go語言有哪些環境變量

go語言有哪些環境變量？針對這個問題，今天小編總結這篇有關golang環境變量的文章，可供感興趣的小伙伴們參考借鑒，希望對大家有所幫助。

環境變量代表的含義：

$ go help environment
The go command and the tools it invokes consult environment variables
for configuration. If an environment variable is unset, the go command
uses a sensible default setting. To see the effective setting of the
variable <NAME>, run 'go env <NAME>'. To change the default setting,
run 'go env -w <NAME>=<VALUE>'. Defaults changed using 'go env -w'
are recorded in a Go environment configuration file stored in the
per-user configuration directory, as reported by os.UserConfigDir.
The location of the configuration file can be changed by setting
the environment variable GOENV, and 'go env GOENV' prints the
effective location, but 'go env -w' cannot change the default location.
See 'go help env' for details.

General-purpose environment variables:

        GCCGO
                The gccgo command to run for 'go build -compiler=gccgo'.
        GOARCH
                The architecture, or processor, for which to compile code.
                Examples are amd64, 386, arm, ppc64.
        GOBIN
                The directory where 'go install' will install a command.
        GOCACHE
                The directory where the go command will store cached
                information for reuse in future builds.
        GODEBUG
                Enable various debugging facilities. See 'go doc runtime'
                for details.
        GOENV
                The location of the Go environment configuration file.
                Cannot be set using 'go env -w'.
        GOFLAGS
                A space-separated list of -flag=value settings to apply
                to go commands by default, when the given flag is known by
                the current command. Each entry must be a standalone flag.
                Because the entries are space-separated, flag values must
                not contain spaces. Flags listed on the command line
                are applied after this list and therefore override it.
        GOOS
                The operating system for which to compile code.
                Examples are linux, darwin, windows, netbsd.
        GOPATH
                For more details see: 'go help gopath'.
        GOPROXY
                URL of Go module proxy. See 'go help modules'.
        GOPRIVATE, GONOPROXY, GONOSUMDB
                Comma-separated list of glob patterns (in the syntax of Go's path.Match)
                of module path prefixes that should always be fetched directly
                or that should not be compared against the checksum database.
                See 'go help module-private'.
        GOROOT
                The root of the go tree.
        GOSUMDB
                The name of checksum database to use and optionally its public key and
                URL. See 'go help module-auth'.
        GOTMPDIR
                The directory where the go command will write
                temporary source files, packages, and binaries.

Environment variables for use with cgo:

        AR
                The command to use to manipulate library archives when
                building with the gccgo compiler.
                The default is 'ar'.
        CC
                The command to use to compile C code.
        CGO_ENABLED
                Whether the cgo command is supported. Either 0 or 1.
        CGO_CFLAGS
                Flags that cgo will pass to the compiler when compiling
                C code.
        CGO_CFLAGS_ALLOW
                A regular expression specifying additional flags to allow
                to appear in #cgo CFLAGS source code directives.
                Does not apply to the CGO_CFLAGS environment variable.
        CGO_CFLAGS_DISALLOW
                A regular expression specifying flags that must be disallowed
                from appearing in #cgo CFLAGS source code directives.
                Does not apply to the CGO_CFLAGS environment variable.
        CGO_CPPFLAGS, CGO_CPPFLAGS_ALLOW, CGO_CPPFLAGS_DISALLOW
                Like CGO_CFLAGS, CGO_CFLAGS_ALLOW, and CGO_CFLAGS_DISALLOW,
                but for the C preprocessor.
        CGO_CXXFLAGS, CGO_CXXFLAGS_ALLOW, CGO_CXXFLAGS_DISALLOW
                Like CGO_CFLAGS, CGO_CFLAGS_ALLOW, and CGO_CFLAGS_DISALLOW,
                but for the C++ compiler.
        CGO_FFLAGS, CGO_FFLAGS_ALLOW, CGO_FFLAGS_DISALLOW
                Like CGO_CFLAGS, CGO_CFLAGS_ALLOW, and CGO_CFLAGS_DISALLOW,
                but for the Fortran compiler.
        CGO_LDFLAGS, CGO_LDFLAGS_ALLOW, CGO_LDFLAGS_DISALLOW
                Like CGO_CFLAGS, CGO_CFLAGS_ALLOW, and CGO_CFLAGS_DISALLOW,
                but for the linker.
        CXX
                The command to use to compile C++ code.
        FC
                The command to use to compile Fortran code.
        PKG_CONFIG
                Path to pkg-config tool.

