溫馨提示×
您好，登錄后才能下訂單哦！
點擊 登錄注冊 即表示同意《億速云用戶服務條款》
您好，登錄后才能下訂單哦！
Q1. 用stat 函數替換圖4-3程序中的lstat 函數，如若命令行參數之一是符號鏈接，會發生什么變化？
改之前：
[root@clstore3 ~]# ./lstat /etc/passwd /etc /dev/log /dev/tty /dev/sr0 /dev/cdrom
/etc/passwd: regular
/etc: directory
/dev/log: socket
/dev/tty: character special
/dev/sr0: block special
/dev/cdrom: symbolic link
可以看出，lstat 把/dev/cdrom 當著軟鏈接去看。
現在我們把程序lstat 改為stat 之后，允許結果如下,可以看stat查看的是符號鏈接所引用的文件的信息。
結論：lstat 函數類似于stat,但當命名的文件是一個符號鏈接時，lstat返回該符號鏈接的有關信息，而不是有該符號鏈接引用的文件的信息。
[root@clstore3 ~]# ./stat /etc/passwd /etc /dev/log /dev/tty /dev/sr0 /dev/cdrom
/etc/passwd: regular
/etc: directory
/dev/log: socket
/dev/tty: character special
/dev/sr0: block special
/dev/cdrom: block special
#include "apue.h"
int
main(int argc, char *argv[])
{
int i;
struct stat buf;
char *ptr;
for ( i = 1; i < argc; i++) {
printf("%s: ", argv[i]);
if (stat(argv[i], &buf) < 0){ /* this need to change lstat from stae*/
err_ret("lstat error");
continue;
}
if ( S_ISREG(buf.st_mode))
ptr = "regular";
else if ( S_ISDIR(buf.st_mode))
ptr = "directory";
else if ( S_ISCHR(buf.st_mode))
ptr = "character special";
else if ( S_ISBLK(buf.st_mode))
ptr = "block special";
else if ( S_ISFIFO(buf.st_mode))
ptr = "fifo special";
else if ( S_ISLNK(buf.st_mode))
ptr = "symbolic link";
else if ( S_ISSOCK(buf.st_mode))
ptr = "socket";
else
ptr = "** unknow mode **";
printf("%s\n", ptr);
}
exit(0);
}
Q2.
如果文件模式創建屏蔽字是777（八進制），結果會怎樣？用shell 的umask 命令驗證該結果。
[root@clstore3 ~]# umask
0022
改為777后
[root@clstore3 ~]# umask 777
[root@clstore3 ~]# umask
0777
創建一個test3文件子后，只有root可以看，也不可以更改了。
[root@clstore3 ~]# vim test3.txt
[root@clstore3 ~]# ls -al test3.txt
----------. 1 root root 12 Nov 13 10:44 test3.txt
Q3.關閉一個你所有擁有的用戶的讀權限，將導致拒絕你訪問你自己的文件，對此進行驗證。
[root@clstore3 ~]# chmod 640 /home/zhangb/Makefile
[root@clstore3 ~]# ls -al /home/zhangb/Makefile
-rw-r-----. 1 root root 18709 May 22 17:32 /home/zhangb/Makefile
切換到用戶zhangb，由于用戶zhangb沒有該文件的讀權限，所以不能查看該文件。
[root@clstore3 ~]# su - zhangb
522868 $ ls -al Makefile
-rw-r-----. 1 root root 18709 May 22 17:32 Makefile
522868 $ less Makefile
Makefile: Permission denied
522868 $ whoami
522868
Q4，創建文件foo 和bar后，運行圖4-9的程序，將發生什么情況？
什么都沒有發生， 權限為沒有任何改變。
[root@clstore3 ~]# touch foo bar
[root@clstore3 ~]# ls -al foo bar
-rw-r--r--. 1 root root 0 Nov 13 11:34 bar
-rw-r--r--. 1 root root 0 Nov 13 11:34 foo
[root@clstore3 ~]# ./create_foobar
[root@clstore3 ~]# ls -al foo bar
-rw-r--r--. 1 root root 0 Nov 13 11:34 bar
-rw-r--r--. 1 root root 0 Nov 13 11:34 foo
###############################################################
[root@clstore3 ~]# cat create_foobar.c
#include "apue.h"
#include <fcntl.h>
#define RWRWRW (S_IRUSR|S_IWUSR|S_IRGRP|S_IWGRP|S_IROTH|S_IWOTH)
int
main(void)
{
umask(0);
if ( creat("foo",RWRWRW) < 0)
err_sys("create error for foo");
umask ( S_IRGRP | S_IWGRP | S_IROTH | S_IWOTH);
if (creat("bar", RWRWRW) < 0 )
err_sys("create error for bar");
exit(0);
}
Q4.5 4.12節中講到一個普通文件的大小可以是0，同時我們又知道st_size字段是為目錄或符號鏈接定義的，那么目錄和符號鏈接的長度可否為0？
A：對于普通文件，其文件長度可以是0，在開始讀寫這種文件是，將得到文件(end-of-file)指示。
