點擊 登錄注冊 即表示同意《億速云用戶服務條款》
您好，登錄后才能下訂單哦！
怎么在Linux中實現雙網卡綁定腳本？相信很多沒有經驗的人對此束手無策，為此本文總結了問題出現的原因和解決方法，通過這篇文章希望你能解決這個問題。
1.適用范圍
該shell腳本可在以下linux系統創建多個綁定網卡，用于生產環境沒問題的：
Redhat 5.x
CentOS 5.x
Kylin 3.x
KUX 2.x
2.腳本特點
---------------------------------------------- ------ Network Configuration Assistant ------ ---------------------------------------------- The information you have entered: First NIC :eth0 Second NIC :eth2 bond name :bond1 IP address :192.168.56.11 netmask :255.255.255.0 bonding_mode :mode=1 primary NIC :none ---------------------------------------------- Pls make sure its OK[y/n]:y
如上，腳本在使用過程中，會依次提示輸入需要綁定的子網卡名稱、綁定網卡名稱、IP地址和子網掩碼、綁定模式、是否指定主網卡，并主動對系統中可用網卡進行識別并列出，供用戶選擇，同時會判斷輸入的各項信息的正確性，保障雙網卡綁定順利進行。
3.使用說明
首先將腳本上傳至linux系統任意目錄下，使用root用戶執行：
[root@node1 tmp]# sh bonding_v2.0.sh ---------------------------------------------- ------ Network Configuration Assistant ------ ---------------------------------------------- 4 network cards available: eth0 eth2 eth3 eth4 ---------------------------------------------- Please enter the First NIC:_
首先腳本會列出系統中有多少可用網卡，并提示輸入需要綁定的第一塊子網卡的名稱，這里輸入eth3。
無需擔心輸入錯誤，輸入重復等問題，腳本會自動判斷你的輸入信息是否正確。
---------------------------------------------- ------ Network Configuration Assistant ------ ---------------------------------------------- 4 network cards available: eth0 eth2 eth3 eth4 The information you have entered: First NIC : eth3 ---------------------------------------------- Please select the second NIC:_
接著輸入需要綁定的第二塊網卡的名稱eth4，如果輸入錯誤會出現相應的提示，比如錯輸入為eth8，會提示需要重新輸入：
---------------------------------------------- ------ Network Configuration Assistant ------ ---------------------------------------------- 4 network cards available: eth0 eth2 eth3 eth4 The information you have entered: First NIC : eth3 ---------------------------------------------- eth8 is not available,Please enter another one. Please select the second NIC:_
正確輸入需要綁定的第二塊網卡eth4后，如果linux系統中之前不存在綁定網卡，則默認第一個綁定網卡的名稱為bond0，如果系統中存在綁定網卡，腳本會提示輸入bondN(N為數字)：
---------------------------------------------- ------ Network Configuration Assistant ------ ---------------------------------------------- The information you have entered: First NIC : eth3 Second NIC : eth4 bond name : bond0 ---------------------------------------------- The default first bond name is -- bond0. Please enter an IP address:_
按照提示輸入需要綁定的IP地址，比如10.1.1.1
腳本會自動判斷輸入的IP地址格式和范圍是否正確，無需擔心輸入錯誤
---------------------------------------------- ------ Network Configuration Assistant ------ ---------------------------------------------- The information you have entered: First NIC : eth3 Second NIC : eth4 bond name : bond0 IP address : 10.1.1.1 ---------------------------------------------- Pls enter the NETMASK[255.255.255.0]:_
輸入IP地址后，會提示輸入子網掩碼，默認為255.255.255.0，直接回車即可，也可以輸入自定義的子網掩碼。
---------------------------------------------- ------ Network Configuration Assistant ------ ---------------------------------------------- The information you have entered: First NIC : eth3 Second NIC : eth4 bond name : bond0 IP address : 10.1.1.1 netmask : 255.255.255.0 ---------------------------------------------- Pls enter the bonding_mode[default:mode=1,active-backup]:_