Architecture-specific environment variables:

        GOARM
                For GOARCH=arm, the ARM architecture for which to compile.
                Valid values are 5, 6, 7.
        GO386
                For GOARCH=386, the floating point instruction set.
                Valid values are 387, sse2.
        GOMIPS
                For GOARCH=mips{,le}, whether to use floating point instructions.
                Valid values are hardfloat (default), softfloat.
        GOMIPS64
                For GOARCH=mips64{,le}, whether to use floating point instructions.
                Valid values are hardfloat (default), softfloat.
        GOWASM
                For GOARCH=wasm, comma-separated list of experimental WebAssembly features to use.
                Valid values are satconv, signext.

Special-purpose environment variables:

        GCCGOTOOLDIR
                If set, where to find gccgo tools, such as cgo.
                The default is based on how gccgo was configured.
        GOROOT_FINAL
                The root of the installed Go tree, when it is
                installed in a location other than where it is built.
                File names in stack traces are rewritten from GOROOT to
                GOROOT_FINAL.
        GO_EXTLINK_ENABLED
                Whether the linker should use external linking mode
                when using -linkmode=auto with code that uses cgo.
                Set to 0 to disable external linking mode, 1 to enable it.
        GIT_ALLOW_PROTOCOL
                Defined by Git. A colon-separated list of schemes that are allowed
                to be used with git fetch/clone. If set, any scheme not explicitly
                mentioned will be considered insecure by 'go get'.
                Because the variable is defined by Git, the default value cannot
                be set using 'go env -w'.

Additional information available from 'go env' but not read from the environment:

        GOEXE
                The executable file name suffix (".exe" on Windows, "" on other systems).
        GOGCCFLAGS
                A space-separated list of arguments supplied to the CC command.
        GOHOSTARCH
                The architecture (GOARCH) of the Go toolchain binaries.
        GOHOSTOS
                The operating system (GOOS) of the Go toolchain binaries.
        GOMOD
                The absolute path to the go.mod of the main module,
                or the empty string if not using modules.
        GOTOOLDIR
                The directory where the go tools (compile, cover, doc, etc...) are installed.

你可以使用以下命令查看你的go環境變量：

$ go env

接下來就來了解一下其他的環境變量。

GOARCH 和 GOOS

GOARCH ：cpu架構，386、amd64、arm等，在交叉編譯的時候設置，可以編譯不同平臺的包。
GOOS：平臺，linux、windows等，通常和GOARCH搭配使用。
這里貼一下在不同平臺下交叉編譯的命令：

Mac下編譯Linux, Windows平臺的64位可執行程序：
CGO_ENABLED=0 GOOS=linux GOARCH=amd64 go build test.go
CGO_ENABLED=0 GOOS=windows GOARCH=amd64 go build test.go

Linux下編譯Mac, Windows平臺的64位可執行程序：
CGO_ENABLED=0 GOOS=darwin GOARCH=amd64 go build test.go
CGO_ENABLED=0 GOOS=windows GOARCH=amd64 go build test.go

Windows下編譯Mac, Linux平臺的64位可執行程序：
SET CGO_ENABLED=0
SET GOOS=darwin
SET GOARCH=amd64
go build test.go
SET CGO_ENABLED=0
SET GOOS=linux
SET GOARCH=amd64
go build test.go

GOCACHE

這是go build產生的緩存，這可以加快編譯速度，我在GOCACHE打印出來的路徑下看到了一個README文件，它解釋了GOCACHE。

This directory holds cached build artifacts from the Go build system.
Run "go clean -cache" if the directory is getting too large.
See golang.org to learn more about Go.

可以使用"go clean -cache"命令清除編譯緩存。

GOENV

本地的go環境文件存儲位置，不可以用"go env -w"設置它。

以上就是golang環境變量的知識匯總，內容較為全面，小編相信有部分知識點可能是我們日常工作可能會見到或用到的。希望你能通過這篇文章學到更多知識。