對于目錄，文件長度通常是一個（16or512)的整倍數。
符號鏈接-文件長度是在文件名中的實際字節數。
[root@clstore3 /]# ls -al /dev/cdrom
lrwxrwxrwx. 1 root root 3 May 29 21:55 /dev/cdrom -> sr0
[root@clstore3 var]# ls -al mail
lrwxrwxrwx. 1 root root 10 Sep 15 2014 mail -> spool/mail
Q4.6,編寫一個類似cp1的程序，它復制包含空洞的文件，但不將字節0寫到輸入文件中去.
[root@clstore3 ~]# od -c file.hole
0000000 a b c d e f g h i j \0 \0 \0 \0 \0 \0
0000020 \0 \0 \0 \0 \0 \0 \0 \0 \0 \0 \0 \0 \0 \0 \0 \0
*
0040000 A B C D E F G H I J
0040012
[root@clstore3 ~]# od -c file.out
0000000 a b c d e f g h i j A B C D E F
0000020 G H I J
0000024
程序代碼部分
#include <stdio.h>
#include <stdlib.h>
/* this program is to copy a file ( ignore the hole part if there is a hole in it
* zhangbo 2015/11/13 */
int main ()
{
int c;
FILE *in, *out;
in = fopen("file.hole","r");
out = fopen("file.out","w");
c = fgetc(in);
while ( c != EOF )
{
/* this is to copy the file, if encounter file with a hole in it '\0', do nothing,
* otherwise, copy the content to file.out*/
if ( c != '\0')
fputc(c,out);
c = fgetc(in);
}
exit(0);
}
apue Note in output from the ls command in section 4.12 that the file core and core.copy have different access permission. If the umask value didn’t change between the creation of these two files. explain how the difference could have occurred. ?
Q4.8 when running program 4.5 we check the available disk space with the df(1) command. why didn’t we use the du(1) command.
du command reports that the amount of disk space used by the file. 512-byte blocks.
Df displays the amount of disk space available on the file system containing each file name argument.
Q4.9 In figure 4.20, we show the unlink function as modifying the changed-status time of the file itself. How can this happen?
The modification time indicates when the contents of the file were last modified.
The changed-status time indicates when the i-node of the file was last modified.
some operations the affect the i-node without changing the actual contents of the files:
change the file access permissions/user ID, and change the number of links and so on.
The unlink function changes the i-node contents of the file and it is for changed-status time.
test1 are the hard link to test.txt,我們可以看到在unlink test1.txt 后,test.txt 的changed-status time 變成了16:59, 證明unlink 更改了i-node里的信息link減1，導致最后的changed-status 變成了最新的
zhangbodeMacBook-Pro:script zhangbo$ ls -lc test*
-rw-r--r-- 3 zhangbo staff 12 11 16 16:49 test.txt
-rw-r--r-- 3 zhangbo staff 12 11 16 16:49 test1.txt
zhangbodeMacBook-Pro:script zhangbo$ ./a.out
file unlinked
done
zhangbodeMacBook-Pro:script zhangbo$ ls -lc test*
-rw-r--r-- 2 zhangbo staff 12 11 16 16:59 test.txt
Three time fields are maintained for each file, Their purpose is summarized in the below.
st_atime last-access time of tile read -u (ls option ls -u )
st-mtime last-modification time of file date write
st-ctim last-change time of i-node status chmod,chown -c
Q4.10 in Section 4.22 how does the system’s limit on the number of open files effect the mighty function?