這一步是輸入網卡綁定級別，默認使用主備模式：mode=1，直接回車即可，也可以輸入自定義的綁定級別（如輸入 mode=6），格式為：
mode=｛0,1,2,3,4,5,6｝ ---------------------------------------------- ------ Network Configuration Assistant ------ ---------------------------------------------- The information you have entered: First NIC :eth3 Second NIC :eth4 bond name :bond0 IP address :10.1.1.1 netmask :255.255.255.0 bonding_mode :mode=1 ---------------------------------------------- 1-eth3 2-eth4 3-none choose whether to set up the primary NIC or not[default:3-none]:_
此時腳本提示是否設置primary網卡，primary網卡的作用是在子網卡均正常時，primary網卡優先處于活動狀態，這里默認為不設置primary網卡，也可以輸入數字1或2選擇一個網卡為primary網卡。
---------------------------------------------- ------ Network Configuration Assistant ------ ---------------------------------------------- The information you have entered: First NIC :eth3 Second NIC :eth4 bond name :bond0 IP address :10.1.1.1 netmask :255.255.255.0 bonding_mode :mode=1 primary NIC :none ---------------------------------------------- Pls make sure its OK[y/n]:_
至此，所有信息輸入完畢，腳本會讓您判斷輸入的所有信息是否正確，正確則輸入y，進行下一步操作，否則輸入n，重新輸入以上信息。
---------------------------------------------- ------ Network Configuration Assistant ------ ---------------------------------------------- Complete! File backup directory: /etc/sysconfig/network-scripts/inspur_bak you can check the file and then restart the network service. 1 ) service network restart 2 ) exit ---------------------------------------------- Please make your choice:_
看到這里時，所有綁定網卡的配置文件已經修改完畢了，輸入1重啟網絡服務；輸入2直接退出腳本。
建議選擇重啟網絡服務，如果直接退出腳本而不重啟網絡服務，修改的配置文件是不會生效的，并且在使用該腳本創建下一個綁定網卡時顯示信息會出現異常(因?yàn)槟_本通過ifconfig命令獲取當前網卡信息)。
you can check the file and then restart the network service. 1 ) service network restart 2 ) exit ---------------------------------------------- Please make your choice:1 正在關閉接口 eth0： [確定] 正在關閉接口 eth2： [確定] 正在關閉接口 eth3： [確定] 正在關閉接口 eth4： [確定] 關閉環回接口： [確定] 彈出環回接口： [確定] 彈出界面 bond0： RTNETLINK answers: File exists 在 bond0 添加地址 10.1.1.1 時出錯。 [確定] 彈出界面 eth0： [確定] 彈出界面 eth2： [確定]
第一次重啟網絡服務時可能會出現以上類似報錯，無需擔心，其實配置已經完成，再次重啟網絡服務即恢復正常。
在綁定過程中修改的配置文件如下：
[root@node1 tmp]# cd /etc/sysconfig/network-scripts/ [root@node1 network-scripts]# cat ifcfg-bond0 DEVICE=bond0 BOOTPROTO=none ONBOOT=yes TYPE=Ethernet USERCTL=no IPV6INIT=no PEERDNS=yes IPADDR=10.1.1.1 NETMASK=255.255.255.0 BONDING_OPTS="miimon=100 mode=1" [root@node1 network-scripts]# cat ifcfg-eth3 DEVICE=eth3 BOOTPROTO=none #HWADDR=08:00:27:41:b4:16 ONBOOT=yes TYPE=Ethernet USERCTL=no IPV6INIT=no PEERDNS=yes SLAVE=yes MASTER=bond0 [root@node1 network-scripts]# cat ifcfg-eth4 DEVICE=eth4 BOOTPROTO=none #HWADDR=08:00:27:6c:3d:0c ONBOOT=yes TYPE=Ethernet USERCTL=no IPV6INIT=no PEERDNS=yes SLAVE=yes MASTER=bond0 [root@node1 network-scripts]# cat /etc/modprobe.conf alias scsi_hostadapter ata_piix alias scsi_hostadapter1 ahci alias net-pf-10 off alias ipv6 off options ipv6 disable=1 alias snd-card-0 snd-intel8x0 options snd-card-0 index=0 options snd-intel8x0 index=0 remove snd-intel8x0 { /usr/sbin/alsactl store 0 >/dev/null 2>&1 || : ; }; /sbin/modprobe -r --ignore-remove snd-intel8x0 alias eth0 e1000 alias eth2 e1000 alias eth3 e1000 alias eth4 e1000 alias bond0 bonding