Opendir 打開一個目錄后，遞歸調用dopath函數。假設opendir使用一個文件描述符，并且只有在處理完目錄后才調用closedir釋放描述符，這就意味這每次將一級就要使用另外一個描述符。所以進程可以打開的最大描述符數就限制了我們可以遍歷的文件系統的深度。
Q4.11 In section 4.22, our version of ftw never changes its directory, Modify this routine so that each time it encounters a directory, it uses the chdir function to change to that directory. allowing it to use the filename and not the pathname for each call to stat. When all the entries in the directory have been processed, execute chdir(“..”) compare the time used by this version and the version int the next.
每次到要做兩次chdir,這樣會耗費系統的資源，感覺耗時。
Q4.12. Each process also have a root directory that is used for resolution of absolute phonemes.
this root directory can be changed with the chroot function. Look up the description for this function in your manuals when might this function be useful?
chroot 函數被英特網文件傳輸協議（FTP）程序用于輔助安全性，系統中咩有賬戶的用戶（匿名用戶）放在一個單獨的目錄下，利用chroot將目錄當著新的根目錄，就可以阻止用戶訪問此目錄之外的文件。
chroot也可以在另一臺機器上構造一個文件系統結構的副本，然后修改此副本更改原來的文件系統，這可以用于測試新軟件包的安裝（標準答案）
Q4.13 how can you set only one of the two time values with the utimes functions?
utimes 太老了，搞不定，就用了個utime.跟它差不多，功能是一樣的。
utime 的結構是
struct utimbuf
{
__time_t actime; /* Access time. */
__time_t modtime; /* Modification time. */
};
[root@clstore3 ~]# vim file.out
[root@clstore3 ~]# ls -al file.out
-rw-r--r--. 1 root root 13 Nov 18 18:25 file.out
[root@clstore3 ~]# ls -lu file.out
-rw-r--r--. 1 root root 13 Nov 18 18:25 file.out
[root@clstore3 ~]# ./a.out
運行后的時間，access time 時間沒有變化，但mod 時間變了，
[root@clstore3 ~]# ls -al file.out
-rw-r--r--. 1 root root 13 Nov 15 18:25 file.out
[root@clstore3 ~]# ls -lu file.out
-rw-r--r--. 1 root root 13 Nov 18 18:25 file.out
# cat zap.c -- 該程序來源于 http://m.blog.csdn.net/blog/zhoulaowu/14158137
#include <utime.h>
#include <sys/stat.h>
#include <stdio.h>
#include <stdlib.h>
int
main(int argc, char *argv[])
{
int i, fd;
struct stat statbuf;
char pathname[] = "/root/file.out";
struct utimbuf ubuf;
/*struct timespec times[2];*/
struct timespec times[2];
if (stat(pathname, &statbuf) == -1) {
printf("stat error for %s\n", argv[i]);
} else
{
ubuf.modtime = statbuf.st_mtime - 30000;
ubuf.actime = statbuf.st_atime ;
if ( utime(pathname, &ubuf) == -1 )
printf("utime error for %s\n", pathname);
}
exit(0);
}
Q4.14. some versions of the finger command output “new mail received …” and “unread since …” where …are the corresponding time and dates. How can the program determine these two times and dates
查看最后一次 access 時間 of a file.
Q4.15. Examine the archive formats used by the clio and tar commands. ( these descriptions are usually found in section 5 of the Unix programmer’s manual)how many of the three possible time values are saved for each file? when a file is restored, what value do you think the access time is set to. and why?
mtime and atime for tar.
tar 在抽取文件是，默認不改變文件的modify time，用戶的 access time 被修改。
[root@clstore3 test1]# tar -xf tar.tat
[root@clstore3 test1]# ls -l ---可以查看用戶的modify 時間，沒有被修改。
total 12
-rw-r--r--. 1 root root 0 Nov 19 15:51 blues --mtime 沒有被修改。
-rw-r--r--. 1 root root 0 Nov 19 15:51 folk
-rw-r--r--. 1 root root 0 Nov 19 15:51 jazz
-rw-r--r--. 1 root root 10240 Nov 19 17:35 tar.tat
[root@clstore3 test1]# ls -u
blues folk jazz tar.tat
[root@clstore3 test1]# ls -lu
total 12
-rw-r--r--. 1 root root 0 Nov 19 17:39 blues --atime 被修改為文件的抽取時間。
-rw-r--r--. 1 root root 0 Nov 19 17:39 folk
-rw-r--r--. 1 root root 0 Nov 19 17:39 jazz
-rw-r--r--. 1 root root 10240 Nov 19 17:35 tar.tat
[root@clstore3 test1]# date
Thu Nov 19 17:39:59 CST 2015
同樣的抽取是+M參數后，mtime and atime 都被改到被抽取的時間，可以看到mtime and atime 和現在的時間是一直的。
[root@clstore3 test1]# tar -mxf tar.tat
[root@clstore3 test1]# ls -al
total 20
drwxr-xr-x. 2 root root 4096 Nov 19 17:45 .
drwxr-xr-x. 4 root root 4096 Nov 19 17:28 ..
-rw-r--r--. 1 root root 0 Nov 19 17:45 blues
-rw-r--r--. 1 root root 0 Nov 19 17:45 folk
-rw-r--r--. 1 root root 0 Nov 19 17:45 jazz
-rw-r--r--. 1 root root 10240 Nov 19 17:35 tar.tat
[root@clstore3 test1]# ls -lu
total 12
-rw-r--r--. 1 root root 0 Nov 19 17:45 blues
-rw-r--r--. 1 root root 0 Nov 19 17:45 folk
-rw-r--r--. 1 root root 0 Nov 19 17:45 jazz
-rw-r--r--. 1 root root 10240 Nov 19 17:35 tar.tat
[root@clstore3 test1]# date
Thu Nov 19 17:45:14 CST 2015
Q4.16. Does the unix system have a fundamental limitation on the depth of a directory tree? To find our, write a program that creates a directory and then changes to that directory in a loop. Make certain that the length of the absolute pathname of the of the leaf of the directory is greater than your system’s PATH_MAX limit. Can you call getcwd to fetch the directory’s pathname? how do the standard UNIX system tools deal with this long pathname?
總體上說文件深度的應該是有限制的，但不同的系統限制也不同。
我的機器在到203多的時候就不能顯示了，就說結果太大了。mac and linux 大概路徑長度為1052個字符，然后就不行了。 但是mac 還是可以mkdir而且成功的。 unix 下就直接到203的時候不行了.
Linux and mac os pathname ~= 1052 字符
mac os 可以繼續創建文件夾，但linux 就不可以了。
new current directory is:Result too large
current directory level: 8667
mkdir successed.
new current directory is:Result too large
current directory level: 8668
mkdir successed.
new current directory is:Result too large
current directory level: 8669
mkdir successed.
[root@clstore3 ~]# tail test.txt | sed -n '5,7p'
current directory level: 203
mkdir successed.
new current directory is:/root/test/test/test/test/test/test/test/test/test/test/test/test/test/test/test/test/test/test/test/test/test/test/test/test/test/test/test/test/test/test/test/test/test/test/test/test/test/test/test/test/test/test/test/test/test/test/test/test/test/test/test/test/test/test/test/test/test/test/test/test/test/test/test/test/test/test/test/test/test/test/test/test/test/test/test/test/test/test/test/test/test/test/test/test/test/test/test/test/test/test/test/test/test/test/test/test/test/test/test/test/test/test/test/test/test/test/test/test/test/test/test/test/test/test/test/test/test/test/test/test/test/test/test/test/test/test/test/test/test/test/test/test/test/test/test/test/test/test/test/test/test/test/test/test/test/test/test/test/test/test/test/test/test/test/test/test/test/test/test/test/test/test/test/test/test/test/test/test/test/test/test/test/test/test/test/test/test/test/test/test/test/test/test/test/test/test/test/test/test/test/test/test/test/test/test/test/test/test/test/test/test
[root@clstore3 ~]# tail test.txt | sed -n '10p' | wc -c
1052
程序源碼
#include <sys/stat.h>
#include <unistd.h>
#include <limits.h>
#include <sys/stat.h>
#include <stdlib.h>
#include <string.h>
#include <stdio.h>
int main( int argc, char *argv[])
{
char path[1000];
char file[1000];
argv[1] = "test";
char *d ;
char *s = "/view";
int i;
getwd(path);
printf("current directory is: %s\n", path);
for ( i = 1; i <= 10000; i++){
printf("current directory level: %d\n", i);
if ( mkdir(argv[1], S_IRWXU|S_IRGRP|S_IXGRP|S_IROTH) < 0)
{
printf("mkdir failed\n");
return 2;
}
if(chdir(argv[1]) < 0 )
{
printf("chdir failed \n");
return 2;
}
getwd(path);
/*strcpy(path, argv[1]);*/
printf("mkdir successed.\n new current directory is:%s\n",path);
}
return 0;
}
Can you archive the directory using either tar or clio?