網絡配置信息如下：
[root@node1 tmp]# ifconfig bond0 Link encap:Ethernet HWaddr 08:00:27:41:B4:16 inet addr:10.1.1.1 Bcast:10.1.1.255 Mask:255.255.255.0 UP BROADCAST RUNNING MASTER MULTICAST MTU:1500 Metric:1 RX packets:1197 errors:0 dropped:0 overruns:0 frame:0 TX packets:125 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:106338 (103.8 KiB) TX bytes:16662 (16.2 KiB) eth0 Link encap:Ethernet HWaddr 08:00:27:35:B4:81 inet addr:192.168.56.11 Bcast:192.168.56.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:1487 errors:0 dropped:0 overruns:0 frame:0 TX packets:1190 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:146576 (143.1 KiB) TX bytes:151787 (148.2 KiB) eth2 Link encap:Ethernet HWaddr 08:00:27:72:08:46 inet addr:10.1.1.11 Bcast:10.1.1.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:193 errors:0 dropped:0 overruns:0 frame:0 TX packets:455 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:31434 (30.6 KiB) TX bytes:22657 (22.1 KiB) eth3 Link encap:Ethernet HWaddr 08:00:27:41:B4:16 UP BROADCAST RUNNING SLAVE MULTICAST MTU:1500 Metric:1 RX packets:591 errors:0 dropped:0 overruns:0 frame:0 TX packets:93 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:55217 (53.9 KiB) TX bytes:10511 (10.2 KiB) eth4 Link encap:Ethernet HWaddr 08:00:27:41:B4:16 UP BROADCAST RUNNING SLAVE MULTICAST MTU:1500 Metric:1 RX packets:606 errors:0 dropped:0 overruns:0 frame:0 TX packets:32 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:51121 (49.9 KiB) TX bytes:6151 (6.0 KiB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:3297 errors:0 dropped:0 overruns:0 frame:0 TX packets:3297 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:4725726 (4.5 MiB) TX bytes:4725726 (4.5 MiB)
雙網卡綁定信息：
[root@node1 tmp]# cat /proc/net/bonding/bond0 Ethernet Channel Bonding Driver: v3.4.0-2 (October 7, 2008) Bonding Mode: fault-tolerance (active-backup) Primary Slave: None Currently Active Slave: eth3 MII Status: up MII Polling Interval (ms): 100 Up Delay (ms): 0 Down Delay (ms): 0 Slave Interface: eth3 MII Status: up Speed: 1000 Mbps Duplex: full Link Failure Count: 0 Permanent HW addr: 08:00:27:41:b4:16 Slave Interface: eth4 MII Status: up Speed: 1000 Mbps Duplex: full Link Failure Count: 0 Permanent HW addr: 08:00:27:6c:3d:0c
4.腳本代碼
#!/bin/bash
# Date:2018-11-26 14:28:45
# Author:ZhangJian
# Mail:1037509307@qq.com
# Func:Configure Network Bonding
# Version:2.0
#V1.6版本更新:不再將綁定的模式mode=x寫入modprobe.conf文件，將其寫入ifcfg-bond中，因?yàn)樵趍odprobe.conf文件中時，修改了mode模式后，重啟網絡服務可能不生效。
#V2.0版本更新:將primary網卡設置為可選擇項。
trap "tput clear;tput cup 3;echo 'Any Questions: Send a message to QQ 1037509307.';tput cup 6;exit" 2 3
if [[ -n $1 ]]; then
cat <<EOF
Network Configuration Assistant
--- Configure Network Bonding v1.5
Usage:
sh $0
chmod +x $0 && ./$0
EOF
exit 0
fi
if [[ $UID -ne 0 ]]; then
tput clear
tput cup 6 20
echo -e "You must use the user: \033[31mROOT\033[0m"
tput cup 10
exit
fi
ERROR(){
tput cup $1 $2;tput ed
echo 'Input error,Try again pls.'
echo -e 'Press ENTER to continue..._\b\c'
read inputA
}
Check_BakFile(){
#文件備份函數
#使用方法：
#Check_BakFile 要備份的文件名 備份目錄 -x(按什么時間格式備份)
case ${3} in
-d ) #按天備份
Bak_Date=`date '+%Y-%m-%d'`
;;
-H ) #按小時備份
Bak_Date=`date '+%Y-%m-%d_%H'`
;;
-M ) #按分鐘備份
Bak_Date=`date '+%Y-%m-%d_%H:%M'`
;;
-m ) #按月備份
Bak_Date=`date '+%Y-%m'`
;;
-Y ) #按年備份
Bak_Date=`date '+%Y'`
;;
* ) #默認按分鐘備份
Bak_Date=`date '+%Y-%m-%d_%H:%M'`
;;
esac
#Bak_Date=`date '+%Y-%m-%d-%H:%M'`
[[ -d ${2}/${Bak_Date} ]] || mkdir -p ${2}/${Bak_Date}
cp -ra ${1} ${2}/${Bak_Date}
}
bonding_pre(){
#雙網卡綁定前導函數，判定網卡、IP等合法性并引導用戶正確輸入?yún)?shù)。
#全部真實網卡
NIC_NAME_all=`ifconfig -a | awk '/\<Ethernet\>/ {print $1}' | grep -wEv '^bond[0-9]+'`
#已經存在的綁定網卡
NIC_NAME_bond=`ifconfig -a | awk '/^\<bond[0-9]+\>/ {print $1}'`
#打印出已經是SLAVE的網卡
NIC_NAME_slave=`ifconfig -a | sed -n '/SLAVE/{g;1!p;};h' | awk '{print $1}'`
NIC_NAME_slave=${NIC_NAME_slave:=NULL}
#打印出可用網卡
NIC_NAME_free=`echo "$NIC_NAME_all" | grep -Fwv "$NIC_NAME_slave"`
#可用網卡數量
NIC_NAME_free_nu=`echo "$NIC_NAME_free" | wc -w`
declare -a NIC_LIST
NIC_LIST=($NIC_NAME_free)
info_print(){
tput clear;tput cup 2
cat <<EOF
----------------------------------------------
------ Network Configuration Assistant ------
----------------------------------------------
EOF
tput cup 7
if [[ -n ${1} ]]; then
echo -e "Already existing Channel Bonding Interface of the system:\n\033[31m${1}\033[0m\n"
fi
}
if [[ "$NIC_NAME_free_nu" -gt 1 ]]; then
info_print
echo -e "\033[031m$NIC_NAME_free_nu\033[0m network cards available:"
echo -e "\033[31m${NIC_LIST[@]}\033[0m"
echo -e "----------------------------------------------\n"
#輸入第一塊網卡的名稱
while true; do
echo -e "\nPlease enter the First NIC:_\b\c"
read NIC1
echo ${NIC_LIST[@]} | grep -Fw "$NIC1" &> /dev/null
if [[ $? -eq 0 ]]; then
info_print
echo -e "\033[031m$NIC_NAME_free_nu\033[0m network cards available:\n\033[31m${NIC_LIST[@]}\033[0m"
echo -e "\nThe information you have entered:\nFirst NIC : $NIC1"
echo -e "----------------------------------------------\n"
break
else
info_print
echo -e "\033[031m$NIC_NAME_free_nu\033[0m network cards available:\n\033[31m${NIC_LIST[@]}\033[0m"
echo -e "----------------------------------------------\n"
echo -e "\033[31m${NIC1}\033[0m is not available,Please enter another one."