4.17. In section 3.16, we describe the /dev/fd feature. for any user to be able to access these files. their permissions must be rw-rw-rw. some programs that create an output file delete the file first, in case in already exists. ignoring the return code:
unlink(path);
if (( fd = create(path, FILE_MODE)) < 0 )
erro_sys(…);
what happens if path is /dev/fd/1 ?
系統直接拒絕我unlink
zhangbodeMacBook-Pro:script zhangbo$ ./a.out
unlink error: Permission denied
zhangbodeMacBook-Pro:script zhangbo$ ls -al /dev/fd
total 0
crw--w---- 1 zhangbo tty 16, 3 11 21 14:21 0
crw--w---- 1 zhangbo tty 16, 3 11 21 14:21 1
crw--w---- 1 zhangbo tty 16, 3 11 21 14:21 2
zhangbodeMacBook-Pro:script zhangbo$ cat delete_fd.c
#include <apue.h>
#include <fcntl.h>
#include <unistd.h>
#include <stdio.h>
char *path;
int fd;
int main(void)
{
path="/dev/fd/1";
if (unlink(path) < 0 )
err_sys("unlink error");
/*if ((fd = creat(path, FILE_MODE)) < 0 )
err_sys("hello this is error");*/
}
我手工去rm 1 的時候被拒絕，官方解釋是/dev 這個目錄下面的寫權限被關閉了，但我感覺感覺不是的，
我到/dev 下面去刪點別（/dev/fd and /dev/zero )的東西也可以。在測試機器上做的centos 6.2重啟過后又好了看來linux 還是有很強大的自我恢復功能的。
懇請看官有好的解釋通知俺一聲。
[root@client2 ~]# ls -al /dev/fd
lrwxrwxrwx. 1 root root 13 10月 21 08:40 /dev/fd -> /proc/self/fd
[root@client2 ~]# ls -al /dev/fd/
總用量 0
dr-x------. 2 root root 0 11月 21 01:29 .
dr-xr-xr-x. 8 root root 0 11月 21 01:29 ..
lrwx------. 1 root root 64 11月 21 01:29 0 -> /dev/pts/3
lrwx------. 1 root root 64 11月 21 01:29 1 -> /dev/pts/3
lrwx------. 1 root root 64 11月 21 01:29 2 -> /dev/pts/3
lr-x------. 1 root root 64 11月 21 01:29 3 -> /proc/53116/fd
[root@client2 ~]# ls -al /proc/self/fd
總用量 0
dr-x------. 2 root root 0 11月 21 01:29 .
dr-xr-xr-x. 8 root root 0 11月 21 01:29 ..
lrwx------. 1 root root 64 11月 21 01:29 0 -> /dev/pts/3
lrwx------. 1 root root 64 11月 21 01:29 1 -> /dev/pts/3
lrwx------. 1 root root 64 11月 21 01:29 2 -> /dev/pts/3
lr-x------. 1 root root 64 11月 21 01:29 3 -> /proc/53129/fd
zhangbodeMacBook-Pro:script zhangbo$ ./a.out
unlink error: Permission denied
zhangbodeMacBook-Pro:script zhangbo$ ls -al /dev/fd
total 0
crw--w---- 1 zhangbo tty 16, 3 11 21 14:21 0
crw--w---- 1 zhangbo tty 16, 3 11 21 14:21 1
crw--w---- 1 zhangbo tty 16, 3 11 21 14:21 2
免責聲明：本站發布的內容（圖片、視頻和文字）以原創、轉載和分享為主，文章觀點不代表本網站立場，如果涉及侵權請聯系站長郵箱：is@yisu.com進行舉報，并提供相關證據，一經查實，將立刻刪除涉嫌侵權內容。
億速云公眾號
手機網站二維碼