fi
done
#輸入第二塊網卡的名稱
while true; do
echo -e "\nPlease select the second NIC:_\b\c"
read NIC2
if [[ ${NIC1} != ${NIC2} ]]; then
echo ${NIC_LIST[@]} | grep -Fw "${NIC2}" &> /dev/null
if [[ $? -eq 0 ]]; then
info_print "${NIC_NAME_bond}"
echo -e "The information you have entered:\nFirst NIC : ${NIC1}\nSecond NIC : ${NIC2}"
echo -e "----------------------------------------------\n"
break
else
info_print
echo -e "\033[031m$NIC_NAME_free_nu\033[0m network cards available:\n\033[31m${NIC_LIST[@]}\033[0m\n\nThe information you have entered:\nFirst NIC : ${NIC1}"
echo -e "----------------------------------------------\n"
echo -e "\033[31m${NIC2}\033[0m is not available,Please enter another one."
fi
else
info_print
echo -e "\033[031m${NIC_NAME_free_nu}\033[0m network cards available:\n\033[31m${NIC_LIST[@]}\033[0m\n\nThe information you have entered:\nFirst NIC : ${NIC1}"
echo -e "----------------------------------------------\n"
echo -e "\033[31m${NIC2}\033[0m is the first NIC,Please enter another one."
fi
done
#輸入綁定網卡名稱并進行合理性檢查
if [[ -z ${NIC_NAME_bond} ]]; then
NAME_bond=bond0
info_print
echo -e "The information you have entered:\nFirst NIC : ${NIC1}\nSecond NIC : ${NIC2}\nbond name : ${NAME_bond}"
echo -e "----------------------------------------------\n"
echo "The default first bond name is -- bond0."
else
while true; do
echo -e "\nPlease enter a bond name[bonN]:_\b\c"
read NAME_bond
#檢查輸入格式是否為bond+數字的格式。
echo "${NAME_bond}" | grep -wE '^bond[[:digit:]]+$' &> /dev/null
if [[ $? -eq 0 ]]; then
echo "${NIC_NAME_bond}" | grep -Fw "${NAME_bond}" &> /dev/null
if [[ $? -ne 0 ]]; then
info_print "${NIC_NAME_bond}"
echo -e "The information you have entered:\nFirst NIC : ${NIC1}\nSecond NIC : ${NIC2}\nbond name : ${NAME_bond}"
echo -e "----------------------------------------------\n"
break
else
info_print "${NIC_NAME_bond}"
echo -e "The information you have entered:\nFirst NIC : ${NIC1}\nSecond NIC : ${NIC2}"
echo -e "----------------------------------------------\n"
echo "You can not use an existing name: ${NAME_bond}"
echo -e "\033[31m${NAME_bond}\033[0m is not available,Please enter another one like -- bondN."
fi
else
info_print "${NIC_NAME_bond}"
echo -e "The information you have entered:\nFirst NIC : ${NIC1}\nSecond NIC : ${NIC2}"
echo -e "----------------------------------------------\n"
echo -e "\033[31m${NAME_bond}\033[0m is not available,Please enter another one like -- bondN."
fi
done
fi
#設置IP地址
while true; do
echo -e "\nPlease enter an IP address:_\b\c"
read IP_bond
echo "${IP_bond}" | grep -owE '^(([1-9]|[1-9][0-9]|1[0-9]{2}|2[0-5]{2})\.){3}([1-9]|[1-9][0-9]|1[0-9]{2}|2[0-5]{2})$' &> /dev/null
if [[ $? -eq 0 ]]; then
info_print
echo -e "The information you have entered:\nFirst NIC : ${NIC1}\nSecond NIC : ${NIC2}\nbond name : ${NAME_bond}\nIP address : ${IP_bond}"
echo -e "----------------------------------------------\n"
break
else
info_print
echo -e "The information you have entered:\nFirst NIC : ${NIC1}\nSecond NIC : ${NIC2}\nbond name : ${NAME_bond}"
echo -e "----------------------------------------------\n"
echo -e "IP address: \033[31m${IP_bond}\033[0m format errors, please re-enter."
fi
done
#設置netmask
while true; do
echo -e "\nPls enter the NETMASK[255.255.255.0]:_\b\c"
read NETMASK_bond
NETMASK_bond=${NETMASK_bond:="255.255.255.0"} #當變量為NETMASK_bond為空時，給其賦默認值255.255.255.0
echo "$NETMASK_bond" | grep -owE '^(128|192|224|240|248|252|254|255)\.((0|128|192|224|240|248|252|254|255)\.){2}(0|128|192|224|240|248|252|254|255)$' &> /dev/null
if [[ $? -eq 0 ]]; then
info_print
echo -e "The information you have entered:\nFirst NIC : ${NIC1}\nSecond NIC : ${NIC2}\nbond name : ${NAME_bond}\nIP address : ${IP_bond}\nnetmask : ${NETMASK_bond}"
echo -e "----------------------------------------------\n"
break
else
info_print
echo -e "The information you have entered:\nFirst NIC : ${NIC1}\nSecond NIC : ${NIC2}\nbond name : ${NAME_bond}\nIP address : ${IP_bond}"
echo -e "----------------------------------------------\n"
echo -e "Input error.\nPlease enter the correct NETMASK or press ENTER to use 255.255.255.0.\n"
fi
done
#:<<!zhushi! #批量注釋，如果開啟批量注釋，默認mode=1
while true; do
echo -e "\nPls enter the bonding_mode[default:mode=1,active-backup]:_\b\c"
read mode_bond
mode_bond=${mode_bond:="mode=1"} #當變量為mode_bond為空時，給其賦默認值1
if [[ ! ${mode_bond} =~ "mode=[0-6]" ]]; then
info_print
echo -e "The information you have entered:\nFirst NIC : ${NIC1}\nSecond NIC : ${NIC2}\nbond name : ${NAME_bond}\nIP address : ${IP_bond}\netmask : ${NETMASK_bond}"
echo -e "----------------------------------------------\n"
echo "Invalid answer: ${mode_bond}"
echo "Eg: mode={0,1,2,3,4,5,6}"
else
info_print
echo -e "The information you have entered:\n"
echo -e "First NIC :${NIC1}\nSecond NIC :${NIC2}\nbond name :${NAME_bond}\nIP address :${IP_bond}\nnetmask :${NETMASK_bond}\nbonding_mode :${mode_bond}"
echo -e "----------------------------------------------\n"
break
fi
done
#!zhushi!
#選擇是否設置primary網卡
while true; do
echo "1-${NIC1}"
echo "2-${NIC2}"
echo "3-none"
echo -e "choose whether to set up the primary NIC or not[default:3-none]:_\b\c"
read get_primary_NIC
get_primary_NIC=${get_primary_NIC:="none"}
case ${get_primary_NIC} in
1 )
get_primary_NIC=${NIC1}
#echo "--$get_primary_NIC"
break
;;
2 )
get_primary_NIC=${NIC2}
#echo "--$get_primary_NIC"
break
;;
3 )
get_primary_NIC=none
#echo "--$get_primary_NIC"
break
;;
none )
break
;;
* )
#echo "--$get_primary_NIC"
info_print
echo -e "The information you have entered:\nFirst NIC : ${NIC1}\nSecond NIC : ${NIC2}\nbond name : ${NAME_bond}\nIP address : ${IP_bond}\nnetmask : ${NETMASK_bond}"
echo -e "----------------------------------------------\n"
echo "Invalid answer: ${get_primary_NIC}"
echo "Pls input a number in {1,2,3} or press ENTER to set up primary NIC none."
continue
;;
esac
info_print
echo -e "The information you have entered:\n"
echo -e "First NIC :${NIC1}\nSecond NIC :${NIC2}\nbond name :${NAME_bond}\nIP address :${IP_bond}\nnetmask :${NETMASK_bond}\nbonding_mode :${mode_bond}\nprimary NIC :${get_primary_NIC}"
echo -e "----------------------------------------------\n"
break
done
#最終輸入信息確認
while true; do
info_print
echo -e "The information you have entered:\n"
echo -e "\033[31mFirst NIC :${NIC1}\nSecond NIC :${NIC2}\nbond name :${NAME_bond}\nIP address :${IP_bond}\nnetmask :${NETMASK_bond}\nbonding_mode :${mode_bond}\nprimary NIC :${get_primary_NIC}\033[0m"
echo -e "----------------------------------------------\n"
echo -e "Pls make sure its OK[y/n]:_\b\c"
read input
case ${input} in
[Yy]|[Yy][Ee][Ss] )
bonding "$NIC1" "$NIC2" "$NAME_bond" "$IP_bond" "$NETMASK_bond"
break
;;
[Nn]|[Nn][Oo] )
bonding_pre
;;
* )
tput cup 7;tput ed
ERROR 7 10
;;
esac
done
else
info_print
echo -e "You have \033[031m${NIC_NAME_free_nu}\033[0m network cards available:\n"
#將重點顯示的“網卡名”標示為紅色
echo -e "\033[31m${NIC_LIST[@]}\033[0m\n"
echo -e "There are \033[31mnot enough\033[0m network cards to make bonding"
echo -e "Pls check it......\n"
echo -e 'Press ENTER to exit..._\b\c'
read answer
exit 1
fi
}
bonding(){
if [[ $# -lt 5 ]]
then
echo 'Bonding failed! Please provide enough information!'
echo -e "\nUsage:\n sh bonding.sh <NIC1_name> <NIC2_name> <bond_name> <IP> <NETMASK>\n\n"
exit 1
fi
#get device name and ip information
SLAVE1_DEV="$1" #SLAVE1_DEV=ethx
SLAVE2_DEV="$2" #SLAVE2_DEV=ethx
BOND_DEV="$3" #BOND_DEV=bondx
SLAVE1=ifcfg-"$1"
SLAVE2=ifcfg-"$2"
BOND=ifcfg-"$3"
BOND_IPADDR="$4"
BOND_NETMASK="$5"
BOND_DIR=/etc/sysconfig/network-scripts
if [ -e $BOND_DIR/$BOND ]
then
echo $BOND_DIR/$BOND is already exist
else
#file backup
Check_BakFile "${BOND_DIR}/ifcfg-*" "${BOND_DIR}/inspur_bak" "-M"
#get mac address
SLAVE1_MAC=`grep 'HWADDR' ${BOND_DIR}/${SLAVE1}`
SLAVE2_MAC=`grep 'HWADDR' ${BOND_DIR}/${SLAVE2}`
# modify $BOND
touch $BOND_DIR/$BOND
echo "DEVICE=${BOND_DEV}" >> $BOND_DIR/$BOND
echo "BOOTPROTO=none" >> $BOND_DIR/$BOND
echo "ONBOOT=yes" >> $BOND_DIR/$BOND
echo "TYPE=Ethernet" >> $BOND_DIR/$BOND
echo "USERCTL=no" >> $BOND_DIR/$BOND
echo "IPV6INIT=no" >> $BOND_DIR/$BOND
echo "PEERDNS=yes" >> $BOND_DIR/$BOND
echo "IPADDR=${BOND_IPADDR}" >> $BOND_DIR/$BOND
echo "NETMASK=${BOND_NETMASK}" >> $BOND_DIR/$BOND
if [[ ${get_primary_NIC} == none ]]; then
echo "BONDING_OPTS=\"miimon=100 ${mode_bond}\"" >> $BOND_DIR/$BOND
else
echo "BONDING_OPTS=\"miimon=100 ${mode_bond} primary=$(echo ${SLAVE1} | cut -d'-' -f2)\"" >> $BOND_DIR/$BOND
fi
# modify $SLAVE1
> $BOND_DIR/$SLAVE1
echo "DEVICE=${SLAVE1_DEV}" >> $BOND_DIR/$SLAVE1
echo 'BOOTPROTO=none' >> $BOND_DIR/$SLAVE1
#cat $BOND_DIR/../ifcfg-bak/$SLAVE1 |grep HWADDR >> $BOND_DIR/$SLAVE1
echo "#$SLAVE1_MAC" >> $BOND_DIR/$SLAVE1
echo ONBOOT=yes >> $BOND_DIR/$SLAVE1
echo TYPE=Ethernet >> $BOND_DIR/$SLAVE1
echo USERCTL=no >> $BOND_DIR/$SLAVE1
echo IPV6INIT=no >> $BOND_DIR/$SLAVE1
echo PEERDNS=yes >> $BOND_DIR/$SLAVE1
echo SLAVE=yes >> $BOND_DIR/$SLAVE1
echo MASTER=$BOND_DEV >> $BOND_DIR/$SLAVE1
# modify SLAVE2
> $BOND_DIR/$SLAVE2
echo "DEVICE=$SLAVE2_DEV" >> $BOND_DIR/$SLAVE2
echo BOOTPROTO=none >> $BOND_DIR/$SLAVE2
#cat $BOND_DIR/../ifcfg-bak/$SLAVE2 |grep HWADDR >> $BOND_DIR/$SLAVE2
echo "#$SLAVE2_MAC" >> $BOND_DIR/$SLAVE2
echo ONBOOT=yes >> $BOND_DIR/$SLAVE2
echo TYPE=Ethernet >> $BOND_DIR/$SLAVE2
echo USERCTL=no >> $BOND_DIR/$SLAVE2
echo IPV6INIT=no >> $BOND_DIR/$SLAVE2
echo PEERDNS=yes >> $BOND_DIR/$SLAVE2
echo SLAVE=yes >> $BOND_DIR/$SLAVE2
echo MASTER=$BOND_DEV >> $BOND_DIR/$SLAVE2
[[ -e /etc/modprobe.conf.bak ]] && cp /etc/modprobe.conf /etc/modprobe.conf.bak.new || cp /etc/modprobe.conf /etc/modprobe.conf.bak
echo "alias $BOND_DEV bonding" >> /etc/modprobe.conf
while true; do
tput clear;tput cup 2
cat <<EOF
----------------------------------------------
------ Network Configuration Assistant ------
----------------------------------------------
Complete!
File backup directory: ${BOND_DIR}/inspur_bak
you can check the file and then restart the network service.
1 ) service network restart
2 ) exit
----------------------------------------------
EOF
echo -e "Please make your choice:_\b\c"
read answer
case ${answer} in
1 )
service network restart
exit 0
;;
2 )
exit 0
;;
esac
done
fi
}
main(){
while true; do
bonding_pre
done
}Linux是一種免費使用和自由傳播的類UNIX操作系統，是一個基于POSIX的多用戶、多任務、支持多線程和多CPU的操作系統，使用Linux能運行主要的Unix工具軟件、應用程序和網絡協議。
看完上述內容，你們掌握怎么在Linux中實現雙網卡綁定腳本的方法了嗎？如果還想學到更多技能或想了解更多相關內容，歡迎關注億速云行業資訊頻道，感謝各位的閱讀！
免責聲明：本站發布的內容（圖片、視頻和文字）以原創、轉載和分享為主，文章觀點不代表本網站立場，如果涉及侵權請聯系站長郵箱：is@yisu.com進行舉報，并提供相關證據，一經查實，將立刻刪除涉嫌侵權內容。
億速云公眾號
手機網站二維碼